In the ever long project, here is an update. The motor/trans is positioned and the mounts are all made. They are only clamped into position right now. I am going to tack them in tomorrow. Then I am going to finish installing the rear D60. Hopefully I can also get the front close to being in there. I start work on monday so things are going to slow way down now.


http://www.sweetcj7.com/Mtr_cross_mnt.jpg
http://www.sweetcj7.com/Mtr_mount.jpg
http://www.sweetcj7.com/TPI_n_Jeep.jpg
http://www.sweetcj7.com/TPI_n_jp2.jpg
http://www.sweetcj7.com/Trans_mnt.jpg

very nice what size bushings and tubbing is that looks killer

1.5x.120 wall tubing and wrangler small eye busings with a 9/16 sleeve. cut the tubing to make the final width is almost 3".

I can measure it if you want.

I measured it and you need to cut it 2.5" exactly. Then deburr and sand the edges.

thanks man

By golly, that's starting to look pretty darn good. You do nice work... <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

very nice alan! i think thats the way i'll build my mounts for the cj-7. <IMG SRC="smilies/jeep2.gif" border="0">