|
250jon 03-23-2009, 01:12 PM i can get my hands on a ford dana 60 for very cheap and i was just wondering what i would have to do to make it to single wheel b/c it is currently a dually i have a single wheel that i can use for parts. any help appreciated 82F100SWB 03-23-2009, 01:40 PM All you need is single rear wheel hubs, and you will be all set. What we need to know though, is what year is your F250? If it's a TTB(80-97 truck) and has a Dana 50 front, it's hubs will go right on the 60. Mr.N 03-23-2009, 03:36 PM Yep, need the year Dana 60 it is before we can answer. 250jon 03-23-2009, 07:16 PM i have a 1996 f250 i took the ttb out and installed a ball joint 60 from a 1994 f350. now i want high steer and don't want to buy knuckles for my ball joint 60 that allow it. there for i found a dually 60 with king pins out of a 1989 f350 and want to know how i would go about changing it to single wheel mj 03-24-2009, 05:46 PM I think it is just hubs and rotors got one here that a previous owner switched to srw 82F100SWB 03-24-2009, 06:18 PM The hubs and rotors from your balljoint 60 will swap over without a problem. 94stepsideford 03-25-2009, 12:41 PM The hubs and rotors from your balljoint 60 will swap over without a problem. Or if you want to keep that one complete to sell it the big hub 250 ttb hub and rotors will work. Thats what I used on mine Antiqueford 03-27-2009, 05:53 PM Don't change the hubs out. Give yourself a little wider track. :D | |