Selling something located in the Midwest? Save some of us time looking through the classifieds by posting a link to your sale add here:smokin:

i got a set of 36x12.5-15 tsls that are grooved had 3/4 tread before grooved on 6 bolt chevy rims would like to get 600 for them

2 36x12.5-15 half tread 100 a piece

chevy shortbox roll bar id like to get rid of just make offer i have pics just shoot me an email i can send pics

what brand are the non-grooved half treads?

Do you ever get anywhere near OH?

I have for sale.

th350 trans
rev man vb
redline clutches
kolin steel
a.a. dana 300 kit
dana 300 stock
asking $1200 tranns is new

i'm in bradley,il 60915

My 99 F250 2WD Super Cab
Posted in the sales area......

Links people :smokin:

4 36x13.50x15 Bias Iroks $100 takes all four.
http://www.mijc.org/phpBB3/viewtopic.php?f=9&t=1950

Tires are sold.

My 05 Unlimited rubicon for sale on here

Links people :smokin:

x2

Build yourself a 60 hybrid http://pirate4x4.com/forum/showthread.php?t=771922

turbo 400 / 203 http://pirate4x4.com/forum/showthread.php?t=754825

I also have a set of 35x12.50-17 competition compound groved MTR's on black steel wheels 5x5.5 Looking to get 300 for them

I also have a couple of pairs of Scout II dana 44's 3.54 gears 200 for a pair of F&R

An Eaton HO 72 with 4.56 and detroit $ 350

Ford HP 44 F250 leaf spring 8 lug 3.54 $350

Pick up in NW Indiana

here is the link for my stuff
http://eauclaire.craigslist.org/pts/1057642187.html.

dana 60 front locker http://pirate4x4.com/forum/showthread.php?t=770582

Double ended ram
http://pirate4x4.com/forum/showthread.php?t=772114&highlight=

TJ REAR SEAT
http://pirate4x4.com/forum/showthread.php?t=751007&highlight=

TJ TUBE FENDERS
http://pirate4x4.com/forum/showthread.php?t=757308&highlight=

New 38" Swamper
http://pirate4x4.com/forum/showthread.php?t=751011&highlight=

36" Iroks (>10 miles)
http://pirate4x4.com/forum/showthread.php?t=754922&highlight=

5 - DIY Beadlocks (not finished)
http://pirate4x4.com/forum/showthread.php?t=766063&highlight=

I have for sale.

1985 chevy long bed 1/2 ton 4x4 truck
very little rust (truck from tn.) barn find
400 sdc
th350 needs replaced cracked housing
4in lift
80's style roll bar with lights
has small dent in driver front finder and rear quarter. look like they
got up against a small tree.
solid cab corners
bed floor rust free almost scrach free.
asking a $1000 for her can be restored easy.

also have th350 trans
rev man vb
redline clutches
kolin steel
a.a. dana 300 kit
dana 300 stock
asking $1200 tranns is new

location?

Got a AMC 360, Ben sitting for a while, First $150 Takes it.
Located in Hampshire, IL

location?

bradley,il 60915 sorry

Selling all my 1-ton fullsize stuff to build my Toyota.

Fully rebuilt divorced style NP435 and NP205 combo, 0 miles since rebuild, heated garage kept.

$500

http://rockford.craigslist.org/pts/1089128848.html

Dana 70 rear, SRW, 3.73 open geared - $200
Dana 70 rear, DRW 4.10 open - $100
14-bolt rear, DRW - 4.10 - $100
77 Highboy chassis, setup for truck pulling - $200
5 on 4.5'' 15x10 steel spokes - $100

Pics available upon request.

Located Dixon, IL

95 Grand cherokee: 4.0, auto, 4x4 3:55 gears, new radiator, 75% worn 31 inch tires. 190K.
Wife was driving from NY to CA made it to kansas city blew a head gasket or water pump cracked and killed it. Dont know what went first or the condition of engine internals. Its at Harvey Automotive 7525 Leavenworth RD Kansas City KS. Im located in southern CA so give me a call and make an offer (315)767-7648

Thanks
Jesse

parting out my truck:
http://www.pirate4x4.com/forum/showthread.php?t=774705

8 lug 17x9 steel wheels $150 obo for the set (4)

8 lug 2" Al 6061 wheel spacers $75 obo for the pair (2)

http://www.pirate4x4.com/forum/showthread.php?p=9625853#post9625853

For a cj, They are new. $100+ the Ride.

Is the Commando in your thread for sale?

Anyone know of a decent CJ7 tub for sale? Hopefully within 300 miles of Decatur Illinois???

Is the Commando in your thread for sale?

no i sold it to my uncle... thanks for asking tho

motor is ready to be picked up!!!
http://www.pirate4x4.com/forum/showthread.php?t=774705

EDIT: PRICE REDUCED!!! OR BEST OFFER

T-case is ready:smokin:
http://www.pirate4x4.com/forum/showthread.php?p=9651923#post9651923

http://www.pirate4x4.com/forum/showthread.php?t=776877
07 kawasaki prairie 360

- D60 rear (centered) from J20 (stripped of brakes and gears ready to build) - $75 OBO

- AW4 - Out of 90' XJ with 160k $100 OBO

- D35C and non c-clip axle shafts $25 a piece OBO

- D30 from YJ - $30 OBO

- 15x8 8 lug rims brand new, black D window steelies (2) - $75 OBO

- YJ gas tank - $40 OBO

- Rear half of a YJ frame (in great shape.....minus being cut off) - Come and get it

All of this in Fisher, IN

My buddy is selling some stuff on craigslist:

Chevy SM465 and 205 (http://southbend.craigslist.org/pts/1110462168.html)

Ford 60 Rear and 205 T case that is fully rebuilt (http://southbend.craigslist.org/pts/1110401485.html)

2006 Silverado LT $16,000 (http://southbend.craigslist.org/cto/1110510913.html)

I have my 2001 YZ250f dirt bike up for sale. Gotta buy some coilovers.
http://southbend.craigslist.org/mcy/1076648367.html

http://pirate4x4.com/forum/showthread.php?t=777463

I'm also looking for a set of Moab's...Prefer rims and tires...

99 cherokee 4.0 auto sye, kit 8" long arm rockkrawler lift new fox 2.o shocks. Exo-cage. The body is rough current pic below, its missing the windshield and rear side window. The axles are stock rear is welded and the front has a true trac. Has on board air. Aluminium Fuel cell, 90% tread swampers.

$4200 OBO

Thanks
MPF

http://www.pirate4x4.com/forum/showthread.php?t=779366


Looking for trades, let me know what you got.

wish i had the cash, I LOVE THESE!

Wish you did too! I love trading to, if you got something to trade.

i dont have any thing of value, except my jeep:( but im only 18 so i guess being an unemployed student isnt so bad...

i guess you could have my 5.2 for your swap... but its not worth anything more than 500 or so...

we've got some axles tires/wheels and some loose wheels for sale, check out the classifieds under axles/tires and wheels posted 4-19 everything is located in NW indiana contact # is listed there

'88 HP 60 front - spare 60 parts
http://www.pirate4x4.com/forum/showthread.php?t=780430&highlight=

Unimog U1000 steer axle
http://www.pirate4x4.com/forum/showthread.php?t=780428&highlight=

I also have some Vortec 454 injection systems, harnesses and computers for sale, as well as a fully rebuilt 4L80E with all new internals and a Vortec 454 that needs a new home.

I drive through Indiana and Illinois on business about every two to four weeks and can meet up or drop off if it's close by.

I'm up in Holland Michigan

disc brake rear 60 http://pirate4x4.com/forum/showthread.php?t=780997

I have 4 Super Swamper Trxs ATS 38x15.5/15 for $100.00 (all 4)
Local pick up in B/N area or galesburg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230001.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230006.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230004.jpg

www.pirate4x4.com/forum/showthread.php?t=783294

Looking for someone local to swap single wheel hubs for dual wheel hubs willing to meet half way. Located in Ottawa, IL. Let me know what you got. Thanks in advance

http://tippecanoe.craigslist.org/mcy/1141341376.html

http://tippecanoe.craigslist.org/mcy/1141341376.html

how much and where?

Lafayette and ill take 2500
It has ZERO time on a dealer rebuilt motor. lost the lower crank bearing

8" rear lift springs for a 73-87 GM. 56" length. Just the rears. Asking $200?:confused: or best offer. Located in Jefferson, 53549.
Also a pair of front springs for 73-87 GM 4" lift asking $150??? obo.

Any WI or MN folks have a set of 4:11 for a Ford D44 front HP reverse rotation???

Or if anyone wants to ship??

come on midwest guys.........need some IROKS????


4- 36 x 13.5 x 16.5 IROKS 97%-99% tread


I used them for 7 miles while i was building my jeep. Just running it up and down the road while dialing everything in.

Than i went to 42's and pulled them off of the jeep. My brother in law borrowed them for EJS 09' their they saw about 30 miles of driving and 3 trail runs.

Now they are dismounted and back in my garage.

$800/offer for just tires

Trades considered towards a nice set of suspension seats or coil overs

I'll try to get a pic up

Located in Taylor Ridge, IL 61284
Can Ship from Eldridge, IA 52748

Get your own shipping quotes, don't be lazy

This truck .....

linky (http://www.greatlakes4x4.com/showthread.php?t=134625)

you can find the parts listed seperately in the for sale section ...

If you want to call me - 616-886-0046

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-11.jpg

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-12.jpg

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-13.jpg

I have 4 Super Swamper Trxs ATS 38x15.5/15 for $100.00 (all 4)
Local pick up in B/N area or galesburg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230001.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230006.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230004.jpg

Interested ... what's your zip so I can get an idea of where you are .. .. ..

anyone got a 14blt in west michigan for sale ?

I'll have a dually 14 bolt off in a about a month. It's 72" wms 4.10 ratio with a tight gov lock and excellent stock brakes $100.

I also have a 2001 dually 14 bolt with 1 spindle that needs the threads cleaned up on with stock disk brake brackets, and hubs, but no calipers or rotors. $75

and finally an open 14 bolt carrier 4.10 and down for $75.

a few toyota parts
http://www.pirate4x4.com/forum/showthread.php?t=787868
http://www.pirate4x4.com/forum/showthread.php?t=785969

I bought new and have title. All stock, stock tires good, looks good, runs great. $2000

I bought new and have title. All stock, stock tires good, looks good, runs great.

and.............

This truck .....

linky (http://www.greatlakes4x4.com/showthread.php?t=134625)

you can find the parts listed seperately in the for sale section ...

If you want to call me - 616-886-0046

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-11.jpg

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-12.jpg

http://i64.photobucket.com/albums/h189/two_much_talk/2ndweekendinMayFishingandsomejee-13.jpg

A 350 with d44 in the front???

Any WI or MN folks have a set of 4:11 for a Ford D44 front HP reverse rotation???

Or if anyone wants to ship??

Anyone??

Im looking for a 4.0l xj, any year, as long as it runs, the tranny is good and its 4wd. Looking to spend 500-1000.

Handsome international trade company( http://www.21shopping.com ) is a professional company to provide world-renowned brand athletic footwear and apparel, Other products. The brand Such as Nike, Jordan, Adidas, Armani, Burberry ,Coogi, Coach, ,D&G, ED-Hardy, Gucci, LouisVuitton, New era, Juicy, Prada, UGG and so on. The products such as shoes, handbags, hats, apparels, jeans, T-shirts, NFL-Jerseys, MLB-Jerseys, NHL-Jerseys, NBA-Jerseys, etc. High quality and low price, Service first, credibility first. If you have any questions or interested in our products, please feel free to contact us. We accept small orders! for more information, please view our website: ( http://www.21shopping.com )

Handsome international trade company( http://www.21shopping.com ) is a professional company to provide world-renowned brand athletic footwear and apparel, Other products. The brand Such as Nike, Jordan, Adidas, Armani, Burberry ,Coogi, Coach, ,D&G, ED-Hardy, Gucci, LouisVuitton, New era, Juicy, Prada, UGG and so on. The products such as shoes, handbags, hats, apparels, jeans, T-shirts, NFL-Jerseys, MLB-Jerseys, NHL-Jerseys, NBA-Jerseys, etc. High quality and low price, Service first, credibility first. If you have any questions or interested in our products, please feel free to contact us. We accept small orders! for more information, please view our website: ( http://www.21shopping.com )

you are going to have to get a yellow star to pimp your stuff here

http://pirate4x4.com/forum/showthread.php?t=788842

Im looking for a 77-79 F250 High Pinion D44 housing. Im located around Springfield IL.

Also need some 50% +/- 31x10.5x15" M/Ts or something similar for cheap (4)

Im looking for a 77-79 F250 High Pinion D44 housing. Im located around Springfield IL.

Also need some 50% +/- 31x10.5x15" M/Ts or something similar for cheap (4)

A guy on greatlakes4x4 had several listed a few months ago. I believe his username is Zebra5, if that's not it it at least starts with Zebra.

I've never done business with him but he seems to have a lot of 79's vintage Ford stuff.

He's near my route down to Illinois so if he comes up with one for you I can deliver part way to you depending on your location. I usually run I65 to I10/IL17 to I57 to I74 but I can also run over I80 to I55 and down to IL51.

my TPI injection system up on ebay

http://cgi.ebay.com/ebaymotors/tuned-port-injection-for-sbc-TPI-fuel-injection-350_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a1Q7c 39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50 QQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a97f51488QQi temZ320377001096QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ 5fAccessories



also selling some dodge alloy 16" rims, 5x5.5 off a 96 1500 truck.
100$

and a suzuki motorcycle stand 75$

I have pics if your interested in anything.

A 350 with d44 in the front???

The diff in this pic is a D60.

link in my last post is incorrect,

heres the right one, for my tpi setup that includes everything minus distributor to convert you small block chevy to fuel injection.

http://cgi.ebay.com/ebaymotors/tuned-port-injection-for-sbc-TPI-fuel-injection-350_W0QQitemZ320377359852QQcmdZViewItemQQptZMotors _Car_Truck_Parts_Accessories?hash=item4a97fa8dec&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A131 8

The diff in this pic is a D60.


Looks like a 44 lockout to me...

Dana 60 has a 4" hub dia. ... truck above looks like the hubs barely fit through wheel... damn close to 4"

Pics of Dana 44 & Dana 60 hubs for comparison..

also have one more listing, my buddies been trying to sell his quad,

its a 1998 (I think) yamaha warrior 350, its got a bunch of aftermarket parts, tires, wider axle, raptor rear shock, pipe, rebuilt top end, bars, the list goes on, I believe the rubber airway between the carb and the cylinder has a tear in it, and hes sick of fixing it, so he wants to sell it. I think he's looking for 900$ out of it, its red and white. A decent quad if you want to put a little bit of effort into it. might have a few more small problems, but it will make someone a cheap reliable quad with a bit of work.

I can get pics if anyones interested.

also have one more listing, my buddies been trying to sell his quad,

its a 1998 (I think) yamaha warrior 350, its got a bunch of aftermarket parts, tires, wider axle, raptor rear shock, pipe, rebuilt top end, bars, the list goes on, I believe the rubber airway between the carb and the cylinder has a tear in it, and hes sick of fixing it, so he wants to sell it. I think he's looking for 900$ out of it, its red and white. A decent quad if you want to put a little bit of effort into it. might have a few more small problems, but it will make someone a cheap reliable quad with a bit of work.

I can get pics if anyones interested.

yes please on pix... no hurry tho
sam_derrickson@msn.com

just a few things i need gone.
http://www.pirate4x4.com/forum/showthread.php?t=790782&highlight=

Im going to be in Maywood next week if anyone up North wants to save some miles, looking to get rid of a pair of jeep 300's. http://pirate4x4.com/forum/showthread.php?t=791482 I also have a balljoint 60 project axle and a scout front 44
Figure while you are in maywood you can get some rock or a black hooker and save even more money:flipoff2:

Trying to sell my XJ now - NW Indiana (Valparaiso)

http://www.pirate4x4.com/forum/showthread.php?t=792810

Im going to be in Maywood next week if anyone up North wants to save some miles, looking to get rid of a pair of jeep 300's. http://pirate4x4.com/forum/showthread.php?t=791482 I also have a balljoint 60 project axle and a scout front 44
Figure while you are in maywood you can get some rock or a black hooker and save even more money:flipoff2:



more info/ pics of balljoint 60 project please and thank you.

http://pirate4x4.com/forum/showthread.php?t=771922 Balljoint 60 parts

yes please on pix... no hurry tho
sam_derrickson@msn.com


pics sent

pics sent

thanks

any one want an 8-track player? it would be cool for a muscle car!
a long shot but whatever:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_rdc=1&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F330336852121% 3F_from%3DR40%26_trksid%3Dp2773.m38.l1313%26_nkw%3 D330336852121%26_sacat%3DSee-All-Categories%26_naf%3D1%26_fvi%3D1&item=330336852121&viewitem=&salenotsupported

Link to thread;
http://www.pirate4x4.com/forum/showthread.php?t=798764

Jess

ground hawg tires FS/FT: http://www.pirate4x4.com/forum/showthread.php?p=9987401#post9987401

link tp post http://www.pirate4x4.com/forum/showthread.php?t=796551&highlight=

http://www.pirate4x4.com/forum/showthread.php?p=9998238#post9998238

http://www.pirate4x4.com/forum/showthread.php?p=9998243#post9998243

set of four 44 inch cut boggers on 8 lug wheels , 99% tread $1000

http://www.pirate4x4.com/forum/showthread.php?t=797273&highlight=

DRW chevy dana 60 and 14 bolt 4.10 gears $1000 obo

http://www.pirate4x4.com/forum/showthread.php?p=10034716#post10034716

http://www.pirate4x4.com/forum/showthread.php?t=804025

later
jenks

And I was rite! SOLD!!!



THIS WONT LAST!!!
http://pirate4x4.com/forum/showthread.php?t=804874

i got a th350 np 203 combo in libertyville Il 60048. not sure if anyhing is wrong with it. will not shipp can dliver within reason. $150 obo

1967 M-715 Kaiser primered missing one door needs floor pans not running origional motor and trans still in it. $1200 or open to trades. Sold

Rockwell 2 1/2 ton steer rebuilt $1200 SOLD

1974 international pickup short bed 345 auto 4x4 ugly n rusty runs no tires or wheels $300

Lots of 79 ford parts and cherokee stuff let me know what you need might have it Pm me with email for pics if interrested Thanks

38.5 claws on 15" Centerlines 5 on 5.5 BP

http://www.greatlakes4x4.com/showthread.php?t=142500

Selling a 10-spline SM465 transmission from a 76 Chevy $100.00
Also a Dana 300, Main idler gear is shot but everything else good $50.00
And the icing is Novak Adapter to put the SM465 and 300 together, $250.00
Located in Decatur, IL

Got a good running 350 tbi out of a 1990 burban. has like 225,000 miles. ASking 225.00 buyer pulls. HAve area to pull and engine puller 812-215-6275. If someone buys engine they can have the tranny (slipping and transfer case needs work for 50.00 more

1967 M-715 Kaiser primered missing one door needs floor pans not running origional motor and trans still in it. $1200 or open to trades.

Rockwell 2 1/2 ton steer rebuilt $1200

1974 international pickup short bed 345 auto 4x4 ugly n rusty runs no tires or wheels $300

Lots of 79 ford parts and cherokee stuff let me know what you need might have it Pm me with email for pics if interrested Thanks

Kaiser and Rockwell sold

http://www.pirate4x4.com/forum/showthread.php?p=10151795#post10151795

http://www.pirate4x4.com/forum/showthread.php?p=10151935#post10151935

http://www.pirate4x4.com/forum/showthread.php?t=810194

http://www.pirate4x4.com/forum/showthread.php?t=809116&highlight=

Selling (5) 35x12.5/15 and (4) 15x8 on 5.5 wheels all for 400 obo.
Location: Galesburg, IL Still have plenty of tread left.

http://i371.photobucket.com/albums/oo152/xterra_309/2009_0808picsX0126.jpg

oooo whats it getting:stirthepot:

Not sure on the tire size 35's to 37's TSL and beadlocks not sure on that yet either.

that'll be cool, btw... your cat it fawkin AWESOME looking!

Where did u see the pic's of him? Ya he is a very exotic breed (hybrid)
Most expensive PUSSY i ever bought!:D

i looked at your photobucket from your sig:laughing:

EDIT: i like the lightning bolt symbol on his left side...
what do you feed him, he's really shiny

It's just the breed of cat, but i do feed him Royal Canin.

15lbs of food is $40, i'm selling my stuff just to pay for it.:flipoff2:
He weighs 27lbs added more photos of him on photobucket


I have a F-3 savannah, check out the kitten page and price.
http://www.savannahcatbreed.com/index.phpts

daym 3500:eek: they are awesome tho

99 Superduty F-550 Dana 60 - $700:
http://www.pirate4x4.com/forum/showthread.php?t=811385


1979 F250 4x4 - extended cab, 400M, c6, 8' Northman plow - $1500
http://img.photobucket.com/albums/v679/bradz71/Parts/100_1306.jpg

The people that you got your cat from was my genetics teacher in jr college and I went to school with Holly small world.

It's just the breed of cat, but i do feed him Royal Canin.

15lbs of food is $40, i'm selling my stuff just to pay for it.:flipoff2:
He weighs 27lbs added more photos of him on photobucket


I have a F-3 savannah, check out the kitten page and price.
http://www.savannahcatbreed.com/index.phpts

Time to clean out the Garage. We have a bunch of random leftover parts from the last years worth of Jeep building.


-2004 rubicon 4.10 gears (ring pinions) and factory lockers aprox 18,000 miles, replaced to go front and rear super 44's. $1000

-rubicon express control arms. 2 rear uppers, adjustable track bar, all 3 in good shape. maybe 200 miles $400.00

-TJ steering box drilled tap for hydro assist 1997-2002(?) $300.00

-TJ rear tire carrier extender. to extend stock carrier for larger spare $40.00

- complete set of stock TJ dana 30 shafts inners, outters, u-joints $150.00

-warn steps for tj $50.00

-Soft top windows for unlimited sides/rear $50.00

-36x13.5x16.5 Bias Iroks 95% tread $850

-TJ Tube Fenders, Homemade jobs, made by someone (not me) $200

-TJ Rear seat - Tan - comes w/ black cover - $150

-TJ soft top, missing one window and frame. beige - $50.00

-TJ stock flares - some sun fadeing $150.00

-Chrome TJ Light Bar w/ 2 KC lights- $100

I know we have more trash and treasures laying around. I may update this ad.

Pics upon request, or ASAP (whichever happens first)

Please do not "assume" anything. No guarantees on anything!

All prices are + shipping and obo.

All items will ship from Taylor Ridge, IL 61284

If ANYTHING seems out of line, please let me know!!!! some of these prices were a shot in the dark.
______

Take a look here if you could use a good running 5.7TBI....



http://www.cincyoffroad.com/forum/showthread.php?t=3774

No bed, no gas tank, cab corners gone, rest not too bad for a 78 in IL. Dana 44 HP front with milemarker lockouts. 9" rear. 400ci motor w/ newer Edelbrock carb, 4 speed, 205 (?) T-case, reese hitch and gooseneck plate. Runs rough (needs tune up). Cheerios for tires to move it around.

$500.

PM Me.

Pics added:

http://www.pirate4x4.com/forum/showthread.php?p=10187103#post10187103

Im selling to pay for some medical bills----

-87 xtra cab
-22r/5-speed
-trail gear doubler w/stock gears in both
-38x12.50x15's on 32 bolt beadlocks- 3 runs on tires
-rci fuel cell
-half doors
-63" chevy's in the rear
-44044's up front
-welded rear w/4.10's
-quick-lok front
-Sky's hangar kit
-Skys wide axle kit
-1.5" wheel spacers
-bobbed
-bellied up

List goes on and on.............. Shit ton of extra parts. Was my daily driver for almost 2 years............. Sad to say, but I Need it gone!!!!!!!!!! Pics off my phone-----

$3500 obo

(608)513-3251- Jeremy

dodge ram 5.9 $$$1200 OBO

http://pirate4x4.com/forum/showthread.php?t=813313



http://www.pirate4x4.com/forum/showthread.php?p=10229056#post10229056

http://southbend.craigslist.org/cto/1311311394.html

http://www.pirate4x4.com/forum/showthread.php?t=816126
:D

http://www.pirate4x4.com/forum/showthread.php?t=816834

http://southbend.craigslist.org/cto/1311311394.html

What shape are the tires in, $400 for all 4 with rims?

http://pirate4x4.com/forum/showthread.php?t=816975

bad ass snap on impact wrench:

http://pirate4x4.com/forum/showthread.php?t=816440

86-95 toyota truck bed topper

http://www.chitownracing.com/forums/search.php?searchid=1073940

gotta be a member for that link

http://www.pirate4x4.com/forum/showthread.php?t=816628
the link i meant to post, thanks for sayin something funk

http://www.pirate4x4.com/forum/showthread.php?t=818054

Im looking for a passenger-side kingpin knuckle ford HP60
ohio/penn line
tjaymurph@hotmail.com

37' Boggers
http://www.pirate4x4.com/forum/showthread.php?t=820898

Divorced NP205/NP435 combo
http://www.pirate4x4.com/forum/showthread.php?t=820886

F550 Front
http://www.pirate4x4.com/forum/showthread.php?t=811385

Still trying to sell the 79 F250 listed earlier.....

cheap starter for trail rig!

http://www.pirate4x4.com/forum/showthread.php?p=10322100&posted=1#post10322100

just some stuff
http://www.pirate4x4.com/forum/showthread.php?t=821964&highlight=

For Sale........
3.73 ring and pinion for dana 30 $75

3.73 ring and pinion for ford 8.8 $75

Wanted......
HP dana 30 from 96 xj or so

http://www.pirate4x4.com/forum/showthread.php?t=825104


still have axles to go too.

http://www.pirate4x4.com/forum/showthread.php?t=804025

later
jenks

http://www.pirate4x4.com/forum/showthread.php?p=10389036#post10389036

axles tires
winch
diff cover
locker
more

tatoodfreak

how much are you wanting to pay for the HP D30?

nevermind - just saw your in Chicago - pretty far drive for a D30

I've got my Rubi for sale in Dayton.

http://www.pirate4x4.com/forum/showthread.php?t=825406&highlight=

http://pirate4x4.com/forum/showthread.php?p=10398158#post10398158

inner C's wanted, and knuckles for them too, check it out

The 300 Dollar List -

8.8 w/ 4.10s LSD and discs

255/70-16 Goodyears on alum. Explorer rims drilled for Jeep centers

33x12.50 A/Ts on 15x10 Eagle Alloys

http://pirate4x4.com/forum/showthread.php?t=820750

Let me help get your toys home! :idea:

i have my 85 truck for sale, or trade for a land cruiser.

http://www.yotatech.com/f108/85-sr5-xtra-cab-pick-up-22re-192080/

Toyo competition tires


Links in sig

97 XJ, 4dr.

everything listed has less than 2500 miles on it. has been sitting since last august when i got the wild hair to tear it apart with no money. truck died so the non running toys go.

bilstien 5150's for a 3.5"-5" lift will also fit TJ's. have stud adapters on them, for front-$150
rubicon express mono tube shock shocks- rear fit same amount of lift.$100

rubicon express 2nd gen quick discos- $75

rubicon express 4.5" super flex lift, all new control arms, HD trackbar, full custom deaver springs in the rear-$800 will include brake lines for $50 will need your stock parts.

recessed fuel cell skid/mount, 15 gal fuel cell, msd pump, mallory FP regulator, new return lines to cell, will even help instal for a decent price- $350 for everything, will install for $450. you drive to my place you leave with a new fuel system. pics of everything

http://jeepaholics.com/support/topic.asp?TOPIC_ID=58779

ax15- runs great new timken bearings throughout-$500

new 3 core 97 and up XJ radiator-$100

new 135 amp alternator-$100

will sell entire jeep less engine for $2500. has stock rubicon wheels with some 305/70/16 all terrains on it. has custom rack partially built for the rear over the fuel cell, can help finish when things calm down for me. will run and drive anywhere with a junkyard engine, or a rebuilt 4.0. can deliver within reasonable distance, or for fuel cost.

everything is located in saint robert, mo 65584. right in the middle of missouri.

call 573-451-2697 ask for andy.

37" Pitbul Rockers hoping for a local trade for radials....

http://pirate4x4.com/forum/showthread.php?t=827365

pm sent

1999 jeep cherokee crawler

http://www.greatlakes4x4.com/showthread.php?p=1911750#post1911750

http://www.pirate4x4.com/forum/showthread.php?p=10469122#post10469122

Seat in INDIANA

http://www.pirate4x4.com/forum/showthread.php?t=830871

explorer 8.8, xj 30&35
http://pirate4x4.com/forum/showthread.php?t=827057

5 31x10.5 All Terrains, 4 are Pro-Comp, spare is Goodyear. 50% tread, mounted on XJ honeycomb wheels that are black. One tire has a small leak somewhere, just need a plug. $225 picked up in Virden IL, 30 minutes south of Springfield.

http://i33.tinypic.com/11uztxg.jpg
http://i33.tinypic.com/2vxoz6o.jpg

I have an 86 Samurai for sale

4" spoa lift
31x10.5x15 ltb super swampers 90% tread
231 buick v-6 (.60 over)
AT with shift kit
Solid body some surface rust
No time to fix up.

$2500.00

96 powerstroke F-350 4 door

http://pirate4x4.com/forum/showthread.php?t=833640

SOLD!

http://www.pirate4x4.com/forum/showthread.php?p=10550649#post10550649


Make me an offer.

I want this gone!!!

John

http://www.pirate4x4.com/forum/showthread.php?p=10550662#post10550662


Make offer, I want this gone!!!!:grinpimp:

john

I am posting for a buddy in Indy. These have been to Haspin Acres 4 times and have never been on the street. 4-37X13.50X15 bias Mickey Thompson Baja Claws on steel 15X8 Trailready beadlocks w/5 0n 4.5 bolt pattern w/3.5 backspacing. Asking $1700 for everything, prefer not to split up for now.
Call Colby @ (317)281 8969.
Thanks,
Alan
SOLD SOLD SOLD

My truck.

http://pirate4x4.com/forum/showthread.php?t=837699&highlight=

everything is obo and all prices include shipping.
1. 14in edelbrock chrome air filter houseing $35
2. 12in K&N filter never been used $30
3. 2 glass packs 27in long 2 1/4 id. $25 will not shipp
4. stock rear drive shaft out of 90 K5 blazer. $45 pick up onley.
5. roll bar for full size blazer. $50 will not shipp
everything is in 60048 can work out delivrey for the stuff i dont wana ship. if you want pics just ask

1. 14in edelbrock chrome air filter houseing $35


just the housing, no filter?

just the housing, no filter?

yep just the housing no filter

I got a 700r4 with a np208 still on it. The transmission was rebuilt and has about 6000 road miles on it. came out of a 86 pu $300

I also have a NP205 out of a 78 chevy came off a t350 and has a slip yolk. I guess these are hard to find with the slip yolk? $150

I am in Rock Island Il. p/u only

14 bolt's, Dana 44's, And 10 Bolts.


We have about 10 of each.

150.00 for the 14 Bolts. theay are full floaters, Not sure of Ratio's year, Some dual some single.

$200. for the 44's. Not sure of Ratio's yet.

$150. for the 10 bolt fronts. Not sure of Ratio's yet.


Also have a ton of 350,400 transmissions.

203,205 and 208 T cases.

Let me know what you need,
No reasonable offer refused.

This is all for sale to help out my friends family.
He was killed back in september.
Here is the link to the full article.

http://legacy.suburbanchicagonews.com/obituaries/stng-couriernews/obituary.aspx?n=dennis-m-haberstich&pid=132569023

ALL Parts Located in Kingston IL.
Got Questions Call me
847-875-6123

Gary

Chevy dana 44 front 4.11 gears, lockright, new balljoints, u-joints seals bearings. $400

14 bolt 4.11 gears $100

66 ford bronco dana 44 frontend $100 SOLD

01 wrangler automatic tranny "Radiator" like new $50
also have for the same vehicle factory repair manual $50 & rear bumper $20

Trades are welcome xj stuff, 203/205 doubler, 8lug 16 inch rims, big rubber, tools, rockwells, coilovers,

Chevy dana 44 front 4.11 gears, lockright, new balljoints, u-joints seals bearings. $400

14 bolt 4.11 gears $100

66 ford bronco dana 44 frontend $100

01 wrangler automatic tranny "Radiator" like new $50
also have for the same vehicle factory repair manual $50 & rear bumper $20

Trades are welcome xj stuff, 203/205 doubler, 8lug 16 inch rims, big rubber, tools, rockwells, coilovers,

There was no 44 under a 66 bronco, but if its a 44 im interested!

SBC Noise Gear

http://www.pirate4x4.com/forum/showthread.php?t=840814

http://pirate4x4.com/forum/showthread.php?t=840634

86 Bronco II 4x4 XLT

got a auto trans and tcase out of an 85 4cyl truck lookin to got 100 bucks for it. northwest of chicago. have other misc things a/c pump, push/pull box,front track bar, rear springs. call me 847-917-3012 Blake

Sold.

Thanks

It's just the breed of cat, but i do feed him Royal Canin. 15lbs of food is $40, i'm selling my stuff just to pay for it.:flipoff2: He weighs 27lbs added more photos of him on photobucket I have a F-3 savannah, check out the kitten page and price.
http://www.savannahcatbreed.com/index.phpts

My brother-in-law lives in the same town (Cabery) as the breeders. Very cool by the way, watched the videos on their site. Thanks for sharing.

Axles
http://pirate4x4.com/forum/showthread.php?t=841720

got a auto trans and tcase out of an 85 4cyl truck lookin to got 100 bucks for it. northwest of chicago. have other misc things a/c pump, push/pull box,front track bar, rear springs. call me 847-917-3012 Blake

sorry these are toyota parts

jeep Dana 300 http://pirate4x4.com/forum/showpost.php?p=10457281&postcount=1


Scout front 44 and other Scout parts http://pirate4x4.com/forum/showpost.php?p=10683093&postcount=110

I also have a set of 35x12.50-17 goodyear comp compound MTR's on 17x5.5 wheels looking to get 300 for them

http://www.pirate4x4.com/forum/showthread.php?p=10690847#post10690847

make offer this will hold 2 sammy's

http://www.pirate4x4.com/forum/showthread.php?t=832112&highlight=xpl951

2007 GMC 2500HD 27000 MILES

http://fortwayne.craigslist.org/cto/1507949539.html

I also have a set of 35x12.50-17 goodyear comp compound MTR's on 17x5.5 wheels looking to get 300 for them

how much for the tires no rims and how much tread is left?

looking for a running toyota 22r, motor only for an 87 truck. I am located in carbondale near SIU. I also have a set of 37x12.50 r17 MTRs 40-50% on ford 5 lug rims for sale $550.00 pm for pics and other details.

http://www.warn.com/truck/mounting-systems/images/181/XJ_bumper_front.jpg

http://rustysoffroad.com/mm5/media/bumpers/warn_xj_front_01.jpg

Warn Rock Crawler Front bumper in great shape, only 18mos. old, bought new, doens't have the brush guard. These are $780 new.

$500

Will not ship

Reply here, PM me, Call or text Chubbs @ 765-524-0035

someone buy my trailer, money not needed for christmas, so I can wait till after christmas but I need yard space. Wife about to kill me. see link above in first post

chevy th350 auto to toyota gear driven t-case advanced adapter.
$250 firm

Sold

thanks

I have the driver's side floor pan for a 2nd gen Dodge Ram from LMC truck. I can give you pictures and more info it you'd like. I'm near Cleveland, OH and would like to get $80 out of it....it's brand new and in great shape....goes for $100+shipping from LMC

6- 235/85r16 interco trxus mt
80% or better tread
$500

I have a TH400 that was mated to an NP205. Don't know too much about it, came out of a running truck. No torque converter. Looking to get $200.. located south of springfield IL. Pics available.

everything is obo and all prices are with shiping unless other wise stated.
1. 12in K&N filter never been used $30
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_sfdh007.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=sfdh007.jpg)
2. 2 glass packs 27in long 2 1/4 id. $25 + shiping
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_sfdh009.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=sfdh009.jpg)
3. box of 4 K&N filters that are 2in flange 3x4oval base 2x3 top 2 3/4 long. part number RC-1824 they are all new in box they go for $200 new ill let then go for $100.
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_Picture015.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=Picture015.jpg)
GM
3. stock rear drive shaft out of 90 K5 blazer. $45 + shiping
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_camra1388.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=camra1388.jpg)
4. roll bar for fullzise blazer can get pics if wanted $50 i can dliver or you can pick it up but will not ship
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_Picture007.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=Picture007.jpg)
JEEP/AMC
1. CJ 3in body lift new in box $75 shipped.
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_Picture011.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=Picture011.jpg)
2.FEL-PRO manifold gasket set. new in box part number ms96011 $20
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_Picture017.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=Picture017.jpg)
IH
1. 1972-1981 scout front or rear spring bushing set new in packeage. $20 shipped
http://i246.photobucket.com/albums/gg93/newguy99_photo/th_Picture013.jpg (http://s246.photobucket.com/albums/gg93/newguy99_photo/?action=view&current=Picture013.jpg)
everything is in 60048. thanks for looking Ryan.

YJ for sale, posting for a buddy:

http://www.pirate4x4.com/forum/showthread.php?t=851285

NV3500 Tranny

http://www.pirate4x4.com/forum/showthread.php?t=851266

Limited Slip Differential for a 8.25" Chrysler Axle

http://www.pirate4x4.com/forum/showthread.php?t=851264

Also have a core for a 4WD Chevy NV3500 that I would like to sell for $100, no picture. The guy I got it from said the third and fourth sychros were bad. I bought it for the tailhousing and never used it.

3.9L V6 Magnum Mopar PCM

http://dodgeforum.com/forum/parts-sales/212203-first-generation-mopar-pcm-for-v6-dakota.html

Set of 85 Toy straight axles. 4.10's. Need rebuilt - $400 OBO

35x14.50-15 Ground Hawgs - 70% tread - $400 OBOfor set of 4

35x12.50-15 Mud Terrains on 5x5.5'' teardrop rims - 80% tread - $300 OBO for set of 4

Selling for a friend:
91 2500 Chevy - 350TBI, 700R4, 6-lug 14-bolt semi float rear, light duty 3/4 ton, wrecked front, bent frame - $500

Located in Dixon, IL

2 seater comp rock buggy
http://www.pirate4x4.com/forum/showthread.php?t=851654

I've got a 79 F250, HP D44 set up for a YJ SOA. Currently on my YJ, I will not take it out until sold. It has 5.13 gears, with a Lockright locker. I just put new lockouts, ball joints, carrier bearings, inner seals, u joints, wheels bearings, and hub seals this year. Cross over steering with 1.25" DOM tubing by .25" walled, and 1 ton TRE. Sky high steer arm on the passenger knuckle. Driver knuckle is already tapped if you want to go full high steer. Comes with spare shafts that will need new joints. With not have brakes, I'm keeping the brake calipers, bracket, and rotor for my Dana 60. $500 Located in Mt sterling IL

Pics here\
http://www.pirate4x4.com/forum/showthread.php?t=849658

Mickey Thompson Classic II's 16x12, 8 on 6.5, NIB $600

http://www.pirate4x4.com/forum/showthread.php?t=852776

granville il 61326

later
jenks

Looking to sell my dana 60 and ff14

welded front and rear
4.56
four wheel disk brakes
new calipers on front
rear axle is trussed for 4 link
also included a 1410 yoke for the 60 and machined diff rings to make your own diff covers
14 is also shaved

looking to get 1200 obo
pm me NO SHIPPING

check m sig! thanks for looking:D

got 8.8 5.13 gears for sale $100

http://www.greatlakes4x4.com/showthread.php?t=162260

I might be able to give a lil better deal to somebody more local. ;)
http://www.pirate4x4.com/forum/showthread.php?t=854015

Pile of 60s
http://pirate4x4.com/forum/showthread.php?t=854387

Looking for TF 999 tranny and swap parts..will have ax15 and parts for sale and also have a AW4 tranny to trade/sell////

anyone? thanks

snip

Super duty wheels Dick Cepek DC-1 black w TRXUS MT tires
http://pirate4x4.com/forum/showthread.php?t=855618

EVERYTHING MUST GO!!! (http://pirate4x4.com/forum/showthread.php?p=10912594#post10912594)

http://www.freesmileys.org/smileys/smiley-violent008.gif (http://www.freesmileys.org/smileys.php) I'm cutn prices on everything!*http://www.freesmileys.org/smileys/smiley-violent006.gif (http://www.freesmileys.org/smileys.php)

Get um while their almost half price!!!*

As I'm sure most of you know, I will haul for you. I need these gone so tell your budys!

*(limited time offer)

I have a set of 4 super swamper tsl sx tires 38.5x14.5x15 about 3/4 tread on 15x10 8 lug rims. I am in green bay wi. e mail me at jaklin@netnet.net

SOLD!!!

79 Ford High Pinion Dana 60 (http://pirate4x4.com/forum/showthread.php?t=857478)
Ready to wheel!!!

I gotta make room for the Rockwells!!! :smokin:

She wants to trade for a TJ :shaking:

CLICK ME CLICK ME CLICK ME (http://pirate4x4.com/forum/showthread.php?t=858732)

I have 4 Super Swamper Trxs ATS 38x15.5/15 for $100.00 (all 4)
Local pick up in B/N area or galesburg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230001.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230006.jpg

http://i371.photobucket.com/albums/oo152/xterra_309/2009_04230004.jpg



tires still for sale

Sold along time ago sorry

Richfield, Wisconsin, north of Milwaukee 25 minutes

6 - Champion Beadlocks 15"

4 - 38.5x15x15 Grooved Boggers 90%

www.pirate4x4.com/forum/showthread.php?p=11004889#post11004889

98 XJ HP dana 30 137K on axle
Riddler diff cover $60 shipped
new unit bearings - $80 shipped only 10k on them
sleeved, and beefed UCA, and new Balistic fab LCA mounts
3.55 gears, open,
sleeved tie rod,
gofeit otk tie rod insert
spare unit bearings included - $40 for pair shipped
whole axle for $250 OBO or name your price for the parts
Will separate any part

98 XJ 29 SPLINE 8.25 open diff 137k on axle
Diy diff cover
new wheel cylinder on driver side,
3.55 gears,
shaved,
spare axle shaft included - $60 shipped
whole axle for $100 OBO or name your price for the parts

Will separate any part


all prices are negotiable, and I am very flexible looking to sell to fund my new axles, can ship on your dime and can separate if your price is right....make me an offer you never know I might take it for all or some of the parts. pics are in my build thread Micah's Jeep build My email is micahbeccabyrd@gmail.com, and you can call me at 419-310-8310
paypal or cash please...Thanks for looking...
__________________

everything is obo and all prices are with shiping unless other wise stated. i can get pics of anything you want

shakespeare boat antenna 36in base loaded. its marked $56 on the box frome bass pro ill let it go for $40

warn winch remote 4 prong. $40

1. 12in K&N filter never been used $30

2. 2 glass packs 27in long 2 1/4 id. $25 for bolth + shiping

3. box of 4 K&N filters that are 2in flange 3x4oval base 2x3 top 2 3/4 long. part number RC-1824 they are all new in box $100 these fit all kinds of things look it up
GM
3. stock rear drive shaft out of 90 K5 blazer. $45 + shiping

4. roll bar for fullzise blazer can get pics if wanted $50 i can dliver or you can pick it up but will not ship

JEEP/AMC
1. CJ 3in body lift new in box $75 shipped.

2.FEL-PRO manifold gasket set. new in box part number ms96011 $20

everything is in 60048. ill have pics up later today thanks for looking Ryan.

http://www.pirate4x4.com/forum/showthread.php?p=11033853#post11033853

Toyota truggy for sale...........

http://pirate4x4.com/forum/showthread.php?t=863849

CJ7 Hard top...black...not in mint condition but pretty darn nice...$700

Full steel doors...painted Ford "Dark Shadow Grey"...spice panels...$700

$1200 for it all

Can send pictures upon request...just give me an email address...

In Madison, WI

Willing to take partial trade for

Ready Welder
Dana 44 ARB

More parts from my YJ

You next Engine/Trans/Tcase (http://www.pirate4x4.com/forum/showthread.php?t=866945) :grinpimp:

Do you have the powersteering bracket and pump for the AMC 360?

yeah I do, but I'm not parting anything out from the motor - want to sell it as complete.

I am looking for a set of small bearing gm dana 44 spindles. Anybody help me out? please pm me if you can!

Need an Atlas pass drop as well. Or a Stak.

http://indianapolis.craigslist.org/pts/1624262237.html

toyota and sami parts

Went junking today and found a 74 Scout @ Bridgeway in Moline. It looks to be in pretty good shape and most of it was still there! Just wanted to let anyone who might be interested know!

Dana 44 6 lug spindles from waggy 44 $50 plus ride

NP205 slip yolk style from t350 looks like input shaft might be tweeked $50 PU ONLY

3 speed trans and twin stick transfer case from scout 800 dont know if it works $30 PU ONLY

Looking for 12.4x24 or similar ag tires along with rims for tons.

For sale 11.2x16 goodyear dynatorque 2s on 16inch gm 8 lug rims barely used, i want bigger. Or trade for the above tires

4cyl toyota t-case $100

advanced adpt. toyota t-case to turbo 350 tranny $150

sm465 tranny $100

http://www.pirate4x4.com/forum/showthread.php?t=870553

http://www.pirate4x4.com/forum/showthread.php?t=868030

got a dana 60 e- locker for sale (4.56 and up, 30 spline) no wiring, just locker
$350

also got a d60 ford front low pinion driver drop(around 1975) 35 spline inner, 30 spline outer,kingpin, complete hub to hub, 4.56 gears, probably needs seals but that's it
$800

pm if interested
thanx

new price and pics for CJ7 hard top and doors...

http://www.pirate4x4.com/forum/showthread.php?t=864525

Selling a set of military 2.5 ton axles. Both in good working condition, need rebuilt.

Front is the older Timken style ball and fork steering joint

Both are complete

Asking $1200 OBO, located in Dixon, IL.

http://pirate4x4.com/forum/showthread.php?t=871662

Selling two sets of 5x4.5 wheels. Located Dixon, IL. Cash only.

One set are 15x10 painted steelies, they were on my BII for a few years, good shape for a trail rig. $80


One set of 15x10 aluminum. Good shape, could use a polishing. $100

in the sig

complete 4.2 258 from my YJ, runs great, uses no oil..4 month old Weber carb..Will sell complete for $300, or just carb for $225 plus the ride..In Alton Il. area..

Divorced NP435 and NP205 combo, fully rebuilt, 0 miles since rebuild, $500 OBO:

http://www.pirate4x4.com/forum/showthread.php?t=774877

I have four 39.5 Boggers for 15 inch rims. They all hold air and have no plugs or holes, they do have lots of rock rash. I am only changing now because of buying new 44 boggers. Or I would still be running these. $400 for a fast sell. I'm in Terre Haute....

http://www.pirate4x4.com/forum/showthread.php?t=873727

anybody got any full floater GM 14 bolt rear axle? preferred with 4.10. disk conversion will be a bonus

anybody got any full floater GM 14 bolt rear axle? preferred with 4.10. disk conversion will be a bonus

I've got a DRW 14-bolt for $100 if that works for you. Right off I-88 in Dixon.

heres my sammi for sale
http://pirate4x4.com/forum/showthread.php?p=11206897#post11206897

anybody got any full floater GM 14 bolt rear axle? preferred with 4.10. disk conversion will be a bonus

bump, still looking

Cummins 12 Valve (http://pirate4x4.com/forum/showthread.php?t=877562)

bump, still looking

got what I need, thank Dave :grinpimp:

got what I need, thank Dave :grinpimp:

Anytime! :smokin:

http://www.pirate4x4.com/forum/showthread.php?t=878233

http://www.pirate4x4.com/forum/showthread.php?t=878278

Got a 4.2L out of an 88 YJ. Ran somewhat but smoked, has all accessories including starter, flywheel and clutch. Only thing I've robbed off it is the coolant temp sensor, air filter shroud and a drivers side engine mount.

Good parts for a DIY stroker!

$150

http://s241.photobucket.com/albums/ff239/500inches/parts this is about 75% of the parts i have.
12" lift, 6" lift, dana 60 front dana 70 hd rear, dana 60 rear, dana 44 front parts, hydro assist steering, 42" tsl with eaton 14" wise 8 lug streetlocks, rust free 73-87 gm truck parts, 350 sbc, 302 sbf, 379 cid diesel, th400 4x4, th400 with np203, sm465 4x4 with 32 spline out put, 16x8 8 lug eagle alloys, 15x10 6 lug eagle alloys, 3/4 ton 4x4 gm frame, 73-87 blazer/ jimmy suburban, crew cab parts.,

I am looking for a set of small bearing dana 44 GM spindles.
Anybody help me out?
PM me what you got!

Got a FF 14 bolt, bottom has been shaved, still needs replated. No brakes.

Shafts, hubs, R+P, diff, yoke, etc all there. Some pitting on spindles, but I believe it can be cleaned up.

Comes with the following Ballistic parts:

Pinion guard, leaf perches, shock mounts, bolt on caliper brackets

Stock perches are still on there, shock mounts are gone. Looking to get $225. Located 30 minutes south of springfield, IL.

http://i41.tinypic.com/25kjtjr.jpg

http://i42.tinypic.com/14xkkki.jpg

http://i42.tinypic.com/10mv6eh.jpg

http://desmoines.craigslist.org/pts/1693072599.html

Looking for Rear TJ Coils. 4"
PM Me
Thanks !

Thinkin about selling my wheels/tires. They are 17x9.5 Allied RockAThon Soft 8 beadlocks. 5x4.5 bolt pattern. 32 bolts per wheel that have been recently replaced. The rings have some rock rash on them, but are in otherwise good shape. When I had them balanced they said one of them was slightly bent. These sell for $230/ea new.

They are mounted on 33x12.5 Swamper TrXus M/Ts that have probably 1/4 tread remaining. Ive had them down to 4lbs with no issues. I really don't want to seperate. $475 obo, located 30 minutes south of Springfield.



SOLD.

Instead of selling, I WTB some ford 16.5 (8x6.5) wheels. I need 5.:D

1984 Chevy 1 ton, 60/14 bolt, 454, 44 gumbo's, good property/mud truck for cheap. $1800 or best offer. I'll get some pics posted when I get a chance. Won't take much to get it in wheeling shape.

1984 Chevy 1 ton, 60/14 bolt, 454, 44 gumbo's, good property/mud truck for cheap. $1800 or best offer. I'll get some pics posted when I get a chance. Won't take much to get it in wheeling shape.

where?

Illiopolis, 20 minutes East of Springfield.

1992 jeep wrangler 6cyl. 5 spd. with spring over and 3 inch lifted spring mounts. slip yoke eliminator and custom built cv driveshaft (will be here in the next couple days) and one piece front axle shaft to eliminate the vacuum crap. also has hard top and hard doors. little rust but not bad. like to get 3800 or best offer. 217-855-0866

http://i237.photobucket.com/albums/ff183/crashnrun1/downsized_0411000907.jpg

i also have a 79 bronco that has a 400 with edelbrock car and intake. it has blocks in the rear. on rollers but will clear 35's easy. the body is in great shape but ha a little rust around the rear fenders. other than that it is very solid and pretty clean. 1600 o.b.o. 217-855-0866
http://i237.photobucket.com/albums/ff183/crashnrun1/downsized_0418001724.jpg

also have a brand new in the box lift with pitman arm and track bar drop bracket. will sell all for 375 o.b.o.

Got my 99 TJ for sale, $6,000.00 located near Decatur, IL
Custom 2" x 4" frame, 4-link and coils on rear, leafs on the front. 38" TSL on 32-bolt beadlocks, 14-bolt rear w/ detroit, dana 60 w/ OX locker front, 350 engine, rebuilt B&M 350T with new torque converter, dana 300, hydro steering, alumn radiator. trans cooler. flat front fenders, cut out rear wheel-wells. Only has bikini top and half doors.
Phone 217-519-9502
Greg

Got my 99 TJ for sale, $6,000.00 located near Decatur, IL
Custom 2" x 4" frame, 4-link and coils on rear, leafs on the front. 38" TSL on 32-bolt beadlocks, 14-bolt rear w/ detroit, dana 60 w/ OX locker front, 350 engine, rebuilt B&M 350T with new torque converter, dana 300, hydro steering, alumn radiator. trans cooler. flat front fenders, cut out rear wheel-wells. Only has bikini top and half doors.
Phone 217-519-9502
Greg

i would like to see some pics of this!

Parting out whats left of my TJ crawler project

http://www.pirate4x4.com/forum/showthread.php?t=879043

Instead of selling, I WTB some ford 16.5 (8x6.5) wheels. I need 5.:D

I have some re-centered H1 rims and tires that I might be willing to part with here in a few weeks. Only have 4 though, I need five 16" steel rims 8 on 6.5" and 35" tires.

There is a pic at the very bottom of the link below.


http://www.taboocustoms.com/xjdrivetrain.htm#402139488

Need a 258 close to Quincy IL.

http://www.pirate4x4.com/forum/showthread.php?p=11329024#post11329024

I have some re-centered H1 rims and tires that I might be willing to part with here in a few weeks. Only have 4 though, I need five 16" steel rims 8 on 6.5" and 35" tires.

There is a pic at the very bottom of the link below.


http://www.taboocustoms.com/xjdrivetrain.htm#402139488


How much for the H1 wheels? Im close to Springfield IL. Thanks

Id go $350 on them with the tires.