i have a 83 chevy. i was wondering how you guys did the 63" swap. did yall move the tanks? inboard your springs? i was also wondering if the center pin is 31.5"? i mean is it centered or not. im just getting ideas for yankin out them 56s and going to 63s. thanks

Look around. People have posted about this a few times.

I moved my all of my perches to keep the wheel in the same place and I put a fuel cell in the bed.

x2 on the fuel cell, get rid of the saddle tanks they tend to leak and break when wheeling, ive seen a few crack and split down at the hammers not something you want happening when on the trail.....? on the springs though most people inboard them and yes most chevy spring pad width is 31.5-32.5" depending on the axle and year it came out of... what do you exactly plan on doing with this truck? if you plan on crawling it inboard them if its a mall crawler dont bother.. just my .02

sand dunes and thats bout it. dd and weekend dune runner.i was askin what the distance from the spring eye to the center bolt was. sorry

i'm pretty sure it is 31.5 i have a k5 but i just did custom flip and lost of trimming on the quarter panel look at my build thread i think i have pics of the hangers

i'm pretty sure it is 31.5 i have a k5 but i just did custom flip and lost of trimming on the quarter panel look at my build thread i think i have pics of the hangers

x2

is there anyway to move the saddle tanks forward a few inches and just move the front hanger forward?im just lookin for ideas