Anyone know. They seem to vary a little but can't remember if they were 31" or what.

Thanks

Originally posted by 66CJdean
Anyone know. They seem to vary a little but can't remember if they were 31" or what.

Thanks

I believe it was 30.75" or was that 31.75" :confused: I've posted the right numbers in here before :flipoff2: SEARCH;)

Dammit i knew it until i read BigDudes post & he cornfused me:confused:

I think its 31.75" dont hold me to that though.:beer:

I don't think it is that wide because the waggy 44 is 32 and I know it doesn't just drop in so I am thinking 30.5 or so???

I outboarded my YJ 1/2" each side for a Waggy 44, but I think I was a little off, it might be 31.125"

Mine measures 30.75" center to center up front :beer:

Yep, I rounded up to 31.
dion

Cool. 30.750 or 31 is the same thing to me. I have an RC60 I am cutting down to sell and just want to know how much to cut off.

Dean, if memory serves, we cut 3 5/8 inches off the pass. side of my RC front 60. We also inboarded the driver's side perch into the pumpkin as far as possible. Hope that helps.
Dion

I think it will be 5.250" that I will cut off the long side. This is a nwere 60 so it has the 36" spring centers (I think 36) so 36-30.750= 5.250 of diference. I know the older 78/79 ones used a 32" spring center but I am not sure about the newer ones but I think it is 36"

30.75 on mine

Dean, mine is a newer one as well, ~36-inch spring center. We were able to inboard the driver side perch a bit more than an inch and took 3 5/8 inches off the long side.

Ended up with an outside track width of 80 inches (using 38.5x14.5 SX) and having FULL turning radius. (Don't ask me how).
Dion