Did a search and found nothing for a 1" heim. Did a search on the net and most places skip between 3/4" and 1 1/4". Due to the configuration I am unable to make a 3/4 or 1 1/4" work without substantially reworking of the set up.

Anyonw know of an Internet source with a spec graphic about it. I can make a male or female spherical rod end work so that doesn't bother me, but it has to be fine thread. Thanks. Really looking for the specs on it, before I blindly order one and find out it won't work.

Way

do they?
http://www.avalancheengineering.com/

Thanks, but No. They skip between 3/4 to 1 1/4" just like most of the 4x4 companies that have them on their site.

I most likely need a dealer of heim joints that is not specialized...meaning that they have an assortment of heims. 1" heim joints typically have 12 threads per inch according to one source I found on the net. Most places say to call, but I hate to call and ask for ten specs and then say I'll call you back in a day if that works. Also specs on different brands differ, so it would be nice to see info on the web.

Way

M.O.R.E sez,

"If you need Rod Ends, or Tube Ends in a size that is not listed above, call us! We can special order different sizes."


www.mountainoffroad.com

might be worth a try...

Paul

Nope...

http://www.qa-1.com/
http://www.radialbearing.thomasregister.com/olc/radialbearing/home.htm