: Looking for Motorcraft Carb


JeepManInNJ
09-03-2002, 09:41 AM
Anyone know hwere I can get a Motorcraft 2100 Carb? Looking to replace mine...any recommendations?

Sundowner
09-03-2002, 09:43 AM
go look at Cosmo's on Double Trouble road in Bayville (I think it's Bayville) they had a couple lying about last time I went 3 weeks ago.

sceep
09-03-2002, 12:00 PM
autozone, checker, shucks, cragen, napa. any parts store should have one.... say.. uhm.. 73 bronco 302?? theres a certain throttle body bore that you want though i cant remember it.

Maine Jeepah
09-03-2002, 12:30 PM
Got mine at auto zone.
Late 70's ford van with a 302. (Put on a 258)
Remanned with lifetime warranty...no problems last couple of years.


MJ
:D

extremetrails.com
09-03-2002, 05:54 PM
Try this place.
http://customrebuiltcarbs.com/index.shtml
I e-mailed them the other day about a 2100 and they said $120 for a rebuilt unit. It sounds like they would do good work, but I really couldn't tell you if they would or not. Later, Casey

"D"
09-03-2002, 09:25 PM
Try this.

I Bought a new one for my 73 cj5 to replace one that didnt pass emissions.

Its a dog. I had a ford buddy give me a 2bbl off of a 79 ford ranchero.

I dont now if its cfms or jets or what not, but that carb was the best thing I ever did to that engine.

I ran it for a while and loved it but it had a crack in the base plate form the previous owner and it ended up breaking the ear off of the mounting bracket.

So I had to pitch it since it wouldnt seal up against the intake.

So i got a new one for a 73 ford truck with a 302. Same thing with my first new one, it ran decent but it didnt have any power it seemed.

So my Buddy yanked another off of his parts 78 Chero.
geuss what. It ran like a striped ass ape.

Its probably right in thinking the bigger ford motors needed differant cfms or just bigger jets.

Either way the carbs from the rancheros seemed to out perform the smaller displacment carbs. If I knew about the internals of the two carbs I could tell you why it performed better.

Since I dont, I just give you the seat of the pants feel.
Since they have the same part #'s as the (real trucks and vans with 351's and 400's. I would pressume that all of the 351 and bigger motors use the same carb.

the 302's part# is differant.