: tacoma 3rz 2.7 motor and drivetrain FS...


alienjeep
01-19-2009, 07:01 PM
motor still in the taco, runs great, just took it out wheeling a week ago. getting ready to drop a sbc so i need this gone.
the motor has about 130k miles, doesn't leak any oil, starts right up, basic tune up, wires spark plugs, brand new fan clutch, and fuel filter, needs a ps pump i was running a psc one but i'm keeping it. it also comes with LC Eng. headers. there is no air box, i run a custom intake to inside the cab, you;ll get the maff but no airbox or tube. all wiring and ecu will come with it. motor has the new oil pan for those who are gonna use it with a solid axle. if you want the cat and o2's let me know and i'll send those too.

$900 plus the ride. (might be able to deliver somewhere from IL to NC for some xtra cash, maybe)

tranny and tcase (would like to keep together)
5 speed tranny shifts great, complete with clutch, flywheel etc.
tcase has the bud build clocking ring so it sits flat and you can run a flat skid plate, it will also come with the FROR cross member modified now to the tcase so it sits flat.

$600

everything is BO and plus the ride.:D

thanks.

alienjeep
01-20-2009, 04:06 PM
ttt

alienjeep
01-20-2009, 05:51 PM
i would trade the motor for some 39s or 42s iroks.

mtnkid85
01-20-2009, 07:15 PM
shot in the dark here but if you want to part the rearsump oilpan/pickup ect Id be all over them. Let me know via PM, as Ill probally forget to check your thread.

Thanks

I could also trade you for all the front sump components if need be.

alienjeep
01-21-2009, 03:44 PM
btt

junkrunner
01-21-2009, 04:16 PM
Interested in any trades? 14'' fox airshocks and some $$?

alienjeep
01-21-2009, 04:23 PM
i already have airshocks and CO's, sorry.

alienjeep
01-23-2009, 09:07 PM
Interested in any trades? 14'' fox airshocks and some $$?

i sent you a pm, let me know.

alienjeep
01-25-2009, 10:47 AM
btt

yotamaster98
01-25-2009, 02:10 PM
Funny question I would be interested in the Cat and the o2 sensor

alienjeep
01-25-2009, 02:51 PM
need to find engine buyers first, if they don't want it i will sell all that afterwards.
thx.

alienjeep
01-26-2009, 10:17 AM
ttt

PoopHead
01-27-2009, 04:05 PM
Any idea on shipping prices for the motor to sumas, Wa? 92895

SSLT1KID
01-27-2009, 05:01 PM
i wish you were closer. how much to ship to 93536?

alienjeep
01-27-2009, 09:25 PM
the best i can tell you, i don't have a way to find out shipping quotes, in the past i used forward air and they were fairly cheap. if you can look on their website to see if you have a location near you that you can pick up, i can put the engine on a pallet and drop it off, for what i heard the engine is not much than 350 pounds.
let me know.
thx

alienjeep
02-03-2009, 06:59 PM
motor is SOLD!!! tranny and tcase still up for sale.

tranny and tcase (would like to keep together)
5 speed tranny shifts great, complete with clutch, flywheel etc.
tcase has the bud build clocking ring so it sits flat and you can run a flat skid plate, it will also come with the FROR cross member modified now to the tcase so it sits flat.

$600 OBO