|
CHOKEu 08-30-2002, 02:01 PM O.K... I smashed the pan pretty good. It still has normal oil pressure. I changed the oil and put in the 6 quarts needed. My question is, now that the capacity is less; do I still use 6 quarts or less oil till it reads level on the stick??? Right now on the stick it is above the full line. KEVIN pkhart 08-30-2002, 02:21 PM use less or you will foam up your oil and over heat Chris Geiger 08-30-2002, 02:23 PM Fix it right. Change or repair the pan! CHOKEu 08-30-2002, 02:40 PM Originally posted by Chris Geiger Fix it right. Change or repair the pan! That will be the next step... I gotta run it the way it is for now though. Doc Johnson 08-30-2002, 02:41 PM It is hard to tell how bad the damage is. I say leave it alone. Fill it untill the dipstick says full. CHOKEu 08-30-2002, 03:15 PM Originally posted by Doc Johnson It is hard to tell how bad the damage is. I say leave it alone. Fill it untill the dipstick says full. ya, it's about .500 over the full line... I'm going to make it about level or a hair above... DAMN rocks- glad I got a skid on it now after the fact!:D TDW 08-30-2002, 04:47 PM Originally posted by CHOKEu glad I got a skid on it now after the fact!:D HAHA goes right along with the OBW sitting on my garage floor. :D fatkid 08-30-2002, 04:50 PM I'd run it with out an oilpan, just my .02:) RE:Todd 08-30-2002, 06:55 PM Originally posted by fatkid I'd run it with out an oilpan, just my .02:) Get one of those spring back oilpans :D :D . Chris Geiger 08-30-2002, 08:18 PM Originally posted by fatkid I'd run it with out an oilpan, just my .02:) I have been wondering how you get your rig so light! | |