Diff Covers New Lower Price! $90 plus flat $10 to ship!

[Greatlakeoffroad]

Well, in the 5 years we have been producing these there have been alot of changes and updates to our line. I thought that we should try and get alot of pictures and all of our options laid out so everyone could see them in one place. And lastly we have reduced our pricing due to steel falling back in line where it was before, so we are passing along the savings to you. Just a better deal all the way around! No fancy gimics or fuzzy numbers to mess w/. Our best price right here for our best customers only on PBB not all over the net!

Shipping we can combine shipping to save you money! We ship via USPS flat rate box when possible.

So here are our specs................ all for $90.00 per cover

- Bolt ring 1/2" thick (we engineer strength where it is needed) we are the only one to manufacture a cover w/ this kind of beef. We do not start w/ thinner mtl weld it unfixtured. Let it warp to kingdom come and then machine it thinner. Only to claim it is thicker than what it ends up being. We build them the correct way the first time around.

- 1 pc machined fill plug, placed for added oil capacity

- 1/4" thick one piece cnc formed cover (why not thicker? read the warranty)

Only at Glo x-tra cost options......................

- Counterbored mount holes (yes all of them, for a clean quality look)

- Integrated drain (ever cross deep water? Drain it out replace fluid and go)

- 1/2" mid plating severe abuse, makes a nice hydro steer mounting point

- Upper Truss Tab (nice for hooking into your homemade truss)

- And everything in between

Models available
Dana 80
Dana 70
Dana 60
Dana 44
14 bolt 10.5" R&P
14 bolt 11.5 R&P (to be released week of 8-25-06)
Ford Sterling
Ford 8.8

Warranty ( No B.S. Fine Print )
You break it under use we replace it and add you to the hall of fame as it has never been done in the last 5 years. Our design has been engineered for strength. We weld these the proper way utilizing machined fixtures

Sampling of a customers 14 bolt and D-60 diffs
http://www.pirate4x4.com/forum/attachment.php?attachmentid=259472&d=1156032049

He ordered all of our options as you can see from this pic
http://www.pirate4x4.com/forum/attachment.php?attachmentid=259473&stc=1&d=1156032244

Scroll Down to see what all we offer

[Greatlakeoffroad]

http://www.pirate4x4.com/forum/attachment.php?attachmentid=401355&stc=1&d=1226112374

http://www.pirate4x4.com/forum/attachment.php?attachmentid=401357&stc=1&d=1226112374

[Offroad-Geo-Pirates]

Price for 3 dana 44 with everything but truss mounts to 85354

[Greatlakeoffroad]

You have a PM Thanks Shawn

[hivolt lineman]

Just bought mine last week at full price but that's fine after I saw the quality. We'll be doing all our business with you from now on. Keep up the great work.
Brian B.
Benton AR

[wsmithduramax]

hey there what kind of price am i looking at for a Dana 44 and 14 bolt semi floater if available, and also for a 14 bolt 11.5 r&p to 80550

[Greatlakeoffroad]

Thank you, let me know if you need to set up a vendor account. Thanks Shawn

Just bought mine last week at full price but that's fine after I saw the quality. We'll be doing all our business with you from now on. Keep up the great work.
Brian B.
Benton AR

[hivolt lineman]

We may need to do that. I'll call you tomorrow. Awesome product! Took a hard lick Saturday and didn't even scratch it.

[Daves]

Shawn, I bought it today how long to get it?

[Greatlakeoffroad]

Sounds good, Thanks Shawn

We may need to do that. I'll call you tomorrow. Awesome product! Took a hard lick Saturday and didn't even scratch it.

[Greatlakeoffroad]

You have a PM, cover is getting final maching w/ a large batch of covers today. Thanks Shawn

Shawn, I bought it today how long to get it?

[MO_4RUNNER]

Do you have the 60 covers in stock to ship?

[Greatlakeoffroad]

I'm sure we can get you taken care of, you have a PM. Thanks Shawn

Do you have the 60 covers in stock to ship?

[Greatlakeoffroad]

Thanks for the order!

Do you have the 60 covers in stock to ship?

[Super Steve]

price for D60 with 1/2 in pinnion plate shipped to 06457

[Greatlakeoffroad]

You have a PM, Thanks Shawn

price for D60 with 1/2 in pinnion plate shipped to 06457

[Greatlakeoffroad]

Thanks for the orders guys! Just a great product at an even better price!

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

Amazing what a little discount will bring. Thanks for the orders guys!

[Greatlakeoffroad]

ttt

[tworbotalon]

I am interested in buying two diff covers.
1 dana 70 cover with drain plug, and 1 Ford sterling 10.5 cover with drain plug.
Thanks, Pat

[Greatlakeoffroad]

You have a PM, Thanks Shawn

I am interested in buying two diff covers.
1 dana 70 cover with drain plug, and 1 Ford sterling 10.5 cover with drain plug.
Thanks, Pat

[Stoodty]

paypal'd ya thanks!

[Greatlakeoffroad]

Thanks for the orders! Been a very busy week thus far!

[imcochrane]

price for a dana 60 cover with out the drain, and shipped to 98844, thanks, Matt

[Greatlakeoffroad]

That would be a flat $100.00 delivered and you have a PM w/ all the details! Thanks Shawn

price for a dana 60 cover with out the drain, and shipped to 98844, thanks, Matt

[Daves]

Can you call me, we need to talk.

[NOVIFEDCOUPE]

I am still waiting on my tracking number that you were supposed to get me friday! Please let me know something on my order. I have sent a couple of pm's with no response since friday.

[Greatlakeoffroad]

Both of you have PM's Thanks Shawn

[Daves]

You have a PM as well:D

[fordxranger]

can I see a pic of a ford 8.8 cover?

[Greatlakeoffroad]

can I see a pic of a ford 8.8 cover?

Ford 8.8 GLO style

[Daves]

You have a pm

[Offroad-Geo-Pirates]

I havent heard any reply from you in 2 weeks after I sent you my money...Before that every day I would get a PM, What going on ? Im getting a bit apprehensive. Im hoping I get a reply today...

[Greatlakeoffroad]

Everyone has been taken care of, Thanks Shawn

I havent heard any reply from you in 2 weeks after I sent you my money...Before that every day I would get a PM, What going on ? Im getting a bit apprehensive. Im hoping I get a reply today...

[Greatlakeoffroad]

ttt

[JohnnyU]

Shawn, Anything for the AAM 9.25 or 11.5 in the works yet?

[Greatlakeoffroad]

call me we sure do!

[gabeoffroad]

bump. talked to these guy's sunday, very good customer service.

[Offroad-Geo-Pirates]

Got these in the Mail today... These are bigger than I thought they would be....Talk about Beefy, I ordered all the options and I am Glad I did...
Cant wait till this weekend so I can put these in and try to be the first to use the Warranty....I recommend these to anyone who wants Bullet Proof Protection.. Check out this write-up from JP mag http://www.jpmagazine.com/techarticles/drivetrain/154_0708_bulletproof_test/photos.html

Thanks Again Shawn :flipoff2: :D

[Greatlakeoffroad]

you the man! Thanks Shawn

[Greatlakeoffroad]

ttt

[REDDMANIAC]

you can use this pic in your website if you like it, couldnt get the lines as crisp as I wanted, just wish it was counter bored. Now to install it this week after my test.

[Greatlakeoffroad]

This is a good example of an option you seldom see that we do. It is a lower 1/2" plating, it allows for those close tie rod clearance issues to be resolved and still have a extremely thick area to take some severe abuse. Stan at Branik MotorSports uses his as a ramp on his XXRA buggy! Thanks Shawn

[BuzzerPB]

can i get a cost list for the extra options?
cost for cover still $90+ship? D44 ford
----------------------------------------------------------
Counterbored mount holes (yes all of them, for a clean quality look)

- Integrated drain (ever cross deep water? Drain it out replace fluid and go)

- 1/2" mid plating severe abuse, makes a nice hydro steer mounting point

- Upper Truss Tab (nice for hooking into your homemade truss)

- And everything in between

[Greatlakeoffroad]

Thanks for the orders guys!

[weakassjeep]

Price for two d60 covers both with Integrated drains and 1/2" mid plating shipped to 95691 please.

[Greatlakeoffroad]

You have a PM, Thanks Shawn

[Greatlakeoffroad]

Some people keep beating a dead horse about the difference between counterbored and countersunk and strength. If you want my sincere opinion for the strongest fastener (and yes this answer will cost me money telling you), use a stud and a nut. Long set screws (are typically grade 8 even) locktited into the housing and using a nut and lock washer will be the strongest hold you can put on a cover. I know this because I wheel and have mounted everything from cylinders to front end tie down points to my covers. Machine screws (socket or countersunk) have a tendancey to stretch when extreme force has been applied or shocked into the fastener. Why do i know this? Because I have wheeled and have doen this very exact thing. Most guys who have been around mechanically for awhile also know countersunk machine screws have a habit of seizing up after they get wet a couple of times making it extremely hard to remove them. Just a couple of honest thoughts since we decide to cover this subject once again.

[Greatlakeoffroad]

ttt

[zone1090]

please quote "2" dana 44 with drains. ship to 21804 thanks John

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

Thanks for the orders guys!

[Greatlakeoffroad]

9.25 due out in the next week or so, spy pics shortly.....................

[MTUBlaZeR2]

Quote for a 14 bolt - 11.5" - no drain. Shipped to 44667.


Thanks!

[Greatlakeoffroad]

$100.00 delivered! Thanks Shawn

Quote for a 14 bolt - 11.5" - no drain. Shipped to 44667.


Thanks!

[Greatlakeoffroad]

Thanks for the orders guys!

[jetboatjeff]

Shawn, I received my two Diff covers today, these things are awsome! the quality is excellent and the welds look like they were done by a machine. Thanks Again! Jeff

[Greatlakeoffroad]

Thanks for the props Jeff. Yes, we have one guy who welds for us and the welding is flawless as you have stated. We offer a no BS no fine print warranty. You break it we replace it. We have set the bar high for diff covers on strength and quality. This is why we do not need to weld both inside and out. If you weld the one side correctly that is all you need the other is just more weight. Thanks Shawn

[laybac101]

12 bolt with a drain plug to 95954

[Greatlakeoffroad]

We currently do not build a 12 bolt. Thanks Shawn

[laybac101]

We currently do not build a 12 bolt. Thanks Shawn

dang that sucks, no one really does, maybe a market there:smokin:

[Greatlakeoffroad]

sorry

[Greatlakeoffroad]

don't forget about our special thru the 1st http://www.pirate4x4.com/forum/showthread.php?t=788119 however if you only need one cover we can get you taken care of right here. Hope to see you guys on the trail this weekend and maybe you can win some of our product too in various raffles across the country!

[80fsj]

Option and price list for Dana 60 and 14 bolt please!

[Greatlakeoffroad]

http://www.pirate4x4.com/forum/showthread.php?t=788119 if you need two covers this is a link to our sale on PBB right now, covers and options are both on discount. All of our options are listed on the first page of this post. I will refresh it to the end here for you also. Let me know if we can help you. Thanks Shawn

[Greatlakeoffroad]

here you go..........

Well, in the 5 years we have been producing these there have been alot of changes and updates to our line. I thought that we should try and get alot of pictures and all of our options laid out so everyone could see them in one place. And lastly we have reduced our pricing due to steel falling back in line where it was before, so we are passing along the savings to you. Just a better deal all the way around! No fancy gimics or fuzzy numbers to mess w/. Our best price right here for our best customers only on PBB not all over the net!

Shipping we can combine shipping to save you money! We ship via USPS flat rate box when possible.

So here are our specs................ all for $90.00 per cover

- Bolt ring 1/2" thick (we engineer strength where it is needed) we are the only one to manufacture a cover w/ this kind of beef. We do not start w/ thinner mtl weld it unfixtured. Let it warp to kingdom come and then machine it thinner. Only to claim it is thicker than what it ends up being. We build them the correct way the first time around.

- 1 pc machined fill plug, placed for added oil capacity

- 1/4" thick one piece cnc formed cover (why not thicker? read the warranty)

Only at Glo x-tra cost options......................

- Counterbored mount holes (yes all of them, for a clean quality look)

- Integrated drain (ever cross deep water? Drain it out replace fluid and go)

- 1/2" mid plating severe abuse, makes a nice hydro steer mounting point

- Upper Truss Tab (nice for hooking into your homemade truss)

- And everything in between

Models available
Dana 80
Dana 70
Dana 60
Dana 44
14 bolt 10.5" R&P
14 bolt 11.5 R&P (to be released week of 8-25-06)
Ford Sterling
Ford 8.8

Warranty ( No B.S. Fine Print )
You break it under use we replace it and add you to the hall of fame as it has never been done in the last 5 years. Our design has been engineered for strength. We weld these the proper way utilizing machined fixtures

Sampling of a customers 14 bolt and D-60 diffs
http://www.pirate4x4.com/forum/attachment.php?attachmentid=259472&d=1156032049

He ordered all of our options as you can see from this pic
http://www.pirate4x4.com/forum/attachment.php?attachmentid=259473&stc=1&d=1156032244

Scroll Down to see what all we offer

[JM1914Tn]

Quote on 14ff 10.5, welded and shipped to 37919?

[2001TJ]

price on a dana 44 cover with drain plug shipped to 28607

[jp800@verizon.net]

will it fit a 1989 ford front axle dana 60 high pinion?
also can you advise me on posting on here?
When i click on post a flag tells me I am not authorise to post.....why?
do i need to pay?

[Greatlakeoffroad]

it will fit, not sure on the other.

will it fit a 1989 ford front axle dana 60 high pinion?
also can you advise me on posting on here?
When i click on post a flag tells me I am not authorise to post.....why?
do i need to pay?

[jodyfj40]

need price for 60 and 70 with drain and recessed bolts to 27893.
thanks
jody

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

thanks for the orders guys!

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

Soon to release two more designs!

[jghflys]

Please provide the price for Dana 44 cover with drain, and 9" pinion guard shipped to 72802. Thanks, James

[laybac101]

have you started to make any for a gm 12 bolt yet????

[Greatlakeoffroad]

Not yet however it is in the works! Thanks Shawn

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

New cover due on the shelf this week!

[laybac101]

have you started to make any for a gm 12 bolt yet????

Not yet however it is in the works! Thanks Shawn

let me know when you do. :D

[Greatlakeoffroad]

ttt

[zbd]

Price for a 9" pinion guard shipped to 98059 please

[Greatlakeoffroad]

I sent you a PM also, however in case you look these are always $65.00 delivered. Thanks Shawn


Price for a 9" pinion guard shipped to 98059 please

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

Thanks for the orders today!

[Greatlakeoffroad]

A bump for a new month! Same great price and quality!

[CJ_heath]

Can I get a quote on a Dana 44 with countersunk holes, delivered to 72764?

[Greatlakeoffroad]

You have a PM, Thanks Shawn

[Grendel]

Hey Shawn, I need two D60 covers.

[Greatlakeoffroad]

Sale thru this weekend is $170.00 delivered for 2 covers. I sent you a PM let meknow. Thanks Shawn

[KeithP]

Will your cover work on the front Dana 44 in a 2003 Rubicon without having steering clearance issues?

[Greatlakeoffroad]

Yes!

Will your cover work on the front Dana 44 in a 2003 Rubicon without having steering clearance issues?

[e.gentle]

quote to 35805 with all options minus truss mount for a 14bt. same as pics.

[BamaScout]

Yes!

sent you a PM and left you a message on the phone yesterday. hollar back please.

[core4wd]

Price on 14bolt cover with countersunk to 23456....

[Greatlakeoffroad]

You have a PM! Thanks Shawn

[Greatlakeoffroad]

These are red hot and going out the door fast this week! Thanks guys! Shawn

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

bump

[Greatlakeoffroad]

Thanks for the orders PBB!

[Whiten]

shawn, just checkin on when my d60 cover going to ship, thanks

[Greatlakeoffroad]

already has via USPS flat rate box. Thanks Shawn

shawn, just checkin on when my d60 cover going to ship, thanks

[Greatlakeoffroad]

Multiply covers on the shelf ready to go!

[Greatlakeoffroad]

ttt

[BDRC]

Thanks Shawn!

http://i19.photobucket.com/albums/b187/blackdog4x4/08-27-09_1855.jpg

[Greatlakeoffroad]

Sweet! Thanks for the pics!

[N8-Daag]

price for 14 bolt cover, with bored holes and extra thick cover ring. shipped to 63011, does this come welded? thanks -nate

[Greatlakeoffroad]

I will send you a PM, all of our covers come welded this is not an option as we guarantee all our covers w/ a lifetime warranty. Thanks Shawn

price for 14 bolt cover, with bored holes and extra thick cover ring. shipped to 63011, does this come welded? thanks -nate

[jtr]

Sent money for (2) 14 bolt standard covers.

Thanks

[Greatlakeoffroad]

Thanks for the order!

[Whiten]

got mine last week, very beefy thanks shawn

sorry crappy cell pic
http://i526.photobucket.com/albums/cc349/Whiten_photos/dif2.jpg

[brad@LIU]

Price for D60 with drain plug and counter sunk mounting holes, 14b with drain plug and counter sunk mounting holes, 14b pinion guard and your new 14b yoke straps.

Shipped to 39520.

[Greatlakeoffroad]

You have a PM, Thanks Shawn

Price for D60 with drain plug and counter sunk mounting holes, 14b with drain plug and counter sunk mounting holes, 14b pinion guard and your new 14b yoke straps.

Shipped to 39520.

[Greatlakeoffroad]

We have a new option due to release very soon! We have always had the reputation as having the tougest covers on the market and we are going to keep up that rep plus ad that we have the most technically advance covers out here as well.

[no_bs]

Price for a D60 cover with thick cover ring and a set of your 14b disc brackets to 18054. Thanks

[Greatlakeoffroad]

Thanks for the additional orders!

[Greatlakeoffroad]

ttt

[DJ404564X4]

front Superduty 60

loaded
Counterbored mount holes

- Integrated drain

- 1/2" mid plating severe abuse,


and a 14 bolt pinion gaurd
to 92264

[Stepmaker78]

Are your covers welded on the inside as well as the outside.
Thanks

[Greatlakeoffroad]

Outside only, and we know how to weld. If you weld them correctly as we do you do not need to weld them both inside and out. Plus the fact we have a no B.S. no fine print warranty. You break it we replace it. Ask around you won't find any takers on that warranty and we have been doing this close to 10 years now. Thank Shawn

Are your covers welded on the inside as well as the outside.
Thanks

[Greatlakeoffroad]

ttt

[Greatlakeoffroad]

No BS no Fine Print Guarantee!

[jeep09]

2 dana 60 covers drains, shipped to 98295

[Greatlakeoffroad]

Thanks for the orders guys!

[swdockter]

Front and rear stock dana 60s? Shipped to 60175? Still got that $170 for two :) ?

Scott

[Greatlakeoffroad]

You have a PM, Thanks Shawn

[Greatlakeoffroad]

ttt

[YJ-N-WV]

dana 30

[Greatlakeoffroad]

Sorry, we do not carry that axle model only 44 and up. Thanks Shawn

[laybac101]

Not yet however it is in the works! Thanks Shawn

its been a few more months now. any progress on a gm 12 bolt?

[danny Israel]

Can you do a dif cover for a 14 dolt that is shaved. . All the bolt holes are still there. I gust removed the rock Anker off the bottom.

http://i202.photobucket.com/albums/aa233/dannyisrael_2007/IMG_4119.jpg

http://i202.photobucket.com/albums/aa233/dannyisrael_2007/IMG_4553.jpg

[Greatlakeoffroad]

Here is a good picture of how are bolt ring/cover is direct from us ( it is shaved already to accomodate a shave housing ) Let me know if this will work for you. I do not believe this customer shaved his diff and you can see where are ring is in relation to the actual standard housing. So I think w/ our cover and a flap disc you could easily accomodate what you have already done on your housing. Thanks Shawn

edit: we also make a very nice pinion / yoke guard for this axle as well. Lifetime warranty on both units! Link http://www.pirate4x4.com/forum/showthread.php?t=359056

Thanks Shawn




[QUOTE=danny Israel;10525579]Can you do a dif cover for a 14 dolt that is shaved. . All the bolt holes are still there. I gust removed the rock Anker off the bottom.

[Solidaxlesub]

are you guys gonna make covers for the aam axles in a newer dodge? i would buy a pair!

[danny Israel]

Here is a good picture of how are bolt ring/cover is direct from us ( it is shaved already to accomodate a shave housing ) Let me know if this will work for you. I do not believe this customer shaved his diff and you can see where are ring is in relation to the actual standard housing. So I think w/ our cover and a flap disc you could easily accomodate what you have already done on your housing. Thanks Shawn

edit: we also make a very nice pinion / yoke guard for this axle as well. Lifetime warranty on both units! Link http://www.pirate4x4.com/forum/showthread.php?t=359056

Thanks Shawn




[QUOTE=danny Israel;10525579]Can you do a dif cover for a 14 dolt that is shaved. . All the bolt holes are still there. I gust removed the rock Anker off the bottom.
How much for that and a dana 44 dif cover shiped to 87401.

[Greatlakeoffroad]

You have a PM, Thanks Shawn

[QUOTE=Greatlakeoffroad;10526855]Here is a good picture of how are bolt ring/cover is direct from us ( it is shaved already to accomodate a shave housing ) Let me know if this will work for you. I do not believe this customer shaved his diff and you can see where are ring is in relation to the actual standard housing. So I think w/ our cover and a flap disc you could easily accomodate what you have already done on your housing. Thanks Shawn

edit: we also make a very nice pinion / yoke guard for this axle as well. Lifetime warranty on both units! Link http://www.pirate4x4.com/forum/showthread.php?t=359056

Thanks Shawn





How much for that and a dana 44 dif cover shiped to 87401.

[4x4_4go]

Front and rear ford dana 60s. Shipped to 59034. Thanks

[Greatlakeoffroad]

You have a PM, Thanks Shawn

Front and rear ford dana 60s. Shipped to 59034. Thanks

[Greatlakeoffroad]

ttt

[BikeGuy]

How much for an 8.8 with: lower 1/2" plating & Drain plug shipped to 80017?
How far back does the cover extend from the axle housing (not figuring in the lower 1/2" plating)?
The Riddler cover I have right now hits my Tank skid on 80-100% compression, so I looking for a closer fitting cover.

Thanks, Randy


.

[Greatlakeoffroad]

I will get you a measurement yet today, I would say if you want it to fit close to forget the 1/2" plating though. I have one on the shelf I will get a measurement. Thanks Shawn


How much for an 8.8 with: lower 1/2" plating & Drain plug shipped to 80017?
How far back does the cover extend from the axle housing (not figuring in the lower 1/2" plating)?
The Riddler cover I have right now hits my Tank skid on 80-100% compression, so I looking for a closer fitting cover.

Thanks, Randy


.

[Greatlakeoffroad]

No fuzzy Math, Just an above market quality product at below market price! We can combine shipping and save even more. PM me for a quote! Thanks Shawn

[Greatlakeoffroad]

New Option most are unaware of, lower 1/2" plating. This protects lower bolts and helps build a ramp out of our cover! This has been race proven tried and true!

[jeepinwilson]

how about 1 14 bolt cover with countersunk holes, and a Dana 60 with countersunk holes shipped to 64015. I am ready to buy, I left a voice mail message the other day and have not heard back.

[Greatlakeoffroad]

You have a PM, sorry we missed you thought we had everyone covered. Thanks Shawn


how about 1 14 bolt cover with countersunk holes, and a Dana 60 with countersunk holes shipped to 64015. I am ready to buy, I left a voice mail message the other day and have not heard back.