fairlane_68
02-21-2009, 11:22 AM
I would like to get rid of this stuff. Too much to list, and it would take forever to take pictures of individual parts. Anything that came factory stock on a '97 Mustang LX, I have it. Some parts have the F4 prefix part numbers, so those parts will work on a '94-up Mustang. Gray cloth interior, power windows and driver seats, power locks, remote keyless entry, PATS, both airbags still intact, dash panel may have one or two near invisible cracks, seat belts and seats. I have all the nuts and bolts that held eveything in, and all the trim panels, including the carpet, which is in decent shape with no mystery odor. Door glass and window motors are still on the car, but not for much longer. Drivers window motor freezes when the outside ambient temp gets warm. The main interior harness did get cut at the driver's door, because the connector would fit through the hole. No EFI harness. This was a 3.8L V-6 car with a manual transmission, with a carb'd 302 grafted in. The car has been stripped and being built for use in SCCA club racing.
Cost is free for anything, buyer pays for and arranges shipping. I'll prep for shipment as much as possible.
Cost is free for anything, buyer pays for and arranges shipping. I'll prep for shipment as much as possible.