Can anyone tell me if this steering valve will work for my jeep? From the research I have found I don't think the steering will return to center but it only going to be use off road. It has a port on the side but I figured I could just block it off. Also does anyone know how or where to get the exact specs on this particular pump? Anymore info would be helpful Thanks Tim

found some info on it on dannfoss web site

http://www.sauer-danfoss.com/stellent/groups/publications/documents/product_literature/520l0468.pdf#page=25


look about 1/2 way down. now we need somone to dictate the info:flipoff2: your ID numbers are OSPF 125 LS

jason.

Thanks for that info. I have already been there but wanted to know some definite specs on the valve and will it work for what I want. Thanks again Tim

Looks like the fith port is LS in the schematics I've looked at. The LS (load sense) would activat a hydrulic pump or switch to start ot divert flow to the steering system. I would give it a try and plug off the fith port. If it doesn't work pass it on and find another. You won't be out anything. All the plumbing could be used on another valve. You might get more results posting this question in Geneal 4x4. There is a larger crowd to draw from. Mark

Thanks NWFLYJ. Whats up, cant sign off as DAD anymore?:shaking: I see how it is. Thanks again, I'll talk to ya soon. Tim:D