I know where a unmolested one is in a wrecking yard with disk brakes. I am wondering if it is one I want. what is the spline count, width, and bearing size?
Thanks


And yes I did a search! <IMG SRC="smilies/thefinger.gif" border="0">

probably big bearing. 28 spline <IMG SRC="smilies/frown.gif" border="0">

any idea on how wide the housing is? I'm not worried about the spline count as much as ability to bolt it in easily. I have a waggy 44 that is about 62" and would like it to be close.
joe

what model Lincoln and what year?

continental unsure of year.

year makes all the difference. If leaf sprung, i think it will be close to 58"? wide. coil sprung are wider.

what are you going to do about the 4lug pattern?

Cut the ends off and stick em on a 60 with moser shafts.. Dats what I did, wallah - 6 lug 35 spline..


http://www.rivercityrockcrawlers.com/TechReports/MoPower/axles/weldingmyrearaxle3.jpg

(no I was not welding the ends on there, those are the perches..)

[ 10-05-2001: Message edited by: Brandon ]

Hey B,
Is the full size lincoln a four lug? If so where did you get the rotors from a wagoneer front?

I have never seen a lincoln with 4 lug wheels. It should have 5 X 4 1/4.

either way not 6..

I redrilled the rear for 6 with moser shafts to match the 6 lug front