: more labor day weekend carnage
Lance 09-02-2002, 09:55 PM So it looks like the carnage Gods struck down upon a few of us this weekend... Here is my contribution - a broken CTM: :eek:
http://www.pirate4x4.com/forum/uploads/104-0419_IMG.JPG
And just for shits-n-giggles, here is my carnage from last weekend:
http://www.pirate4x4.com/forum/uploads/104-0420_IMG.JPG
Both victims were on the front passenger side. The splines on the Warn shaft are also twisted inner and outer. :flipoff2:
Now for those of you that don't know me and/or haven't wheeled with me, these joints and shafts have taken some insane punishment. I still swear by CTMs! :p
Good God!!:eek: Not to bad for a poser:flipoff2: :D
The Jerk 09-02-2002, 10:00 PM nice work. indeed was a weekend for broken crap. jiMMy
Kurtastrophe 09-02-2002, 10:02 PM Time to test the WARN life-time warranty?:D
Chris Geiger 09-02-2002, 10:07 PM What trail? What were you doing at the time of failure?
Wow!
Lance 09-02-2002, 10:10 PM Originally posted by Chris Geiger
What were you doing at the time of failure?
Getting it.
:flipoff2:
Lance 09-02-2002, 10:20 PM Originally posted by Chris Geiger
What trail? What were you doing at the time of failure?
Wow!
Ok, the hub blew up in Little Sluice. I wasn't really doing much when it let loose. I think it was already cracked from earlier hard wheelin....
The CTM broke yesterday up on Fordyce. Again, I think it may have been weakend from earlier hard driving. But when it let loose I had the wheels cranked all the way to the left, and was attempting to climb a ledge. I was going up this when it broke:
http://www.pirate4x4.com/forum/uploads/104-0409_IMG.JPG
Lance 09-02-2002, 10:34 PM Originally posted by JR
What size tire?
38.5 SX
I see you have one of his forged ones. I've been wondering if they are as strong as his earlier billet proto types. Has anyone broken one of the earlier ones?
mrblaine 09-02-2002, 11:24 PM Originally posted by JR
I see you have one of his forged ones. I've been wondering if they are as strong as his earlier billet proto types. Has anyone broken one of the earlier ones?
No billet ones have been broken to date.
Blue-Beard 09-03-2002, 12:58 AM get it!:cool:
bigdude 09-03-2002, 05:52 AM Lighten the load a little and you won't break so much stuff :flipoff2: GET IT!
morpheus 09-03-2002, 06:13 AM the buggy is looking sweet lance! You had a chance to weigh it after the latest round of mods ?
- jack
bigdude 09-03-2002, 06:22 AM Originally posted by morpheus
You had a chance to weigh it after the latest round of mods ?
- jack
I wasn't talking about the buggies weight :laughing: :flipoff2:
Lance 09-03-2002, 08:05 AM Originally posted by morpheus
the buggy is looking sweet lance! You had a chance to weigh it after the latest round of mods ?
- jack
No I haven't. Hey bigdud, bite me! :flipoff2:
bigdude 09-03-2002, 08:08 AM Originally posted by Lance
bite me!
Most people on the east coast don't swing that way. I mean it's not like what you're used to out there in CA. Just an FYI ;)
:flipoff2:
morpheus 09-03-2002, 08:29 AM Originally posted by Lance
Hey bigdud ...
ahahaha ... good one Lance ! :D
- jack
tsm1mt 09-03-2002, 09:31 AM Hmm.. mine damage wasn't as spectacular, but might be more expensive. :D
http://www.m4x4a.org/ImageGallery/album51/DCP_0073.sized.jpg
http://www.m4x4a.org/ImageGallery/album51/DCP_0069.sized.jpg
Wasted the #7 rod bearing drag racing. :D
Then my buddy's Bronco went turtle during the baja race..
http://www.m4x4a.org/ImageGallery/album51/DCP_0076.thumb.jpg
http://www.m4x4a.org/ImageGallery/album51/DCP_0078.thumb.jpg
http://www.m4x4a.org/ImageGallery/album51/DCP_0080.thumb.jpg
Labor Day Rally (http://www.tmcom.com/~tsm1/scout/racing/labor_day_2002.htm)
welndmn 09-04-2002, 02:32 PM Hey Lance, have you caled that drivetrain place yet, and see if they offer the lifetime warry?
RP Films 09-04-2002, 10:31 PM Lance is that pic right above camp? On your way out to Fordyce lake?
http://www.pirate4x4.com/forum/uploads/104-0409_IMG.JPG [/B][/QUOTE]
Chris Geiger 09-04-2002, 10:47 PM Originally posted by Lance
Getting it.
:flipoff2:
Well I am glad someone was gitting some this weekend. All I got this weekend was a little wrenching time on mine :(
WheelingPiazza 09-05-2002, 06:41 AM Hahaha wrenching time, hahaha thats all I seem tobe doing these days..
SOA/Axle swap, Took it on its first run and blew the motor..
this is what it looked like this last weekend
http://www.jeepshots.com/shots/projects/tube/p1000544.jpg
Notice the two motors, on on the ground, one on the stand..
Look MOM, A bomb went off in my garage.
http://www.jeepshots.com/shots/projects/tube/p1000545.jpg
And while I was doing that, This was going on in the driveway
http://www.jeepshots.com/staytuned.jpg
nobody20 09-05-2002, 06:59 AM So what's under the cover?
welndmn 09-05-2002, 10:38 AM Originally posted by nobody20
So what's under the cover?
Nasvick
GearMan 09-05-2002, 02:29 PM Originally posted by mrblaine
No billet ones have been broken to date. Didnt H8 monday break a billit bullit
Lance 09-05-2002, 02:34 PM Originally posted by GearMan
Didnt H8 monday break a billit bullit
I don't think so. FYI I am getting version 2.0 super duper experimental CTMs to test out. We will see how they hold up.
|