Almost all dana 44 chromloy axle sets available these are nitro gear and axle shafts. They carry a LIFETIME WARRANTY These are high quality axle shafts. Nice black finish common to other shafts on the market. We have been selling and installing these shafts and their gears since they came out with 05+ taco ring and pinions.

These are not yukon shafts, the manufacturing are of like quality to Alloys and ten factory shafts.

I know alot of people are looking for quality chromoly 44 shafts right now, we don't sell junk. The shafts we sell are quality no matter what name is stamped on it.

No Need to PM for Pricing our fair prices are listed below, These may not be the cheapest shafts on the market but the support and quality are second to none, If you need or want to order call or PM for availabilty but as said all 44 shafts are avialble as of today.

We also have Alloy USA D44 f-250 shafts available.


Nitro Dana 44 axle Kit w/ alloy x-joints or spicers- $580 Shipped or w/ yukon super joints for $900 Shipped

do you have chromoly rear axle shafts for a D44 off a '78 IH Scout? if yes, how much for a set shipped to Miami FL 33166 business...

Thanks for the orders today, plenty more shafts available

For the afternoon crowd looking for quality 44 shafts

We also have Alloy USA D44 f-250 shafts available.




How much for a set of inner axles shipped to 92173?

can you sell just the outers? I need a pair of chevy/jeep 9.94" ers

PM sent yes we can sell just outers or individual shafts

Front shafts how much and avaliability.

Price for a Chevy D44 long inner shaft shipped to 28540 please.

thanks for the orders

bump late waggy 80-90, and ford shafts ready to ship

Late waggy shafts are ready to ship, and ford shafts

D44 shafts for a 95 passport rear? Shipped to 30721....

Got any rear rubicon 44 shafts? 98055

waggy D44 '76 full cromo up grade set shipped to 84770.

Can Chevy (9.97) outters be substituted for Ford outters? Also, do you sell without U-joints? If so price please...

yes can be sold with out Joints for $520 shipped, and yes stubs can be substituted. Chase

axels for xj D44 rear housing W/35 spline and dual bolt pattern 5 on 4.5 & 5.5 shipped to 97267

Do you have the rear 76' Scout 44 shafts?

if so, a set shipped to 63084 (Missouri)

passenger side inner and outer for 77 Ford F-150 HP Dana44 without u-joint shipped to 18706

Do you sell custom lenghts/sizes for a front Dana 44?

Late waggy 80-92 shafts full sets ready to go,

F250 shafts ready to go w/ 9.72 stubs

71-77 bronco shafts are a go

Scout stub shafts 8.72 available

alot more shafts coming in this week, dana 44 shafts are ready to ship

Please provide me with the price of a dana 44 stub shaft. I only broke one, It's Moser I won't buy from them anymore. They dont' stand behind their product. It's about 7 3/4" long from the inside edge of the u-joint yoke to the end of the splines. It has 19 spline outers. Please email back at jmcm4@verizon.net

thanks,

jake

email sent sounds like you got scout stubs and we have them.

great customer service. chase is the man!!! buy with confindence

PRICE FOR 79 CHEVY DANA 44 , to columbus ohio 43204

thanks for the orders guys again full kits w/ alloy x-joints are $580 shipped.

PM coming

:usa:

need a quote on a set of inner axles for a 79 f150 high pinion, the factory length short side and a 5" shorter long side shafts with shipping to 98208. thanks.

can i get a qoute on a chevy d44 stub sent to 85338

97 TJ rear dana 44 axles?

how about for an xj rear with a 6 on 5.5 lug pattern shipped to 95126

i was wondering if you had them for the dana 44 ttb off the 80s-90s f150s.

Hp d44 front 30 spline out of a 78 f250 shipped to 22309? are they available? Any and all info would be appreciated. thanks..

Axles front for a D44 30 spline and rear D44 35 spline, both are rubicon housings. Shipped to 33306

Thanks

PM's sent

78/79 F-150 HP44 Stock Inners/Outters and Joints to 40701

qoute on just outers for a 78 ford D44 with shipping to 91791?

Lots more stock coming in

Early and late waggy axles
Scout axles
Chevy, Ford
well basically all of them.

Ready to ship.

Got some more 44 stock in today all are ready to ship

dare i say all applications of 44 chromoly shafts ready to ship.

Hello, Looking for D44 axles 33 7/8 long side, 18 1/2 short, standard outers shipped to 83401

Cannon your buddy called and he is hooked up thanks, Chase

thanks for getting him set. hes been looking for a while!

If yukon won't warranty my shit I will give you a call!

they do not have anything to warranty it with, I have some misc. yukons left and some misc of their hardcore line. Give me a shout I can help you out on those as well.

Late model Waggy 44 front shafts and XJ 44 Rear shafts.

Thanks!

Looking for a pair of rear shafts for a 89 Grand Wagoneer shipped to 19153.

Thanks John

I need a price and availability for Ford longside F-150 to 50249 .

thanks ,


howiebilt

howie got what you need

More sold today plenty more to go

In stock ready to ship

Scout, waggy, ford, chevy all available

Only thing 44 not available is the fairly rare 10.66 f250 stub shafts, plenty of 9.72's

I need a price on a set for a 94 ram 1500 sent to zip 08330

all 44 shafts available

what about a 79 2500 gm d44 front 8 lug

yep got those call to order

Price for 77 ford f-150 front without joints and If you have them ford f-100 2wd dana 44 rear 77 1/2-79 years...

themud

front without Joints $510

rear in 1541h $125 a piece

how about total price shipped 92376? one EB outer only, 19 spline, 9.72, that accepts 297X/760X joints. thanks Mickey

PM sent got those. nearly every 44 shaft is availbale. haven't been stumped yet

D44 rear both sides 30 spline TJ shipped to 49512

Thanks

77 ford f-250 long side inner and outer , i just need a price for now shiped 95470?

PM's sent lot shafts available including the rear 44 shafts

80-82 waggy 44 (inner/outer/alloy joints)
and
87-89 XJ 44 rear 30 spline w/ dual bolt pattern or only 5x5.5 if available...

to 89502

Thanks
Bryan

I PMed you before and tried email. I haven't got a response on the stub shafts i need. They are really close to 10" from center of axle u-joint to the end of the stub shaft. It maybe be a 1/16" or so shorter then 10". The axle came out of a late 70's waggonner. 19 spline Dana 44 stub shaft. I only need one. My email is jmcm4@verizon.net or call at 775-230-8177
It will be shipped to Gardnerville Nevada 89460. Do you also sell Dana Spicer HD u-joints. They have 1-3/16" caps I guess they are pretty standard size U-joints for the older Dana 44 shafts. Mine are pretty dry and need to be replaced.
thanks,
Jake

Please provide me with the price of a dana 44 stub shaft. I only broke one, It's Moser I won't buy from them anymore. They dont' stand behind their product. It's about 7 3/4" long from the inside edge of the u-joint yoke to the end of the splines. It has 19 spline outers. Please email back at jmcm4@verizon.net

thanks,

jake

sent you an email, adn sent PM on the other one. feel fre to call for faster service. All items are in stock

44 shafts In stock ready to ship

Im not sure what I want for u joints, but how much for a set shipped to 48081 for a front 78 f250 housing and 79 bronco outters? I also need a set for the rear 9 inch, from a 79 bronco.

how about inners for a '78 low pinion F-150 with 9.94" GM/Dodge outers shipped to 30096? thanks so much!

PM's sent

31 and 35spline 9" shafts 76' f-150 please

Pm returned

Dana 44 shafts ready to ship chromoly Lifetime warranty.

Now when you say Lifetime does that mean only if you run "this u-joint or that tire size" or is it "you break it we replace it?" I guess what I want to know is if there is any fine print. Also if a shaft happens to break, how do you go about getting a replacement? Thanks!!:smokin:

we will take care of the warranty for you. No questions asked on shaft failure, on the first one. After that if your running a shotty ujoint and they keep taking out ears then we humbly request you to upgrade ujoints. then no matter what the shaft is warrantied.

Price and availibilty on stubs fro an 88 waggy 44 shipped to 93908 thanks Ryan

In stock PM Sent

price and availability for 78 f-150 D44 full set with yukons shipped to 78750?

and how about 31 and 35 spline 9" shafts for an 85 F150 while we're at it.

WOW, Great customer service and quick shipping. I ordered some stubs on tuesday (mid day) and got them today ( thursday) on the left coast. I'm really impressed. You got my business. THANX RD:smokin:

thanks for the order 44 shafts in stock and ready to ship

Would it be possible to mix and match outers and inners? If so could I get a price for scout inners and chevy outers with x-joints to 18054? Thanks.

Hey there, I'm looking for rear axle shafts for a 44 out of a late 70's scout. Price? Wondering if you ship to Ontario, Canada.

In Stock Ready to ship.

Plenty Of scout stubs, Chevy stubs and ford stubs. All inners available.

Also have backorder dana 44 Superjoints

$580 shipped $900 shipped w/ Super Joints

35 Spline Waggy Chromoly shafts, drilled 5 on 5.5 (REAR)
35 Spline D44 ARB
D44 Gear Install Kit


IN NC
THanks, NIc-

89 Grand Waggy D44 need new chromo axles

2 outer axle shafts both sides are 9.94"
2 inner axle shafts driver-side 15.8" and passenger-side 32.12"

Shipped to 63139

No joints $500 shipped In stock

waggy drivers drop inners to 98034? thanks in advance:D

almost every 44 shaft in stock.

I'm looking for a set for a '77 ford dana 44 front 1/2 ton. 30 spline inners and 19 spline outers with x-joints. Shipped to 43547.

1. This was already asked but I didn't see an answer: Can you make a shaft kit for a '76 GM Dana 44 front in a custom length?

2. I also need shafts for a '76 Ford Bronco 9 inch rear 31 spline with 6x5.5" bolt pattern.

Thanks!

I'm looking for shafts for dodge d44, does nitro have an application that will fit? Axle is a d44 from an 82 dodge truck with outers from an 85.

Could you do a set of chevy with out joints

Yes we have a very large selection of shafts both 60 and 44. Chevys are no problem. Chevy 10 bolts also.

D44 Scout II front shafts both sides, 80631.

PM sent lots of shafts in stock, I am out of chevy longside should have more in the next week, have evry other application ready to ship from our east coast location.

Quote on Nitro 78 F250 D44 inner shafts and 78 Bronco D44 stubs with Alloy USA X Joints

Thanks.

Shot you a PM nearly every 60 and 44 shaft option availble and in stock ready to ship from the east coast. Also have dana 44 and dana 60 blanks available for custom length axles.

Lots of shafts ready to ride the brown truck

how much 1980 and later waggy 44 shafts with spicer joints to 98312

Lots of shafts ready to ride the brown truck

Damn Chase, that's sounds a little dirty!

well sell them dirty or clean anyway you like them.

Set of inners and outers for a 79 F250 with a Dana 44 shiiped to 08527? Thanks

Are these coming with the X-joints with or without needle bearings?

X-joints have needle bearings but have forged cross's no zerk fitting to weaken it in the cross, but they do have grease fittings in the caps so you can keep them lubricated. only non needle bearings joint are superjoints, ctm's and bobby's, for now.

i have a ZJ with D44 TJ rubicon axles.. How much for the complete front set with and without u-joints and how much just for the outer Driver side.

thanks

jay4554 @ aol . com

are these prices still good?