Jeep ZJ bumpers.

3/16" steel construction

1/4" mounts.

Bumper comes unpainted, and the welds are ground.

Hardware and unibody sandwich plates included.

Minor trimming to unibody 'holes' necessary.

Tig welded clevis mounts.

Winch bumper $575 shipped in the lower 48 States.

Regular Bumper $525 shipped in the lower 48.

Customization available. I've done skid plates, tubes and light holes.

Email, Post, PM or call with questions, comments.

http://i78.photobucket.com/albums/j118/jamscal/Cars/IMG_2698.jpg

http://i78.photobucket.com/albums/j118/jamscal/Cars/IMG_2866.jpg
http://i78.photobucket.com/albums/j118/jamscal/Cars/IMG_2867.jpg
http://i78.photobucket.com/albums/j118/jamscal/Cars/IMG_2869.jpg

More pics avilable.


Thanks.

I can't find my finished pic, but here is an in-progress pic of a Grand Cherokee winch bumper with skid plate and light holes.

http://i78.photobucket.com/albums/j118/jamscal/IMG_3387.jpg

Skid is $75 with bumper purchase. It bolts to the bumper and stock radiator support. 3/16" construction and 7 slots.

Light holes were made for certain lights. Call or PM for price

I also make just a winch mount for ZJs. You can cut the stock plastic bumper to clear it or use it as a base to make your own bumper. It's $299 shipped and I'll post pics later.

Thanks

Latest customer pics: I made the rear too.:D
http://i78.photobucket.com/albums/j118/jamscal/59Jeep5-15-09011.jpg
http://i78.photobucket.com/albums/j118/jamscal/59Jeep5-15-09001.jpg
http://i78.photobucket.com/albums/j118/jamscal/59Jeep5-15-09004.jpg
http://i78.photobucket.com/albums/j118/jamscal/59Jeep5-15-09006.jpg

How heavy would you say your regular bumper with all the mounting hardware is?


-G-

How heavy would you say your regular bumper with all the mounting hardware is?


-G-

It's been awhile since I've weighed one but I think about 55-60 lbs for the regular bumper and 65 for the winch bumper.

What would it cost for front and rear shipped to 87108? I see the front but my buddy is lookin for both Thanks

PM Sent.

Thanks.

pm'd you!

What would the cost be for a front winch bumper and rear bumper for a ZJ shipped to 75063?

PM'ed.

Thanks!

This is a bit custom. It's the same basic shape as my regular bumpers.

Some unibody cutting was done to get it a little higher and tighter.

It also bolts to the stock lower rad support, (which will be modified to gain additional clearance.)

I am hoping to build future bumpers with a similar integral skid plate, and can build another like this or even tighter depending on how much unibody you want to cut.


http://i78.photobucket.com/albums/j118/jamscal/IMG_3773.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_3774.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_3775.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_3776.jpg

that rear bumper on the silver grand is BEAUTIFUL.. VERY nice work

What would the price be for a rear bumper shipped to 95008?

Thanks,
Fred R.

heinie:

Thanks!

Fred R:

PM is coming.

how much for the front high clerance wincher to 97070?

how much for the front high clerance wincher to 97070?

PM sent.

pm me a price for that rear bumper please...

i would be interested in the complete bumper ... or maybe a kit that has all of the pieces that i can weld togethor myself

great looking bumper

i need some cage work done i was looking for a local fab do you do cages?

Rear Bumper is $600 plus shipping from 40213. Options include integral hitch and customization based on your needs.

Pictured bumper is missing the clevis mounts, which are included in price.

3/16 construction.

About as tight to the unibody as possible w/o cutting.

Last pic is two front bumpers I've been building. Top one has light holes and frenched plate recess.

http://i78.photobucket.com/albums/j118/jamscal/IMG_4067.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_4066.jpg



http://i78.photobucket.com/albums/j118/jamscal/IMG_4069.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_4064.jpg

Hey man. you build very awesome bumpers. I may be contacting you soon to build a rear bumper for my old 5.9 that I am buying back soon, pictured below. How much would you charge for the rear bumper on the silver 5.9 up above, with a tire carrier added on?

http://i169.photobucket.com/albums/u224/RockZJ/100_1683.jpg

PM sent.

Nice Jeep.

Do you offer free pickup?

Do you offer free pickup?

Yes, I do.

PM sent.

Nice Jeep.

I received your PM, thanks for the compliments. I should have the Jeep back by the end of February. Ill be making a trip to Moab this spring, so I will want to have the bumper on by that time. I will get ahold of you once I have the Jeep again and am ready to make the trip down to L-ville. Id like to have the bumper made on my Jeep if possible, that way it fits perfectly. Im still a novice to welding, or I would attempt it myself :laughing: I cant imagine what kind of steel jungle gym I would create. lol. Ill be entering the Jeep in shows and such, so Im wanting it to be as nice as possible, hints me paying someone to build it :smokin:

PM. Some prices on a front winch bumper and a rear bumper like the last one in this post for a 94 ZJ shipped to knoxville TN 37931. Nice work by the way.

PM Sent.

Latest customer pic.

I can do tubework and ship it to you unwelded. (It would be $$$ to ship one like this.)

I'm building two right now with integral skid similar to the red ZJ a few posts up, and will get pics of those asap.

Thanks for looking.

http://i78.photobucket.com/albums/j118/jamscal/IMG00002-20100320-1624.jpg

How much for the one above for a 95 ZJ shipped to 83404?

would you be able to ship a rear bumper kit? shipping to canada would kill me otherwise. what kind of price am i looking at to ship to toronto?

would you be able to ship a rear bumper kit? shipping to canada would kill me otherwise. what kind of price am i looking at to ship to toronto?


I can't do a kit.

I've shipped several bumpers to a place just across the border in the US where Canadian buyers picked them up. Might be something to look into. Probably $75 to ship a rear to somewhere like that in NY.

Haven't shipped a rear into Canada in awhile but the last two front bumpers were $135 IIRC.

Thanks.

Not to dig up an old post but wondering if you still make these bumpers and if u make a swing-out rear tire carrier with dual gerry can holders?

Not to dig up an old post but wondering if you still make these bumpers and if u make a swing-out rear tire carrier with dual gerry can holders?

Email sent.

I can do it.

Bumpers look awesome! On the front bumper, what are the demensions of the winch mounting area and the flat part on the front? It almost looks like its 1 3/4" but im not sure. Thanks!

Bumpers look awesome! On the front bumper, what are the demensions of the winch mounting area and the flat part on the front? It almost looks like its 1 3/4" but im not sure. Thanks!

Thanks!

Winch mounting area is approx. 7"x32".

There is a 2" strip along the front of the bumper.

-James

Thanks man, I appreciate it! I'm a senior in high school and I need to do a senior project in order to graduate. I decided to build a bumper for my Grand Cherokee and I absolutely loved your design and your work! I was hoping to build a bumper similar to yours.

Could you help me with some ideas on the bumper or even some demensions of your bumper with me? Thanks man.

i have trimmed fenders on my zj do you make these in a jig or can you make me one so it meets the fender trim i have i can provide pics. Price shipped for front winch to 28545 if you can thanks for your time

i have trimmed fenders on my zj do you make these in a jig or can you make me one so it meets the fender trim i have i can provide pics. Price shipped for front winch to 28545 if you can thanks for your time

I can make it so the ends of the bumper are shorter. I've done one before for a guy who cut his fenders up to the 'accent line' above the stock openings.

$575 shipped, just send the pics when you order.





1997V8ZJ:

The best way to build a first bumper is to mock it up with cardboard and tape until you get the look you want.

Then use those cardboard pieces as templates for your steel.

Cut, weld and start grinding.

Thanks,

James

Thanks Jamscal, greatly appreciate it! Your bumpers are the best I've seen.

How about a rear with a swing away that will hold a 37 and highlift.93 grand.

How about a rear with a swing away that will hold a 37 and highlift.93 grand.

I can do it. PM or call to discuss.

Thanks.

I can make it so the ends of the bumper are shorter. I've done one before for a guy who cut his fenders up to the 'accent line' above the stock openings.

$575 shipped, just send the pics when you order.



Thanks,

James

thanks man i will get up with you when i have the funds ready do you do layaway lol

Looking for a front bumper with a hitch receiver and a rear with a hitch receiver and swing away tire carrier. Is that something you could do? Also wondering if you could do rock sliders. Thanks, heard nothing but good things about you and the work looks great

Looking for a front bumper with a hitch receiver and a rear with a hitch receiver and swing away tire carrier. Is that something you could do? Also wondering if you could do rock sliders. Thanks, heard nothing but good things about you and the work looks great

I can do it. Front bumper will probably be the same price as the winch bumper.

I'll make rock sliders for $285 in 2x3 rectangle tubing, slash cut ends.

PM me and we can discuss pricing for a package deal + other details.

Thanks,

-James

do you do layaway lol

I actually have taken payments on several bumpers...just like layaway.

I start making the bumper when it's almost paid off and it's ready to ship when I get the final payment.

Works for me.

I don't want to be Kmart and keep track of $50 a month for a year or anything, but if you need to spread out $600 over two or three months that's fine.

Thanks,

James

Hey do you have any pics of just the winch mounts with the stock bumper on the car.

Hey do you have any pics of just the winch mounts with the stock bumper on the car.

Is this what you mean?

http://www.pirate4x4.com/forum/showthread.php?t=757359&highlight=rlc

I haven't made one in awhile, but it's not a problem.

Thanks,

James

I get a lot of questions about how these mount to the vehicle, so I'll put up a few pics and info.

Step One: Remove old bumper cover.

Step Two: Remove factory tow hooks. Actually it's possible to keep these but the factory nutplates must be removed. It's a pretty heavy support system and ties into the lower rad support, so keep it if you can.

Step Three: Clearance unibody holes (pictured) to the outside. The bumper will slide in and bolt up to the factory tow hook holes (4 per side).

Step 4 insert bumper, install hardware, line up and tighten down.



I have some mounts pictured, which will of course be a part of the bumper when you get them.

I also have a pic of the already clearanced hole as well as a build occuring on the vehicle.

Let me know if there are any questions.

http://i78.photobucket.com/albums/j118/jamscal/IMG_3727-1.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_4037.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_3422.jpg


http://i78.photobucket.com/albums/j118/jamscal/IMG_4014.jpg

The winch mount looks really good is the anything special you have to do to mount it?

The winch mount looks really good is the anything special you have to do to mount it?

Thanks.

Just cut the unibody holes like in the above pics. It mounts just like my bumpers.

It's up to you to cut the plastic bumper cover to fit.

The winch mount also will be a great start to a homebrew bumper somewhere down the road, if you want to go that route.

pm me if u do will and can sell me the bumper mounting brackets and how much for them?

pm me if u do will and can sell me the bumper mounting brackets and how much for them?

I can and I'm thinking $55 for the mounts, grade 8 hardware and 11 ga sandwich plates shipped to your door.

Thanks,

James

look forward to getting mine!......

front(winch) and rear price shipped to 46947
95 Grand Cherokee

front(winch) and rear price shipped to 46947
95 Grand Cherokee


PM Sent.


Thanks.

How much for a front winch, a stinger hoop and a rear with a tire carrier to 74750? It's a 94 Grand Cherokee

Any chance your getting into doing WJ's?? That front ZJ bumper has GOT to be one of the CLEANEST bumpers I have seen in a while!

Any chance your getting into doing WJ's?? That front ZJ bumper has GOT to be one of the CLEANEST bumpers I have seen in a while!

Thanks!

It's on the to-do list. I just need a local WJ to build from.

-James

Here is a rear with "the works":D

Tire carrier is a TJ unit from Body Armor modded to fit.

Rear lights, hitch, widened sides, and trimmed fender openings are all options.

http://i78.photobucket.com/albums/j118/jamscal/IMG_5867.jpg

James,

Here is a photo of mine installed, I still need to get up with you and discuss a rear!

http://i94.photobucket.com/albums/l116/HoodRichxXx/7b2491d6.jpg

Great pic, thanks!

how much for a front winch bumper and rear shipped to 21740?????

Your making some damn beautiful bumpers better than any I have seen yet and Ive been looking for quite some time!

I would like a winch bumper with skid plate shipped to 67154.

I would also like a rear bumper but will have to buy them at separate times so could you also give me a price shipped to the same on that also. On the rear bumper I also have the receiver hitch will this clear it? Im also interested in a gas tank skid plate if you are into making them? Do the front and rear bumpers come with the D-rings?

Thanks
Jim

http://i134.photobucket.com/albums/q107/salvagedpleasure/1995%20Jeep%20Grand%20Cherokee/278675_2299539046566_1191860963_3797685_5256231_o. jpg

Also do you have any photos of your side rock sliders? Im very interested in that also....

Thanks
Jim

Your making some damn beautiful bumpers better than any I have seen yet and Ive been looking for quite some time!

I would like a winch bumper with skid plate shipped to 67154.

I would also like a rear bumper but will have to buy them at separate times so could you also give me a price shipped to the same on that also. On the rear bumper I also have the receiver hitch will this clear it? Im also interested in a gas tank skid plate if you are into making them? Do the front and rear bumpers come with the D-rings?

Thanks
Jim

Thanks, $575 shipped for the front. Add $75 for the skid plate.

Rear bumper is $600 plus shipping, which will be at least $100. Bumper will clear the factory receiver.

I can make a gas tank skid or beef up a factory skid. I have at least one laying around.

D-ring/clevis mounts are included on all bumpers (but not the actual clevises).

I've made a few sets of sliders but I don't know if I have any installed pics. I can do any size rectangle tube to any length, slash cut the ends, add steps, etc.

I sort of liked these zj sliders with 1/4" plate steps:


http://i78.photobucket.com/albums/j118/jamscal/IMG_5817.jpg

http://i78.photobucket.com/albums/j118/jamscal/IMG_5805.jpg

PMs have been sent/replied to for other quotes.

Thanks,

James

Awesome that's exactly what I want slider wise and I've yet to see any with steps that's what the wife was bitching about last night in fact that she has no step to get up into the jeep!!!!

Do you use paypal if so what's your info brother?

Thanks
Jim

Awesome that's exactly what I want slider wise and I've yet to see any with steps that's what the wife was bitching about last night in fact that she has no step to get up into the jeep!!!!

Do you use paypal if so what's your info brother?

Thanks
Jim


Thanks,

paypal goes to my email:


jamscal @ att DOT net

Email me to discuss further, I can't PM you for some reason.

Thanks,

paypal goes to my email:


jamscal @ att DOT net

Email me to discuss further, I can't PM you for some reason.

Ill go check my settings maybe i have something messed up....

Thanks
Jim

Pm sent!

Price for front non winch with skid, and frenched plate, and light holes. Shipped to 55811.

PM sent.

ok...I have taken some time to rethink my grand and I have desided I like this bumper below....I had this on my old XJ and foolishly sold the rig. I would love to see if you could recreate it using zj demensions... here is a couple pics:

http://i297.photobucket.com/albums/mm215/tsanders1977/IMG00096-20100316-1803-1.jpg
http://i297.photobucket.com/albums/mm215/tsanders1977/26492_113701738649812_100000299599776_190254_24181 02_n.jpg
http://i297.photobucket.com/albums/mm215/tsanders1977/790-1.jpg
http://i297.photobucket.com/albums/mm215/tsanders1977/IMG00097-20100316-1804-1.jpg
http://i297.photobucket.com/albums/mm215/tsanders1977/ksrocks%20dec%2009/1212091158.jpg
http://i297.photobucket.com/albums/mm215/tsanders1977/ksrocks%20dec%2009/downsized_1212091112.jpg

obviously I would want it to tie in at radiator or some sort of skid as your bumper do. and I can weldstinger bars on after they shipp to cut down on cost....and the light tabs are not needed as well as the little hooks between the clevis points and winch mount. what do ya think? something you will do? how about an estiate on cost difference? thnks

Interested in front brackets for 93 grand, shipped to 75840. Would love a front DIY kit.

PM sent.

I can sell the mounts separately as well as a u-weld kit (not so much a kit as a bunch of panels.

Thanks!

hey i need some brackets and the d ring tabs can you send me some?