Anybody got any info on mounting/installing a nissan case to sami case doubler?? Theres an old thread but nobody really has any info or pictures of the setup.

I have a nissan case and keep thinking about doing that as well. My Slamurai is going under the knife again soon getting toy axles, powersteering, and wheelbase extensions with yj springs. With this setup i'm losing my 5.12 gears so i'm hoping it works. I don't want to do R+P's front and rear. Let me know if you do it, I keep you posted but it might be awhile. Way to much snow to plow in the NE. I hate snow!!:mad3:

I thought about it years ago, but the Nissan case has the input about 8 inches above the inline front and rear output. There was no simple/reliable way to get the Samurai outputs close to where they needed to be.

Maybe if you ran the Samurai case in front, clocked it way to the right, moved the passenger seat, then clocked the Nissan case way to the left so the outputs were more or less centered in the frame. The front driveshaft would have some crazy angle, but the back would be great for Toyota axles

any pics of the nissan case?

A picture of a nissa/sami case doubler, my buddy sold it didnt get to look at to much.

http://i291.photobucket.com/albums/ll306/slickrock209/Picture013.jpg

Random pic of nissan case

http://www.sparkywire.com/Nissan_720/Nissan_720_files/image014.jpg

is the rear output directly behind the input?

http://www.rosetech.net/photos/trooper/xfercase1.jpg

yes the rear d-line is inline with the front

depending on the gears, could probably cut off some of the front output to make the whole package smaller.