|
: D60 top of knuckle kingpin cover robellis77 09-10-2001, 10:53 AM I've got a 79 Ford D60 with the steering arm on top of the drivers knuckle. I cut the arm off but still cant get my histeering arms to work. Anyone know where I can get just one of those caps. This is the 4 bolt cap that holds the spring on top of the kingpin Thanks TPIJeep 09-10-2001, 01:32 PM If you need one I have one, just pay shipping. It is a Chevy unit but I am sure they are the same.. robellis77 09-10-2001, 01:49 PM I sent ya email, thanks Ant 09-10-2001, 02:57 PM I have some of those caps also. Let me know if you need one. <IMG SRC="smilies/massey.gif" border="0"> PTO DAVE 09-10-2001, 07:44 PM I could sure use a 79 60 Ford steering arm. If anyone has one of this I could sure use it. Thanks Dave <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0"> Ant 09-11-2001, 09:08 AM A factory Arm?? If so I have a Factory Chevy one. PTO DAVE 09-11-2001, 10:46 AM I need the ford factory arm. I think its different than the chevy one. Thanks. Scoutaholic 09-11-2001, 05:41 PM You can buy the cap from NAPA but they will most likely have to order it in. robellis77 09-11-2001, 07:10 PM Damn, PTODave I butchered mine trying to make it work. I would have given it to ya. I think TPIJeep has me hooked up but thanks everyone <IMG SRC="smilies/biggrin.gif" border="0"> ashmanjeepXJ 03-12-2003, 12:23 PM Originally posted by PTO DAVE I need the ford factory arm. I think its different than the chevy one. Thanks. I have one... Do you still need one? cmk 03-12-2003, 12:38 PM Originally posted by ashmanjeepXJ I have one... Do you still need one? Dude, the last post in this thread before yours is literally a year and a half old. :rolleyes: cmk ashmanjeepXJ 03-12-2003, 01:23 PM Originally posted by cmk Dude, the last post in this thread before yours is literally a year and a half old. :rolleyes: cmk WOW! So, I dont spend much time on "PAGE ONE" of the General 4x4.:flipoff2: GirlfriendYJ 03-12-2003, 02:32 PM funny that this is so old casue i actually need a cap like that... i have the factory ford arm i will trade someone...or if anyone needs it they can have it...anyone have a cap for me?! saf-t scissors 03-12-2003, 02:41 PM Originally posted by GirlfriendYJ i have the factory ford arm i will trade someone...or if anyone needs it they can have it...anyone have a cap for me?! Your local NAPA has one.... or can get it in 2 days. ashmanjeepXJ 03-12-2003, 02:54 PM Originally posted by GirlfriendYJ funny that this is so old casue i actually need a cap like that... i have the factory ford arm i will trade someone...or if anyone needs it they can have it...anyone have a cap for me?! Thats how I bumped into the post Via a search. I needed caps for some steerign arms that dont have caps and require the GM Caps. I just called today $9.83 GM part no. 0047-1750 Upper kingpin cover (http://www.differentials.com) 1-800-510-0950 chris EXT.110 I havent priced around so dont know if that cheep or not, but it will work for what I need! Ill trade my factory arm for a GM sheet metal cap!:D GirlfriendYJ 03-12-2003, 08:10 PM i know i can go buy the cap...but from the looks of this post people had extras just sitting around...anyone got one?! broncorob 03-13-2003, 06:21 AM Yeah, I was like WTF when I saw my old screen name up there from over a year ago. Notice when you are searching, the old threads have the date on them. | |