|
Mr McGee 08-26-2002, 04:59 PM check it out!! i am especially proud of the air tank crossmember. :D http://imagem.webphotos.iwon.com/1000035354/1000035354_826200225614PM0.8467175 _Max DCruiser138 08-26-2002, 05:09 PM whoa...super clean!!! BJ On Roids 08-26-2002, 05:18 PM looks good...where is your air tank? Mr McGee 08-26-2002, 05:49 PM it is the main crossmember (ie before the "bed" and after the driver and passenger floor pan...i will post a pic. the pic is from the back side (oh and in the pic the tub is still on its side.) http://imagem.webphotos.iwon.com/1000035354/1000035354_826200225501PM0.6929067 and you can see it to the right side on this pic....pretty cool how i incorporated the stock dropout! :D http://imagem.webphotos.iwon.com/1000035354/1000035354_826200225419PM0.3152429 Mr McGee 08-27-2002, 10:58 AM ttt hey, i have an ego dont i??? :D:flipoff2: FIXXXXAH 08-27-2002, 01:05 PM SO, IS THAT CROSSMEMBER SEALED UP AND IT IS GOING TO BE PRESSURIZED TO SERVE AS AN AIRTANK? OR DOES IT JUST HAVE TABS WELDED TO IT FOR A TANK? :confused: Mr McGee 08-27-2002, 02:03 PM notice the three fittings in the last picture...those are for the connections. yes, it is sealed (hopefully) and will be pressurized to nintey pounds. the tabs are for mounting the tub to the frame. -Max FIXXXXAH 08-27-2002, 03:05 PM RIGHT ON, DID YOU CONSIDER THE CAPACITY OF YOUR CROSSMEMEBER? AT 90 PSI ITS GOING TO RUN DOWN PRETTY QUICK... TUB'S LOOKING GOOD THOUGH, DID YOU HERCULINER IT OR IS THE BLACK PAINT? PEACE, MATT Mr McGee 08-27-2002, 09:51 PM Originally posted by FIXXXXAH RIGHT ON, DID YOU CONSIDER THE CAPACITY OF YOUR CROSSMEMEBER? AT 90 PSI ITS GOING TO RUN DOWN PRETTY QUICK... TUB'S LOOKING GOOD THOUGH, DID YOU HERCULINER IT OR IS THE BLACK PAINT? PEACE, MATT hehe we wont even have onboard air, just a chuck to fill it up with at home because the tank is for the AIR HORN baby!!! hehe so i should be fine. actually it is rubberized undercoating made by the bondo company, and it is getting moderately hard. oh and we went in this order: [list=1] XO Rust Primer (didnt come off my legs/arms for 10 days) XO Rust black Enamel And finally the rubberized underspray [/list=1] if you ever spray a vertical surface with this stuff, you need to hold it like 3 feet from the steel otherwise it will run! bad!! | |