Lil'John
08-20-2002, 07:31 PM
Excuse the semi newbie question here :p
I am curious if any of the Zuki front axle parts are usable on a yota front axle or vise versa.
For example:
Knuckles
Spindles
Knuckle studs and cone washers
inner axle shaft
I have heard that the hubs are interchangable part of them is changed(birfield spline difference)
Also, on the inner axle shafts, does someone have a diameter, spline count and length for each side?
TIA and excuse me while I head to the wrecking yard,
John
Rockrat
08-20-2002, 07:45 PM
Originally posted by Lil'John
Excuse the semi newbie question here :p
I am curious if any of the Zuki front axle parts are usable on a yota front axle or vise versa.
For example:
Knuckles
Spindles
Knuckle studs and cone washers
inner axle shaft
I have heard that the hubs are interchangable part of them is changed(birfield spline difference)
Also, on the inner axle shafts, does someone have a diameter, spline count and length for each side?
TIA and excuse me while I head to the wrecking yard,
John
to answer your ? NO completely diff like sizing a pennie to quarter
NO same as above
Not sure the toy uses studs zuki has bolts
cones to small
No axles shft no comp. Toy BIIIIIG zuki smaaaaaal
punkskalar
08-20-2002, 08:53 PM
Ive got ZUK Birfs, Inner Shafts and Hubs all Sitting here... I've also got a complete Toy axle in every possible piece all over the garage right now.... Nothing is similar, and nothing will swap, and no, the cones aren't the same... If you are looking for ZUK axles and such, PM me... Like above, Pennies to Quarters man...
SJ410Bark
08-20-2002, 11:27 PM
Originally posted by Rockrat
to answer your ? NO completely diff like sizing a pennie to quarter
NO same as above
Not sure the toy uses studs zuki has bolts
cones to small
No axles shft no comp. Toy BIIIIIG zuki smaaaaaal
DITTO
0ILBURNER
08-21-2002, 06:13 AM
Even the lug nutz are different....
4004ever
08-21-2002, 09:40 AM
Thats not completely true. You could use the spring perches if you cut and spread them!:D
GBRAVO
08-21-2002, 10:18 AM
Only the oil is the same on both:D :D
Splines, bearings, depths, all is different
TNToy
08-21-2002, 11:28 AM
Originally posted by 0ILBURNER
Even the nutz...
Leave your nuts out of this, sicko.
Lil'John
08-21-2002, 07:26 PM
Thanks for all the info... except about some guys nutz:flipoff2: :flipoff2:
Now I know more than I wanted to know about a suzuki :p