bigjeepinYJ
08-30-2002, 08:56 AM
Has anyone here used the conversion fittings in their power steering box to change to 6 AN Aluminum or stainless fitting and braided hose? I am getting ready to install a PS Cooler and the cooler that I have has the 6AN fittings. I saw that in Jegs there were conversion fitting for the power steering box. The size they have is 16 MM X 1.5. Will this work?
Also the Boxes on YJ's are the O-ring style correct? I have had mine off a million times cant remember.
Scout Dude
08-30-2002, 09:14 AM
Yep, they are o-ring style. One is larger than the other. I bought my coversion fittings from AFCO racing (Didn't know Summit sold them:( ) and I just bought one of each size of the o-ring style (I confirmed what to get with one of their dudes)
hth,
sd
bigjeepinYJ
08-30-2002, 09:18 AM
Wich side do you run the through the cooler? Pressure/ Return?
Aggro
08-30-2002, 09:28 AM
Originally posted by bigjeepinYJ
Wich side do you run the through the cooler? Pressure/ Return?
definitely return.
bigjeepinYJ
08-30-2002, 09:38 AM
Originally posted by Aggro
definitely return.
Just wanted to make sure.
bigjeepinYJ
08-30-2002, 11:59 AM
Originally posted by Scout Dude
Yep, they are o-ring style. One is larger than the other. I bought my coversion fittings from AFCO racing (Didn't know Summit sold them:( ) and I just bought one of each size of the o-ring style (I confirmed what to get with one of their dudes)
hth,
sd
How the hell do you get ahold of them. I cant find a number on that webpage anywhere. I e-mailed this morning no answer?
bigjeepinYJ
08-30-2002, 12:04 PM
Found it. Man I dont think that they want people to call them.....
TNScrambler
08-30-2002, 10:26 PM
ok, call me stupid or whatever, but I'm just wandering what you need fittings for to put a cooler on? The transmission cooler that I bought used hose clamps for the hoses and I just ran it off the existing return line then a new hose on back to the pump.
Justin
bigjeepinYJ
08-31-2002, 12:25 AM
Originally posted by TNScrambler
ok, call me stupid or whatever, but I'm just wandering what you need fittings for to put a cooler on? The transmission cooler that I bought used hose clamps for the hoses and I just ran it off the existing return line then a new hose on back to the pump.
Justin
Read above. I am changing my pump and line to AN fitting. Also the cooler that I have uses 6 AN fittings.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
NEWBIE Read the Fawkin Post:flipoff2:(Stupid)