This is the set up I used on a holden engine in my RR.

pump had to be lifted 40mm and moved back 25mm to clear steering box.

plate fits to end of head 3 bolts. pump bolts to this plate and a L shape plate welded to this mount plate to oick up mounting holes on other side pump. Use all 4 holes if you can.
Michael.
Pic not that clear.

Michael:

Looks you've beaten me to the finish line!

Did you do anything to compensate for the greater pressure generated by the Saginaw pump? How's the steering? Was there any noticeable change to the steering when you went Saginaw?

I hope to have the brackets finished this evening on mine. I dropped off the hoses last night and will have pretty braided stainless lines by 1630 hours this afternoon!

Paul

Mine not running yet still to complete wiring Holden ECU to RR almost.
But I know of another gut who has fitted same pump to his RR and experiences no problems to date.
Steering box seems to be holding up ok.
regards
Michael.

What's the spec on the box? Part #, pressures, etc.. Looks like I'm next!


Thanks.

Ali