|
Sundowner 08-27-2002, 04:18 AM I've found a BEAT m715 with a braden PTO powered winch in the front. what's the deal with these?where's the PTO? on the tranny or the T-case? from grossly poor memory, the 715 has a t98 tranny? I wanna rape this thing for the winch and the pto for my 78 Cherokee with a t18a. but will everything fit? Jakesteramalamajama 08-27-2002, 04:59 AM Anything will fit with a sawzall and a big enough hammer. :D However, are you sure you want to have a winch that'll only work when the engine is running? Better stay outta the deep stuff. Jake Sundowner 08-27-2002, 05:12 AM I'mm willing to watch while you figure out how to use a sawzall to bolt a pto to your Jeep (not mine) :flipoff2: I realize the problems with an engine driven winch, still, if I can get it for cheap, you'd buy it, too, wouldn't you? ;) Jakesteramalamajama 08-27-2002, 05:40 AM Originally posted by Sundowner I'mm willing to watch while you figure out how to use a sawzall to bolt a pto to your Jeep (not mine) :flipoff2: I was thinking channel for the PTO shaft up to the front of the vehicle... But seriously, I've went wheeling with a guy who had a PTO winch. Lotsa power, pain in the ass to use. payton 08-27-2002, 06:01 AM Originally posted by Sundowner I'mm willing to watch while you figure out how to use a sawzall to bolt a pto to your Jeep (not mine) :flipoff2: ;) umm u forget to add duct tape... cant duct it fawk it.. :flipoff2: Oxjockey 08-27-2002, 06:27 AM Start here: http://www.ptospecialties.com/index.htm And look at their PTO section. You'll need to know if the T18 has straight or helical cut teeth, etc. Bryan Grendel 08-27-2002, 09:06 AM It's the tranny that drives the PTO. I have one on my M-715. The transfer case is divorced. Not sure you want to put that winch on a lighter vehicle... If you buy it, I could use the T-98. | |