|
IronBenderII 08-31-2002, 12:18 AM Getting ready to do the partial tube thing and narrowing of my EB. I'm planning where to run the tube and can't figure out what to do where the tube goes through the floor. I don't want to leave a hole there. Is there a company that makes custom gromets or something? I've seen some people even weld to the body. I don't know how good an idea that is. Pics! -Jack elf_cruiser 08-31-2002, 12:23 AM 1 word... "sandwich" Welding tube to the body?? That sounds smart...:rolleyes: fatkid 08-31-2002, 02:06 AM Sandwich is a good way to do body tie in to the frame... IronBenderII 08-31-2002, 08:45 AM Okay, so do you guys use rubber or ? between the plates in the frame and the body? Where do you get it? fatkid 08-31-2002, 10:35 AM I used a bushing style set up to help isolate vibrations on a rig, However just a sandwich plate will work fine. We have a supply of old industrial rubber belts that we use as gasket material. You could use some old floor matts if you had them also. IronBenderII 09-01-2002, 11:37 AM SWEET! I just scored a couple of pieces of rubber stock from Grandpa's this weekend. It should work great between the sandwhich plates. Thanks guys for the info! -Jack | |