|
Harvester of Sorrow 08-27-2002, 03:48 PM trying to have the machine shop mill my tie-rod for my front end... 3/4-16 UNF TRE's... Tap drill for above size is 11/16... What tubing has everyone used? Scout Dude 08-27-2002, 03:51 PM Is there DOM available around 1.25" with a .28 or .29 wall? I used 1.25 x .219 for my tr & dl..but I have 7/8-18 tre's Ben W 08-27-2002, 03:53 PM I use 1.25" solid. Its cheap, readily available, and you don't have to worry about the I.D. for tap drill size, you just drill it to whatever you need. :) JoshC 08-27-2002, 03:58 PM 1.25" with 7/8 TRE's Pic here... (http://www.pirate4x4.com/forum/showthread.php?s=&threadid=63706&pagenumber=2) Harvester of Sorrow 08-27-2002, 04:11 PM Originally posted by Ben W I use 1.25" solid. Its cheap, readily available, and you don't have to worry about the I.D. for tap drill size, you just drill it to whatever you need. :) Well... Our purchasing agent in the machine shop just dropped my jaw on the pricing for the SS tubing... So I am going with some 1.250 solid! A tie rod is better than no tie rod right? Jesse Angel 08-29-2002, 05:54 AM I used 1.00" x .156 wall D.O.M. tubing fromwww.artmorrison.com (http://www.artmorrison.com) it's $5.00 per foot. Let me know cause I'm headed up that direction and could pick you up a chunk. Harvester of Sorrow 08-29-2002, 07:46 AM you are headed up to my neck of the woods? What for? Yeah...I will let you know the length that I need. | |