|
: what is the taper on ES2026R??? Bad Karma 10-09-2001, 12:39 PM Was going to use ES2026R and ES2027L for my drag link but the ends wouldn't fit the holes that are reamed in my steering arms and pitman arm (too big). The ES2010L and ES2234R tie rod ends fit perfectly..... So anyone know what the proper taper is? borton 10-09-2001, 02:17 PM isn't the taper the same, just the size of the hole is bigger, meaning they sunk the reamer in further. Ben W 10-09-2001, 02:29 PM Originally posted by Brent (aka)borton: <STRONG>isn't the taper the same, just the size of the hole is bigger, meaning they sunk the reamer in further.</STRONG> yep. ErikB 10-09-2001, 02:40 PM Originally posted by Brent (aka)borton: <STRONG>isn't the taper the same, just the size of the hole is bigger, meaning they sunk the reamer in further.</STRONG> Double yep. ROKTOY 10-09-2001, 08:49 PM ES2026R 1.5/FT top = .793 bottom = .715 ES2010R 1.5/FT top = .775 bottom = .675 Jay | |