|
hy_desert_4wheeler 09-05-2002, 08:21 PM I have a person interested in buying the gears from the D41 I pulled from my CJ2A.. He wants to put them in a D44.. I want to make sure they will; fit as he says before I sell them to him so I am not stuck refunding his money later if they dont fit..so my question is does anybody know if they will fit?? he wants to put them in this weekend but I do not want to let them go till I know for sure they will fit.. Jeepdude_Jay 09-05-2002, 08:49 PM I'm no expert. But just from looking at them the 41 parts are much thinner. Comparing a 5.38 from a 41 to a 5.38 from a 44. ZUK 09-05-2002, 09:52 PM http://www.offroaders.com/info/tech-corner/facts/axles/axlefacts.htm hy_desert_4wheeler 09-06-2002, 01:59 AM Originally posted by ZUK http://www.offroaders.com/info/tech-corner/facts/axles/axlefacts.htm Thanks ZUK if he shows back up I will show that to him.. Should prevent any more arguing from him and if it dont he gets them with a no return policy Grandpa Jeep 09-06-2002, 12:39 PM D41 Ring and Pinion is bigger than the D44. They won't fit. The only thing that really interchanges is the axle shafts. I have also heard that the spider gears interchange, but I'm not 100% sure on that either. 4Bangler 09-06-2002, 01:14 PM You can swap the side gears and axle shafts from a 44 into a 41, but that's about it. | |