http://s694.photobucket.com/albums/vv302/Baileigh_Industrial/th_baileigh_logo__small.jpg

Baileigh RDB-050

Baileigh RDB-050 Tube Bender, 3 speeds, Large Capacity Tubing and Pipe Benders - YouTube (http://www.youtube.com/watch?v=Dk-LnQnlSAs&feature=player_embedded)

The RDB-050 tube bender makes the other benders
out there look like baby toys.
There are many advantages to the RDB-50 over
other manual benders on the market.



The highest capacity of any manual bender on the market
3 bending speeds
Massive 1" Thick bending plates for massive capacity
180 degrees in one shot, you do not need to stop every 40 degrees and re-pin or start the bend over
2 1/2" OD capacity
Aluminum bronze bushings at all pivot points for a long service life
Heat treated pins
Anti-spring back lever
Fast and easy hook arm inserts for different size tube, no U straps to mess with
Replaceable aluminum bronze counter bend die insert
Affordable die sets are available in 90 or 180 degrees
Best bend quality on the market
Made to last
Ship UPS in 3 boxes

Check out the videos:

Baileigh RDB-050 Tube Bender, 3 speeds, Large Capacity Tubing and Pipe Benders - YouTube (http://www.youtube.com/watch?v=4FiilR1Ht7E&eurl=http%3A%2F%2Fwww%2Ebii1%2Ecom%2Fvideos%2Dpage s%2Frdb%2D050%2Dvideo%2Ephp&feature=player_embedded)

Baileigh RDB-050 Tube Bender Bending 2.5" x .120" Wall Mild Steel Tube 180 Degrees 2 Minutes 35 Sec - YouTube (http://www.youtube.com/watch?v=jJlmGTO3OTU)

Baileigh RDB-050 Tube Bender Bending 2" x .120" Wall Chromolly Tube 180 Degrees 2 Minutes 40 Sec - YouTube (http://www.youtube.com/watch?v=JOBe5Zcy95Y)

http://i694.photobucket.com/albums/vv302/Baileigh_Industrial/DSCF1835.jpg?t=1237560685

Baileigh Industrial’s newest bender, the RDB-050, was designed from the ground up to deliver world class bend quality in an affordable package. This unit is aimed squarely at the serious home fabricator who may not be able to justify a larger hydraulic or programmable bender but still wants the quality and performance Baileigh Industrial is famous for.

This revolutionary new design incorporates features previously seen only on much more expensive benders. Heavy duty bushings incorporated at all wear points for incredible service life and increased bend capacity. This is a bender for life!

Three speed operation makes quick work of any bending job. Simply change pin location to adjust the amount of movement per “pull” (4, 8, or 12 deg.) – no confusing or time wasting disassembly required. For very light weight materials the operator can bend in one smooth pull all the way to 200 deg. This new leverage action along with an incredibly rigid framework allows for huge bend capacity – up to 2 1/2” OD (.120” wall) Mild Steel or 2” OD (.120” wall) Chromolly Tubing.

A simple anti-spring back mechanism assures precise bend control and increased operator safety. At no time does the operator have to “hold” the arm in place and be subjected to dangerous backlash, an important consideration when bending the likes of Chromolly. Tooling changeover is fast and easy as no disassembly of the machine is necessary. Simply pull a few pins and slide in the new tooling – it’s that easy! The whole process can be accomplished in a matter of seconds.

Once the part is completed simply slide the finished piece out of the machine. Our innovative design eliminates the need to disassemble the unit or remove tooling to release your work piece making the bend process clean and simple. Round tube tooling is available for either 90 or 180 degree bends and incorporates the same replaceable aluminum/bronze counter die inserts that Baileigh Industrial is famous for. Hook arm inserts for varying tube sizes assist with fast tooling changes. True to form, our tooling remains the best in the industry.

The RDB-050 bender kit comes complete with the stand, handle and degree dial included. Simply add your desired tooling sizes and you can be up and bending in no time. It is UPS shippable to keep freight charges reasonable.

If you would like a quote, reply to this thread, shoot us a PM or call your Baileigh Rep for more details


http://i694.photobucket.com/albums/vv302/Baileigh_Industrial/DSCF1839.jpg?t=1237559319 http://i694.photobucket.com/albums/vv302/Baileigh_Industrial/DSCF1832.jpg?t=1237559368

http://s694.photobucket.com/albums/vv302/Baileigh_Industrial/th_baileigh_logo__small.jpg

I saw it at the Wisconsin Racers Expo in West Bend and all I can say is WOW! Now I really wish I had waited before buying my JD bender last fall - I will probably have to sell it and get this one. So much easier to change over dies and very little effort to do even 2" Chromolly. The biggest thing is the bend quality - no flat radius bends! This thing looks way overbuilt for the money. Serious quality there. This thing is sweet!

Can I get a quote for the bender and 1 3/4 die shipped to Chicago 60606

ditto to 94538

Can I get a quote for the bender and 1 3/4 die shipped to Chicago 60606

I sent you a PM with the quote!


Thanks!

ditto to 94538

PM sent!

Thanks!

Bender + 1.75" die to 45342 please.

Is there a provision for hydraulic upgrade?

Bender + 1.75" die to 45342 please.

Is there a provision for hydraulic upgrade?

I sent you a private message with your quote.

Price on bender and 1 3/4", 1 1/2", and 1" die shipped to 98596? Could you break down the pricing on the dies?:D

Price on bender and 1 3/4", 1 1/2", and 1" die shipped to 98596? Could you break down the pricing on the dies?:D

PM sent


Thanks!

Dude! I need a quote on the bender and a full die package. Got rid of the JD2 and need to pick one of these up. I can pick it up so don't worry about the shipping. Any chance on getting one before June?

Price on bender and 1 3/4", 1 1/2", and 1" die shipped to 98277.

Price on bender and 1 3/4", 1 1/2", and 1" die shipped to 98277.


PM sent!

Thanks!

Dude! I need a quote on the bender and a full die package. Got rid of the JD2 and need to pick one of these up. I can pick it up so don't worry about the shipping. Any chance on getting one before June?

PM sent.

June 1st is a "ball park" date of when these will be ready. Didn't I see you at the Racers Expo a couple weeks ago?

quote for bender plus 1" & 1.75" die to 98208 please,
Thank you

quote on bender and 1 3/4 die to 84321 thanks

quote on a bender and 1 1/2 die to 13669

quote for bender and 1.75 tube die, to 33187.

thanks,

Thanks Shane I do also need a quote with some die prices. I am not sure which ones I need please help.

Thanks

quote on bender with 1", 1.5", and 1.75" dies to 20171, thanks

Could you quote shipped to 80487 biz address? Looking for the break-down for a 1 inch square, 1 inch round tube, 1.75 tube and a 1.5 X1.5 square die. Can it be upgraded to hydro down the road?

Thanks,
Peter

quote for bender plus 1" & 1.75" die to 98208 please,
Thank you

PM sent!

Thanks!

quote on bender and 1 3/4 die to 84321 thanks

PM sent!


Thanks!

quote on a bender and 1 1/2 die to 13669


PM sent!


Thanks!

quote for bender and 1.75 tube die, to 33187.

thanks,

PM sent!


Thanks!

Thanks Shane I do also need a quote with some die prices. I am not sure which ones I need please help.

Thanks

PM sent, thanks!

quote on bender with 1", 1.5", and 1.75" dies to 20171, thanks

PM sent thanks!

Could you quote shipped to 80487 biz address? Looking for the break-down for a 1 inch square, 1 inch round tube, 1.75 tube and a 1.5 X1.5 square die. Can it be upgraded to hydro down the road?

Thanks,
Peter

sent quote!


Thank you!

Thanks Shane I do also need a quote with some die prices. I am not sure which ones I need please help.

Thanks

Hope my PM answered all of your questions. Let me know if you need more info, or just give me a call

quote for the bender, 1, 1.25, 1.5, 1.75, and 2" dies broken down for each die and shipped to 99208 please? Will be posting info for local 4x4 forum. Thanks!

quote for the bender, 1, 1.25, 1.5, 1.75, and 2" dies broken down for each die and shipped to 99208 please? Will be posting info for local 4x4 forum. Thanks!

PM sent!

What local forum?

Can I get a quote for a bender and 180 degree round tubing dies (1", 1.5", 1.75") shipped to 84296.

Thanks! :smokin:

Can I get a quote for a bender and 180 degree round tubing dies (1", 1.5", 1.75") shipped to 84296.

Thanks! :smokin:

PM sent!


Thanks!

Can you give me a quote on the bender and all the dies that come with it plus shipping to 95822.. Thanks, jack:d

bender plus all dies, broken down die prices shipped to 40502 please, also, can it do square tubing?

Can you give me a quote on the bender and all the dies that come with it plus shipping to 95822.. Thanks, jack:d

PM sent


Thanks!

bender plus all dies, broken down die prices shipped to 40502 please, also, can it do square tubing?

PM sent

thanks!

Shane,
Thanks for your help the other day on the phone. I just recieved the new catalogue and hat- thank you.

Curious about pricing and shipping of the rbd-100, mainly for the access to square tubing dies.

Could your quote the machine price along with, 1.5 square die, 1 inch pipe die, 1.75 tubing and 1.5 tubing die.

Thank you,
Peter

quote for bender and 1.75 dies to 23666 buisness???

quote for bender and 1.75 die to 80634

thanks

Shane,
Thanks for your help the other day on the phone. I just recieved the new catalogue and hat- thank you.

Curious about pricing and shipping of the rbd-100, mainly for the access to square tubing dies.

Could your quote the machine price along with, 1.5 square die, 1 inch pipe die, 1.75 tubing and 1.5 tubing die.

Thank you,
Peter

PM sent!

Thanks!

Price on bender and 1 3/4" die shipped to 77493.

Can I get a quote on the bender and die set(1.5, 1.75, 2) to 80433. Thx

Price on bender and 1 3/4" die shipped to 77493.

PM sent, thanks!

Quote for bender and 1.75 die shipped to 17362.

Qoute for bender and 1 3/4" and 1". with a break down on die prices. I would like to pick mine up.

Thanks,

Dave

quote on bender with 1.75 dies to 58329 please.

Quote for bender and 1.75 die shipped to 17362.

PM sent, thanks!

Qoute for bender and 1 3/4" and 1". with a break down on die prices. I would like to pick mine up.

Thanks,

Dave


Sent you a PM

quote on bender with 1.75 dies to 58329 please.

PM sent, thanks!

quote on bender with 1.5", and 1.75" dies to 80501, thanks

quote on bender with 1.5", and 1.75" dies to 80501, thanks


Longmont!

PM sent!

a quote to 83801

Quote for bender and 1.75 die to 94550

quote on bender with 1.75 dies to 41831 thanks

quote on a bender and 1.75" die, to 76053.
thanks,
clay

quote on bender, 1.75 tube die and 1inch pipe die to 95519 thanks

PM's Sent.

Thanks guys!

Quote with 1.5" die to 03894.

Thanks

Quote for bender and 1.75 die to 94550

PM's Sent.

Thanks guys!

I didnt get any PM from you.

Quote on bender with 1.25 and 1.75 dies, to 17728. Thanks for your time.

I didnt get any PM from you.

Sorry about that, you have it now!

Quote on bender with 1.25 and 1.75 dies, to 17728. Thanks for your time.

PM sent, Thanks!

Quote for bender and all different dies.
Shipped to P3P 1R3. Ontario, Canada.
Thanks.


Sean :cool:

PM sent, Thanks!

quote on bender and 1.5 and 1.75 dies to zip code 44720

thanks!

Quote on bender 1.5, 1.75, and 2" dies. To 71111 please

quote with 1.25,1.5,1.75 to 72901. thanks

PM's sent out. Thanks Guys!

Hope everyone had a great weekend!

Can I get a quote for the bender and 1 3/4 die shipped to 76247

How about a quote for bender and 1 3/4 die to 64139.

PM's Sent!

Only a few weeks to take advantage of the introductory specials!

I didn't get a PM, but I am still looking for a bender and 1.5" dies to 03894.

Thanks, Tim

Coming your way now!

Quote for the bender and 1.75 die to 53207 (if I don't win the giveaway)?

I just ordered mine, I cant wait to try it out.

quote for a bender + 1.75" die to 70810 please.

also, im pretty new when it comes to this type of work. how close can you get 2 different angle bends together?

Price on bender and 1 3/4", 1 1/2" dies, shipped to 43017 business address? Could you break down the pricing on the dies?

Pricing is on the way guys!

Units are on schedule for June 1st. Don't let this one get away!

quote for bender and dies broken down thanks to 43078

quota please with bender, 1 1/2, 1 3/4 dies broke down shipped to 49345.

Quote please for Bender with 1 3/4" 180 degree die shipped to 48328.
Also separate price on 1 5/8" 180 degree die as well. Thanks

What does that weigh? The vid is badass, and it looks easier to use than the one I have, but it doesn't look like it lends itself to being swaped in and out much. You would almost need dedicated floor space is that how you designed?

Quote on Bender and 1.75 die to 77845.

Thanks

What does that weigh? The vid is badass, and it looks easier to use than the one I have, but it doesn't look like it lends itself to being swaped in and out much. You would almost need dedicated floor space is that how you designed?

All you need is 4 holes drilled in the floor with 4 anchors. Just put it in the corner when you are not using it. PM sent.

Thanks!

Quote on bender, 1.75", 1.5", & 1.25" dies, to 49329.
Thanks.

Can I get a price on the RDB-050 bender with 1" and 1.625" dies, to 80129.

Thanks.

Quote for a bender and 1.75" die to 02134 please.

Quote on bender, 1.75", 1.5", & 1.25" dies, to 49329.
Thanks.

PM sent, thanks!

Can I get a quote for the bender and 1 3/4 die shipped to Abq 87108

Can I get a price on the RDB-050 bender with 1" and 1.625" dies, to 80129.

Thanks.

PM sent!


Thanks!

could i get a quote with a 2" and 1.5" die. thanks

Quote for a bender and 1.75" die to 02134 please.


PM sent

Thanks!

Can I get a quote for the bender and 1 3/4 die shipped to Abq 87108

PM sent!

Thanks!

Bender and 1.75" die to 21226

thanks,

Rob

could i get a quote with a 2" and 1.5" die. thanks


PM sent, thanks!

I would like to get a quote on the bender & 1.750" 180 degree die. shipped to 39042. Thanks

quote for 1.75 tubing die and bender to 67010

Quote for bender + 1.5 die to 01468

Thanks

quote on a bender and 1 1/2 die to 01801

Can I get a quote for the bender and the 180 degree 1.75 die to 87106. Thanks.

Bender and 1.75" die to 21226

thanks,

Rob

PM sent!



Thanks!

Can I get a quote for the bender and 1 3/4 die shipped to 06013

Bender and 1 1/2 die. To 37312

I would like to get a quote on the bender & 1.750" 180 degree die. shipped to 39042. Thanks


PM sent

Thanks!

quote for 1.75 tubing die and bender to 67010



PM sent

Thanks!

bender and 1.75 die to 78729

Quote for bender + 1.5 die to 01468

Thanks

Linkpin!

Your bender should ship in a couple of days. Thanks!

quote for bender and 1.5 die to 35148

quote on bender and 1 3/4 die to 92307 thanks

Can I get a quote for the bender and 1.75" to 85296. I assume the pedestal and handle are NOT included? If not can you itemize those out and put them in the quote as well?

Thanks

Mike

Bender and 1-3/4" die shipped to 70506, please

ETA: Like the guy above mentioned, I want the handle, stand, degree ring (is the ring even detachable?), 180* die, the whole setup.

Check out the new video!

YouTube - Baileigh RDB-050 Tube Bender, 3 speeds, Large Capacity Tubing and Pipe Benders (http://www.youtube.com/watch?v=4FiilR1Ht7E&eurl=http%3A%2F%2Fwww%2Ebii1%2Ecom%2Fvideos%2Dpage s%2Frdb%2D050%2Dvideo%2Ephp&feature=player_embedded)

I need a quote for the Bender complete and dies for 1", 1.5", and 1.75" to 92064

quote on a bender and 1 1/2 die to 01801

PM sent, thanks!

Quote on complete bender with 1inch, 1.5 and 1.75 dies shipped to 83854. Please seperate the die prices individually if possible.
Thanks

Can I get a quote for the bender and the 180 degree 1.75 die to 87106. Thanks.


Sent quote, thanks!

Can I get a quote for the bender and 1 3/4 die shipped to 06013

PM sent


Thanks!

Quote for RDB-050 bender and 1.75" 180* die shipped to 95821. Thanks

price on bender complete and 1",1 1/2,1 3/4 die shipped to 93305

Bender and 1 1/2 die. To 37312

PM sent!

Quote for bender and 180% 1.75 die shipped to 96142

Bender and 1-3/4" die shipped to 70506, please

ETA: Like the guy above mentioned, I want the handle, stand, degree ring (is the ring even detachable?), 180* die, the whole setup.

Thanks Ben!

PM sent

I need a quote for the Bender complete and dies for 1", 1.5", and 1.75" to 92064


PM sent

thanks!

Quote on complete bender with 1inch, 1.5 and 1.75 dies shipped to 83854. Please seperate the die prices individually if possible.
Thanks

PM sent!

Can I get a quote for with 1 3/4" dies to 98947.

Thank you.

Bender + 1.75" die to 92154 please.

Tnx.

Quote for complete bender and 1.5 & 1.75 die sets to 98424 business address.

Quote for complete bender and 1.5 & 1.75 die sets to 98424 business address.


Nice avatar!

Ha Ha :D

Nice avatar!

Ha Ha :Dtest from my Blackberry!

Quote with 1.75" dies to 77450.
Thanks.

Quote for RDB-050 bender and 1.75" 180* die shipped to 95821. Thanks

PM sent, thanks!

price on bender complete and 1",1 1/2,1 3/4 die shipped to 93305

pm sent

thanks!

Quote for bender and 180% 1.75 die shipped to 96142

PM sent!

Price on Bender and 1.75 180 degree die to 68164. Does the zero interest deal on your other post apply to these?

Thanks!

Quote for RDB-050 bender and 1.75" 180* die shipped to 43112. thanx:D

Does the zero interest deal on your other post apply to these?

Thanks! 0% interest is for business only! I tried that.
Its a good deal for one year.

What ever you do don't use these guys "Direct Capital Corporation" (http://www.directcapital.com/ContactUs.aspx)

They tried to charge me $1516 to borrow $2444 for 2 years with $330 up front.

Needless to say since I couldn't use a business I paid cash and mine should be on its way.. :D

Thanks

Terry~!

Can I get a quote for with 1 3/4" dies to 98947.

Thank you.

PM sent!

Quote for bender + 1.75" 180deg die to 70665.

Thanks,
Rob

ordered:smokin::smokin:

Guy's stop second guessing and do it. Think about how much money you will actually SAVE by buying a quality bender.

DIY weld in cage. $1000
Shock hoops. $200
Diff guard. $100
Cross member. $200
Axle truss. $100
Rocker Guards. $200
Bumpers. $400

It will pay for itself. Now do all this shit for the guy down to road, and charge him for it because he is to dumb to buy one for himself.

Now your making money. Can't go wrong.:smokin:

would you quote a manual bender, 1, 1-1/2 & 1-3/4" dies?

ordered:smokin::smokin:

Guy's stop second guessing and do it. Think about how much money you will actually SAVE by buying a quality bender.

DIY weld in cage. $1000
Shock hoops. $200
Diff guard. $100
Cross member. $200
Axle truss. $100
Rocker Guards. $200
Bumpers. $400

It will pay for itself. Now do all this shit for the guy down to road, and charge him for it because he is to dumb to buy one for himself.

Now your making money. Can't go wrong.:smokin:

Shipped!

Shipped!

PM me the tracking number please. It is going to the shop where I work, but I am a field guy. So I will not be the one unloading it from the truck. I need to know if it came in or not. The guys I work with like to play games. Games that may get them HURT:evil:.

PM me the tracking number please. It is going to the shop where I work, but I am a field guy. So I will not be the one unloading it from the truck. I need to know if it came in or not. The guys I work with like to play games. Games that may get them HURT:evil:.

Games that get them hurt! :smokin: Right on.

I wouldnt be suprised if they tried to steal the RDB-050 it is so cool!

PM sent on your tracking

It's at the shop!:D:D:D I will have pics up by 10..ish (I'm still in the field). SO, STAY TUNED GENTLEMEN.........

Ours made it yesterday.

1st box was a teaser. Came a day before the bender. it contained a very nice hat and catalog. Baileigh stickers for my rigs would be nice "hint"
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546303190452_100000052487305_41900_5604553 _n.jpg
pallet with all the boxes. degree wheel is on the bottom.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546313190451_100000052487305_41902_4291224 _n.jpg
Degree wheel alone weighed 92 pounds.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs126.snc1/5409_101546339857115_100000052487305_41910_4244871 _n.jpg
Parts inventory
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546353190447_100000052487305_41914_2768906 _n.jpg
dies and followers.
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs126.snc1/5409_101546329857116_100000052487305_41907_4492422 _n.jpg
Head engineer checking fitment. :)
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546359857113_100000052487305_41916_4063669 _n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546369857112_100000052487305_41917_3326680 _n.jpg
Almost ready to work
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101552076523208_100000052487305_42122_3589743 _n.jpg

I'm overly impressed. The people at Baileigh go the extra mile.

Thanks to you all.

Terry~!

Ours made it yesterday.

1st box was a teaser. Came a day before the bender. it contained a very nice hat and catalog. Baileigh stickers for my rigs would be nice "hint"
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546303190452_100000052487305_41900_5604553 _n.jpg
pallet with all the boxes. degree wheel is on the bottom.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546313190451_100000052487305_41902_4291224 _n.jpg
Degree wheel alone weighed 92 pounds.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs126.snc1/5409_101546339857115_100000052487305_41910_4244871 _n.jpg
Parts inventory
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546353190447_100000052487305_41914_2768906 _n.jpg
dies and followers.
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs126.snc1/5409_101546329857116_100000052487305_41907_4492422 _n.jpg
Head engineer checking fitment. :)
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546359857113_100000052487305_41916_4063669 _n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101546369857112_100000052487305_41917_3326680 _n.jpg
Almost ready to work
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5409_101552076523208_100000052487305_42122_3589743 _n.jpg

I'm overly impressed. The people at Baileigh go the extra mile.

Thanks to you all.

Terry~!


Thanks Terry! Nice hat on the boy! Let's see some wheeling pics with your new hat!

Price on bender with 1 3/4 dies to 77474

bender + 1.5,1.75 dies to 39073

Price on bender and 1 3/4", 1 5/8, 1 1/2", and 1" die shipped to 58265? Could you break down the pricing on the dies?:grinpimp:

Quote on an RDB-050 with 1.75" die (240 degree?) please!

Shipped to 60014 but I'd like to see it itemized because if shipping is big money I can pick it up in person, but I'm sure I'd have to pay sales tax. Thanks!

Andy

Quote on an RDB-050 with 1.75" die (240 degree?) please!

Shipped to 60014 but I'd like to see it itemized because if shipping is big money I can pick it up in person, but I'm sure I'd have to pay sales tax. Thanks!

Andy

PM sent!

Can i get a price on bender with 1 3/4 dies to 74434
Thanks great looking product was looking into the jd2 benders but this makes them look like kids toys.
Thanks
adam

Can i get a price on bender with 1 3/4 dies to 74434
Thanks great looking product was looking into the jd2 benders but this makes them look like kids toys.
Thanks
adamRDB-050 is beef. Took two of us to place it on the stand.
Degree wheel weighs more than my buddies complete bender..

Bender and 1.75 die to 89012

RDB-050 setup
1-5/8" Round Tube, 6" CLR, 90 Degree Die Set
or
1-3/4" Round Tube, 6" CLR, 90 Degree Die Set
Bend-tech PRO

Ship to 85140

Yes i would like to inquire how much would it cost for bender and two dies sizes 1-1/2 0.65 /5.5 clr /180 and 1-1/2 - 0.95 /5.5 clr 90

:Yes i like to know how much would it cost for bender with pedestal and two dies sizes 1 1/2 5.5 clr 180 and 1 1/2 5.5 clr 90)

quote for 95472

quot eme 1.5 die and bender to 30815
pat

RDB-050 is beef. Took two of us to place it on the stand.
Degree wheel weighs more than my buddies complete bender..

Thanks Terry!

Lets see some pics!

Can i get a price on bender with 1 3/4 dies to 74434
Thanks great looking product was looking into the jd2 benders but this makes them look like kids toys.
Thanks
adam

PM sent!

Thanks

best price shipped to 28277

bender and 1 1/4 die and 1 3/4 die shipped to 71260

Could I get a quote for 1.75 die and bender to Mass 01453

quote for 1.75 die and bender to 91901

quote for 1 3/4" die set and bender to 95628

can i get a quote for bender and 1", 1.25", 1.5", 1.75", 2" dies (die prices listed plz not sure if ill need all of em but if price is right i want em all. can it do square tube? if so dies for that.

Bender and 1.75 die to 89012


PM sent

Can I qet a quote on a bender and 1.75 die to 97045

RDB-050 setup
1-5/8" Round Tube, 6" CLR, 90 Degree Die Set
or
1-3/4" Round Tube, 6" CLR, 90 Degree Die Set
Bend-tech PRO

Ship to 85140


PM sent!

Yes i would like to inquire how much would it cost for bender and two dies sizes 1-1/2 0.65 /5.5 clr /180 and 1-1/2 - 0.95 /5.5 clr 90

sent you a PM!

I'd like to get a quote on an RDB-050 as well as an RDB-125 for comparison. thanks

price on bender and 1 1/2" die shipped to 12078

Price on bender, the RDB-050. and 1 3/4", 1 1/2", and 1" round dies shipped to business 73040 please

can i get a price to 62439 thanks

quote for bender and 1 3/4" die shipped to 06883
thanks

quote for 1.75 die and bender to 91901

PM sent

Thanks!

quote on a

RDB-050 bender


DS-180-1500T-R600 1-1/2" Round Tube, 6" CLR
DS-180-1750T-R600 1-3/4" Round Tube, 6" CLR,
DS-180-1750T-R700 1-3/4" Round Tube, 7" CLR

Tube Notcher - TN-200H



shipped 07080 commercial

quote for 1 3/4" die set and bender to 95628

PM sent, thanks!

Price on
BB-2416E
BB-3616E
BB-4816E

can i get a quote for bender and 1", 1.25", 1.5", 1.75", 2" dies (die prices listed plz not sure if ill need all of em but if price is right i want em all. can it do square tube? if so dies for that.

PM sent!

Thanks

can i get a qoute on a bender, 1", 1.5", and 1.75" inch dies. with a bread down of die prices please :D

I'd like to get a quote on an RDB-050 as well as an RDB-125 for comparison. thanks

PM sent!

price on bender and 1 1/2" die shipped to 12078

PM sent, thanks!

price for bender,1.75 die shipped to 45833

Price on RDB-050 Bender and Dies 1.25 ,1.5 ,1.75 in 180 degree to 40505 business address break out pricing if you could on bender/dies

Thanks Thomas

Can I get a quote for the bender and 1 3/4 die shipped to 77905
Thanks!

Curious on pricing. I'm looking at the JD2 Model 3, or Model 32 manual.

Would be interested in the RDB-050, with a 1" die. Possibly a 1.5" and 2" if they're cheap enough.

Shipped to 61360 please.

I have relatives in Monroe, WI (zip 53566), so I may ship it there if it's significantly cheaper, or even have them pick it up for me if that's an option.

Thanks in advance for the info.

-Tim

PM sent!

Thanks

quote for rbd-50 with a 1 5/8" 180 deg die to 49344 please.

rbd-050 with a 1.75 die shipped to 86314

Thanks

Could I get a quote for a RBD-050 bender shipped to 98033 please. Also a separate quote for a 1.75 die please. Thank you.

quote for bender and 1 3/4 die to 72023 thanks

Price quote on a bender and one 1.75" die to 75670

thanks

quote for bender and 1 3/4" die shipped to 80123
thanks

Price on
BB-2416E
BB-3616E
BB-4816E

PM sent, thanks!

Can I get a quote for the 1", 1.5", 1.75 dies sent to 33619

Thanks

PM sent, thanks!

PM sent

Christmas time! Quote for the bender to 85242 with one 1 3/4" die and one 1 1/4" die both 180

Quote for RBD-050 bender and 1 3/4" and 1 1/2" die shipped to 35043 please. If you would break out die costs. Thank you.

Bender + 1 5/8" 180 to 61341
let me know how much extra shipping cost. Mite just come pick one up from ya

Thanks

PM sent

Can I get a quote for the bender and the 180 degree 1.75 die to 64089. Thanks

Quote for RBD-050 bender and 1 1/2" and 2" 180 degree die shipped to 98592 please. Thank you.

Pm sent!

Quote on bender with 2 inch die and 1 1/2 die extra to 45419

Thanks

quote on bender, 1 5/8 180 die shipping to 60517 depending on shipping i may just pick it up

Quote on BB-2416E 24" brake to 68803

Thanks

need a quote on a bender and set of dies 1'', 1.50'', 1.75'' and 2'' od pipe sizes. shipped to 97838. and what's the wait time thanks

shiped to 73801,thanks

Bender + 1 3/4" dies to 75474

Pm sent

Thanks!

Sorry I need/want a tube bender and I like the looks of this one but I am not sure what to ask for in a die set. I will be making rollcage out of either 1.75" or 2" tubing, but still not sure if that is the best choice. it is for a full size truck and I am doing it for safety, not looks. Any advice?

Thanks:D

Sorry I need/want a tube bender and I like the looks of this one but I am not sure what to ask for in a die set. I will be making rollcage out of either 1.75" or 2" tubing, but still not sure if that is the best choice. it is for a full size truck and I am doing it for safety, not looks. Any advice?

Thanks:D

Pm sent!

Quote for RBD-050 bender, 1, 1 1/2" and 2" 180 degree die (separately) shipped to 88008. Thank you.

Please quote me a price for a bender, 1",1 1/2" and 2' die also, but to 89130

Quote for RBD-050 bender and 1 3/4" and 1 1/2" dies to 68134 and without shipping. Also, quote for the horiz/vert bandsaw...the cheap one

thanks,John

Sorry, I lost the quote you gave me a bit ago when I cleaned out my PM box.


Quote on RDB-050 bender, no handle or stand.

DS-180-1000T-R300 1" Round Tube, 3" CLR, 180 Degree Die Set for RDB-050

DS-180-1250T-R400 1-1/4" Round Tube, 4" CLR, 180 Degree Die Set for RDB-050

DS-180-1500T-R500 1-1/2" Round Tube, 5" CLR, 180 Degree Die Set for RDB-050

DS-180-1750T-R600 1-3/4" Round Tube, 6" CLR, 180 Degree Die Set for RDB-050


Shipping to 97133

Business shipping cheaper to 97020?

Thanks again...

PM sent!

1.75 die and this to 45030 please

Could I get a quote on the Bender and a 1.75" Die 180% shipping to 46220

Thanks

PM sent

Can I get a quote for the bender and 1 3/4 die shipped to 29678? Thanks!

quote for bender and 1.50 die to 18702

Can I get a quote on the bender and 1.5/4.5/240 die to 99320.

Thanks

Hey can i get a quote for the Bender and a 1 3/4 6.0 clr 180* die shipped to 95124 please thanks!

Can a get a quote on a bender and 1-3/4" 6" clr 180* die shipped to 06320?? Thanks

Can I get a quote for the bender and 1 3/4 die shipped to 29678? Thanks!

PM sent, thanks!

quote on bender with 1 3/4 die to 84780 , thanks!

I wanted to say great bender! Bends the tube nice and easy and the setup was pretty straight forward! Definitely reccomend it to everybody!
http://i448.photobucket.com/albums/qq207/2003_ram/P2130065.jpg

I wanted to say great bender! Bends the tube nice and easy and the setup was pretty straight forward! Definitely reccomend it to everybody!
http://i448.photobucket.com/albums/qq207/2003_ram/P2130065.jpg


sweet, thanks!

can i get a price quote on this bender with a 2'' die set to 58203 also can i get priceing on the full die set for this machine? thanks

can i also get a price on this bender with 1 5/8 die i will need stand and handle complete... shipped to 29526 commercial thanks Budd

quote on bender with 1 3/4 die to 84780 , thanks!


PM sent!

Thanks!

quote on bender with 1 3/4 die to 27017, thanks

Can I get a quote on one with 1.75" Die and a 1.5" Square Die shipped to 77063

quote for bender, 1.75 die shipped to 59644

Can I get a quote on the RDB -050 w/ 1.75 and 2" to 76015 thanks.

pm sent

quote on bender with 1 3/4 die shipped to 95667 thx Rob

PM sent, thanks!

1.75 die and bender shipped to 92506

1.75 die and bender shipped to 92506

PM sent




Thanks!

quote on bender, 1.75" die, 6" clr/180 deg. shipped to 12873
thanks

Can I get a quote on one with 1.75" Die and a 1.5" Square Die shipped to 77063


PM sent

quote on bender with 1 3/4 die shipped to 95667 thx Rob


PM sent

Bender and 1.75 dye please and pronto

PM sent!

can i get a quote with 1.75 dies shipped to 84074