GenRight Off Road
05-12-2009, 04:42 PM
This is a complete replacement roll cage kit for your Jeep Wrangler TJ (1997 - 2006). This is the BEST most protective cage we offer. All the tubes are cut to lenght and mitered to fit together (some triming may be required if your Jeep is not showroom perfect), you just need a welder to put it all together!
GRC-2001
http://www.genright.com/images/products/GRC2001a_MULTI_md.jpg
FEATURES:
* Designed for maximum visibility.
* Works with a factory hard or soft top.
* Works with hard of soft doors.
* Head room for back seat passengers!
* Made from heavy wall D.O.M. (Drawn Over Mandrel) seamless tubing.
* Includes all new Laser Cut and CNC formed heavy duty brackets to mount the cage in your Jeep.
* It also includes brackets and mounts to accept all the factory seat belts.
* Does NOT require cutting the dash.
* Kit can be shipped to you by UPS in three boxes.
* All the tubes are cut to size and mitered to fit together.
* Includes 3 grab handles, as pictured.
* Optional re-inforcement bars are available (at the dash and behind the seats) for more protection.
* Includes detailed installation instructions.
NOTES:
* This KIT requires complete removal of the stock roll bar (and most of the interior).
* The cage is sold un-painted, so it can be properly welded together.
* Requires a frame tie-in GRC-5500 for maximum roll over protection (sold seprately).
http://www.genright.com/ProductInfo.aspx?productid=GRC2001
GRC-2001
http://www.genright.com/images/products/GRC2001a_MULTI_md.jpg
FEATURES:
* Designed for maximum visibility.
* Works with a factory hard or soft top.
* Works with hard of soft doors.
* Head room for back seat passengers!
* Made from heavy wall D.O.M. (Drawn Over Mandrel) seamless tubing.
* Includes all new Laser Cut and CNC formed heavy duty brackets to mount the cage in your Jeep.
* It also includes brackets and mounts to accept all the factory seat belts.
* Does NOT require cutting the dash.
* Kit can be shipped to you by UPS in three boxes.
* All the tubes are cut to size and mitered to fit together.
* Includes 3 grab handles, as pictured.
* Optional re-inforcement bars are available (at the dash and behind the seats) for more protection.
* Includes detailed installation instructions.
NOTES:
* This KIT requires complete removal of the stock roll bar (and most of the interior).
* The cage is sold un-painted, so it can be properly welded together.
* Requires a frame tie-in GRC-5500 for maximum roll over protection (sold seprately).
http://www.genright.com/ProductInfo.aspx?productid=GRC2001