can any one tell me the size for a 3/4 or 1 ton Chev tie rod

found it

Post the anwser or delete the thread!:flipoff2:

Reamer is 7 degrees (3.5 per side)
Afco Racing $120 p/n 80770
http://www.afcoracing.com/products/...&ProductID=2631
Optional Reamer Sources:
Stock Car Products $80 p/n R8201
http://www.stockcarproducts.com/
Goodson $50 p/n TR-216-2
http://www.goodson.com/scripts/mshop/
Snap On $37 p/n R121

got mine 48 bucks can snap on

Thanks, good info.

so what is the taper for a chevy drag link end?

Originally posted by spot
Reamer is 7 degrees (3.5 per side)
Afco Racing $120 p/n 80770
http://www.afcoracing.com/products/...&ProductID=2631
Optional Reamer Sources:
Stock Car Products $80 p/n R8201
http://www.stockcarproducts.com/
Goodson $50 p/n TR-216-2
http://www.goodson.com/scripts/mshop/
Snap On $37 p/n R121

got mine 48 bucks can snap on

Actualy it is 1.5" per 12" and that comes out to about 7.125*. That is the crappy part but if you oreder a reamer for it then I bet it will be right.