|
squintv 03-16-2009, 11:08 PM If my ranger's hubs lock and turning the front driveshaft does noot make the front wheels turn, what are the possible problems? Broken Spiders, Broken R&P Anything Else? When its jacked up, turning a wheel has NO effect on the other or the shaft. And yes, hubs are locked. What gives? BigDusty 03-17-2009, 12:09 AM broken shaft? If you have an open diff its a possibility Time to go to 1 tons :D mikepotts 03-17-2009, 02:27 AM you say turning the d-shaft doesnt turn the wheels...does it turn the axle shafts??? if so it could be as simple as a broken hub, i would suspect a hub before anything else! Midget28 03-17-2009, 06:16 PM If the axle spins when turning the driveshaft its a hub If each axle spins when turning a wheel spider gears if one spins and one doesnt axle.... flight2k5 03-17-2009, 06:19 PM Are the back wheels off the ground? If the tranny is in gear and you left the back wheels on the ground you wont be able to to turn it. grasshopper77 03-17-2009, 06:51 PM what year is the ranger? | |