H1 WHEEL CENTERS AND H1 ROCK RINGS best price on the net!!!!!!!!!!!

[MAD MAC]

H1 Flat Wheel Centers

Our Centers fit both 8 and 12 bolt wheels!!!

Manufactured from U.S.A steel Grade 1045
Our centers are available in all popular wheel bolt patterns along with Rockwells and UNIMOG patterns

Laser Cut Precision

3/8 Thick (1/2 is available if requested)

ALL Centers come countersunk for accurate lug nut seating.

$38.50 Each
http://i50.photobucket.com/albums/f302/56462/rockwellconversion012.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion032.jpg



H1 8 AND 12 BOLT ROCK RINGS

Our Rock Rings fit 8 bolt and 12 bolt wheels

Manufactured from U.S.A steel Grade 1018

Laser Cut Precision

1/4 Thick

$28.50 Each
http://i50.photobucket.com/albums/f302/56462/rockwellconversion011.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion029.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion030.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion035.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion036.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion041.jpg
http://i50.photobucket.com/albums/f302/56462/rockwellconversion023.jpg

[shotmobile]

What is the maximum back spacing can you get with these centers?

[MAD MAC]

max would be around 5 inches min will be about 2

[shotmobile]

That's great. Have you thought about putting small half circles around the outside edge of the centers like you did with the rock rings, so the water and mud can exscape and be easily be washed out?

How about a quote for 4 shipped to 98296. Thanks.

[MAD MAC]

That's great. Have you thought about putting small half circles around the outside edge of the centers like you did with the rock rings, so the water and mud can exscape and be easily be washed out?

How about a quote for 4 shipped to 98296. Thanks.

4 rings or centers or both??

[shotmobile]

4 rings or centers or both??

Sorry. Just 4 of the centers.

[MAD MAC]

Check your pms fellas

[itchy]

Are you recentering wheels as well, or just selling the centers and rings?
If not how much for 4 centers and rings shipped to 48183.
Or if its possible I'm just north of Monroe, I could pick them up to save me some shipping if that would be ok. Thanks, Keith.

[MAD MAC]

I work in newport if you wana meet some place?

mac

[momar]

4 rings to 94538

thanks

[scottjkj1]

4 centers to 85704, Thx

[MAD MAC]

Check your Pm's fellas

[Stomperbob1]

Hey there Mad Mac I would like a quote on 4 of your flat centers 2 of them I need in a 8x170mm lug pattern and the other 2 in a 8x6.5 lug pattern. Shipped 2 40324 Thanks Bob

[wheelerpeeler]

Do you have the rock patern for the centers? Or just 8 lug! "Thanks"

[itchy]

Just picked up my centers and rings today.
Seriously guys if your lookig into getting these the are worth the money. Very nice product, and great guy to deal with. Thanks for the goods Mac.:)

[MAD MAC]

Just picked up my centers and rings today.
Seriously guys if your lookig into getting these the are worth the money. Very nice product, and great guy to deal with. Thanks for the goods Mac.:)

Thanks for stopping by Keith Let me know when you get that Heep done!!!!

Mac

[Wheel28]

Can I get a quote for 4 centers to 77584?

thxs Will

[MAD MAC]

Pm's have been sent!!!!!

[MAD MAC]

12 bolt ROCKRINGS are now available!!!!!!!!!

[MAD MAC]

Have lots of these in stock and ON SALE!!!!!!!!!!!!!!!

[MAD MAC]

ttt

[86k30]

could I get a quote on 1 set of 8 X 6.5 centers and 3 sets of the 60 kingpin bushings shipped to buisness addy 72908???

[Copasetic]

PM for 5 centers sent. Thanks!

[fossild2]

4 centers shipped to 27519

[MAD MAC]

Check your pm's fellas

[JJ3]

centers available in 6 on 5.5? if so 4 centers and 4 rings to 37416

[L.D.]

4 centers to 89506 please

[Country Boy 4x4]

can you shoot me a price on shipping to 35023 do you have any more patterns ?

[sethro]

4 8 bolt centers for 3.5" backspacing 8 lug shipped to 97470

[MAD MAC]

Pm's sent

[MAD MAC]

ttt

[MAD MAC]

new rim stiffiner added!!!

[mudskipper4x4]

Can I get a price quote for 4 of the h1-8 bolt stiffeners that look like these to 76705? Thank You
http://i436.photobucket.com/albums/qq86/willturner_01/rockwellconversion020.jpg

[01TJCRAWLER]

mac my centers showed up today. thanks



guy's if your looking for flat centers these will be hard to beat .i've had other cut centers and rock rings from other vendors and the cut quality is night and day.

[MAD MAC]

ttt

[scottjkj1]

Quote on 2 to 85704. Thx, James

[creeping death]

quote for 5 8 bolt rings to 49442 please.
thanks!
http://i436.photobucket.com/albums/qq86/willturner_01/rockwellconversion020.jpg

[MAD MAC]

Quote on 2 to 85704. Thx, James

Scott what do you need quoted rings or centers?

Mac

[surfoc18]

PM sent!

[MAD MAC]

PM's Sent

[jperecko]

Price quote for

6x centers 8 on 6.5 bolt pattern
6x rock rings for 12 bolt rims

shipped to 92507

thanks

[natureboynate47]

can i get a price quote on the following shipped to 48371?
4 of these stiffeners 8 bolt
http://i436.photobucket.com/albums/qq86/willturner_01/rockwellconversion020.jpg
and 2 centers 8x6.5
http://i137.photobucket.com/albums/q240/natureboynate47/rockwellconversion032.jpg

thanks
nathan

[MAD MAC]

pm's sent thanks for the orders guys.

We can make just about anything you dream up so just let us know.

Mac

[84zz4ss]

Mac the stiffeners look great.:smokin: Paypal sent. I'll call you tonight.

[big94GMC]

Scott, lemme see the stiffeners you got.

Mac, I'm thinking on 'em....it's a $$ issue now.

[MAD MAC]

Btt

[B&L Truggy]

Do you sell/make 15" 8 lug wheel centers? If so how much are they?

[bluewheelinYJ]

I need 5 of these rock rings shipped to 47122. Price with shipping Thanks.

[MAD MAC]

Thanks for the orders fellas!!!!

[MAD MAC]

We have alot more styles coming out very soon!!!!

[earlybronc]

How much for 4 rock rings and 4 pressed centers with shipping to 72947?

[MAD MAC]

pm's are sent!!!!!

[andywestfall]

Got mine Saturday, these things are nice. The cuts are super clean, THANKS!!

[MAD MAC]

thanks for the orders

[YOTAon40s]

These look sweet! Can I get a quote for a set (4) rock rings shipped to 92335. Thanks.

[mjgal4]

5 centers and rock rings to 44843 thanks

[big94GMC]

Mac, I apologize if I missed somewhere else in the thread, but, can you show me any pics of your rock rings for the 12 bolt rims???? I think you're gonna get more of my money.

[the stinky truck]

hey mac,4 pressed centers 6 on 5.5 to 91765 thanks

[thebigdaddyof2]

I didn't make a reply after getting my rockrings cause I was so busy getting ready for the next Flat Nasty trip.
Thanks to Mac, I was able to make the run.

I can't say it enough fellas- TOP NOTCH CUSTOMER SERVICE!

Mac, thanks again. The 'Big Daddy' rockrings worked out great. I didn't even have time to paint them...

See the short video clip on YouTube under Flat Nasty waterfall.
The rockrings and a fresh set of Pitbull Rocker 44s going up Papa Bear.

[MAD MAC]

I didn't make a reply after getting my rockrings cause I was so busy getting ready for the next Flat Nasty trip.
Thanks to Mac, I was able to make the run.

I can't say it enough fellas- TOP NOTCH CUSTOMER SERVICE!

Mac, thanks again. The 'Big Daddy' rockrings worked out great. I didn't even have time to paint them...

See the short video clip on YouTube under Flat Nasty waterfall.
The rockrings and a fresh set of Pitbull Rocker 44s going up Papa Bear.

Here you go Todd

They look good pressed centers even:grinpimp:

YouTube - Takin the crawler up the waterfall at Flat Nasty Offroad Park (http://www.youtube.com/watch?v=Y99842gzWwI)

[YJ4rocks]

4 pressed centers and rings shipped to 73130 please! Thanks!

[big94GMC]

Mac, I apologize if I missed somewhere else in the thread, but, can you show me any pics of your rock rings for the 12 bolt rims???? I think you're gonna get more of my money.


Mac?

[MAD MAC]

Mac?

Loading pics now

:D

[big94GMC]

Sweet..... :D :D

[Tippy]

Can I get a quote for 5 centers and rings sent to 69301?

[elionet242]

quote on 4 centers for hummer rims with bolt pattern 8in170 ford f350 16.5 shipped to 92173

[MAD MAC]

Sweet..... :D :D

http://i50.photobucket.com/albums/f302/56462/rockwellconversion.jpg

I don't have anymore of the others until monday

[mccustomize]

Price on 4 rock rings to 76541?

[MAD MAC]

pm's have been sent

[caseyfowler2001]

hey i just talked to you i want 4 rock rings for a 12 bolt the like the one on this page thanks check your pay pal

[MAD MAC]

Thanks for the orders !!!

[caseyfowler2001]

just got my rock rings top notch product thanks

[MAD MAC]

Thank you !!!!!

[BIG98XJ]

I need 4 rings to 34110

[MAD MAC]

I need 4 rings to 34110

What style and what wheel 8 or 12 bolt?

[BIG98XJ]

What style and what wheel 8 or 12 bolt?

8 bolt 2nd style

[coker4x4]

how much for two pressed centers and two rock rings for 8 bolt style and two pressed centers and rockrings for 12 bolt style? also shipping to 73644 business address

[crawlinyjeep]

would like price with shipping to 95403 12 bolt centers 8 on 6.5 and rings and seperate may have to do rings and centers seperate

[MAD MAC]

Pm sent

[dallas-cj7]

5 of the second style, 8 on 6.5 to 89406

[MAD MAC]

All Pm's Sent hope everyone had a good Easter!!!!!!!!

[turbodog]

Do you make these rock rings in 12 bolt?? If so I want 5 shipped to 36330...
http://i460.photobucket.com/albums/qq329/hawkchiefk16/rockwellconversion011.jpg
This is what I'm looking for...
http://i460.photobucket.com/albums/qq329/hawkchiefk16/3061863502_e35e44944a.jpg
Thanks, Chris

[MAD MAC]

Do you make these rock rings in 12 bolt?? If so I want 5 shipped to 36330...
http://i460.photobucket.com/albums/qq329/hawkchiefk16/rockwellconversion011.jpg
This is what I'm looking for...
http://i460.photobucket.com/albums/qq329/hawkchiefk16/3061863502_e35e44944a.jpg
Thanks, Chris

Pm Sent

[turbodog]

Money sent.

[turbodog]

Hello? Did you get the paypal/pm. Chris

[MAD MAC]

Chris your all taken care of I believe you should have your stuff by now.

Thanks
Mac

[green4x4]

How much for 8 centers and 8 rock rings shipped to business add. zip 75901

[turbodog]

Got them an hour ago. Work of art! Thanks

[Tippy]

Just got my pressed centers and rock rings today. Totally worth it! They are just beautiful! Thanks.

[Big_Red1tonJeep]

I want 4 12 bolt like turbodog wants to 97089

[MAD MAC]

PM's sent thanks for the orders fellas!!!

[MAD MAC]

New styles coming soon!!!!!

[MAD MAC]

Have these in stock ready to go

[caseyfowler2001]

i sent you a pix of my 12 bolt h1 wheels with your rock rings mounted with 47ltb

[HalfJ-7]

How much fo' 4 "half" rings fo' a 12-bolt to 62521
Thanks

[MAD MAC]

PM sent!!!!

[LYRCH]

Hey mac thanks for the centers they look great can't wait to get them installed.i will be getting ahold of you for some rock rings in the next couple of weeks oh and tell fed ex they suck ha ha

[alfredoyj92]

hey mac i need quoted on 5 pcs center press but can i make 5" backspacing and would i be able to remove the studs w the press center at this backspacing or i have to use flat center if not quoted me 5 pcs flat centers delv buisness 33122 thanks again

[MAD MAC]

PM sent!!!!!

[MAD MAC]

Thanks For the orders!!!!!! I normally don't get the phone on Sunday but today must have been a boring day.

[cruiserhead81]

would you please quote me (4) 3/8" centers with rockwell pattern, with shipping costs to 84050. thank you for your time.

[MAD MAC]

Thanks for the orders we are glad to help!!!!!

[jh206]

Price on 4 centers with unimog pattern shipped to 99206. Could you quote me a price with rock rings and without.Thanks Jason

[kota4bye]

4 of these to 29101, please.

http://i460.photobucket.com/albums/qq329/hawkchiefk16/rockwellconversion011.jpg

[mountainbiker90]

pm sent for info on 12 bolt rings.

[MAD MAC]

pm sent for info on 12 bolt rings.

pm sent thanks!!!!!!

[cruiserhead81]

got my centers today. they look great. thanks again

[morepower71]

Can I get a quote for the following all for 8 bolts Shipped to 98408?

4- pressed centers 8-6.5
4- half rock rings
4- flat centers star 8-6.5
4- sprocket rings
8- orings

thanks jason morepower71@hotmail.com

[mountainbiker90]

payment sent. look forward to getting everything. thanks for the help.

[jh206]

Check your paypal,payment sent...can't wait...

[jh206]

Got em today! These are sweet, Thanks for the cool parts!

[boots4]

http://i460.photobucket.com/albums/qq329/hawkchiefk16/rockwellconversion011.jpg

Please quote for:
4 of these rock rings in th 12 bolt style
4 pressed centers 6x5.5
4 o-rings
to zip 97220, thanks

[MAD MAC]

PM sent!!!

[bjeep]

Do you make the rock rings for a 17" wheel?

[MAD MAC]

yes we do I have in the past

What do you need steel or aluminum?

Mac

[bjeep]

Steel, would be four to 30501

[markrobinson]

Received 4 rings yesterday; great product - clean cut, perfect fit, no lead time.

Thanks guys

[FORDTECHGURU]

Quote on 12 bolt pressed centers for 8x170mm to 96007 (5 pieces)

[REDMANYJ]

can you make a solid rockring (no designs) for the inner side of a 16.5" rim that is 3/8" thick and 1" wide? if so how much for 4 shipped to 30066?

[MAD MAC]

Quote on 12 bolt pressed centers for 8x170mm to 96007 (5 pieces)

can you make a solid rockring (no designs) for the inner side of a 16.5" rim that is 3/8" thick and 1" wide? if so how much for 4 shipped to 30066?

Pm's Sent!!!

[bigiron427]

Quote for 4 blade style 8x6.5 centers to business at 36571

[boots4]

Thought I'd post a final product. These are MadMac's pressed centers and half rings for 12 bolts that I put together. The pressed centers are real easy to set up and the half rings fit just perfect. Great products.

http://inlinethumb52.webshots.com/44723/2549646950041288937S600x600Q85.jpg

[MAD MAC]

Those look pretty Sweet Nice job!!!!

Mac

[jeep_boy02]

5 full rings for 8 bolt shipped to 64850.

Thanks

[MAD MAC]

5 full rings for 8 bolt shipped to 64850.

Thanks

Sorry must have been sleeping :shaking:

PM sent

[MAD MAC]

We can beat most of our competitors on price and quality for sure.:smokin:

[MAD MAC]

several different rings on the new site are avalible.

[aucyrano]

(4) 5X5.5 centers and rings to 35055

[MAD MAC]

pm's sent