Centerfire has some used barrels for sale from a yugo m70 and m72. Any idea what size trunnion these barrels are for? I had a friend who was placing an order and had him add a m70 barrel for me on the off chance it might work for my AMD 65 kit.

Any ideas?


Links:
http://www.centerfiresystems.com/AK-P46.aspx

http://www.centerfiresystems.com/BBL-RPK.aspx

They are usually TORE UP condition, but you might get lucky.

walk, wait run away,

walk, wait run away,

well, I said USUALLY. I have a M70AB2 with a mint bbl too. Happens sometimes.

At those prices, it's best to order 2 or 3 and then go with the best one, then the others can be turned into yard art or something. Unless it's a virgin barrel, it'll most likely be rode hard and put up wet.

At those prices, it's best to order 2 or 3 and then go with the best one, then the others can be turned into yard art or something. Unless it's a virgin barrel, it'll most likely be rode hard and put up wet.

Agreed. You will likely get one or two with some heavy galling behind the barrel pin notch, and the bore shot to shit. Just right for chucking in the lathe and making a pistol barrel. Even if you turn one down too far, who cares - cut another one :D.

Don't know why it took so long to arrive but the barrel just got here. Out side is a little beat up but the bore is pretty good. Only slightly pitted. Think I am going to order another one for my pistol and keep this one for another project.

colorado gun sales has new m70 barrels.