Time to up-grade:D http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint.jpg?bc6xOo9AGtGA9hBT

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint2.jpg?bc6xOo9A.oWMOVWL

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint3.jpg?bc6xOo9AXv3bJQOE

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint4.jpg?bc6xOo9Ag2jQCMNq

HOLY U-JOINT BATMAN....
you would need a 10" dia shaft to run that thing!!!

That would go nicely with my wee little pinion:eek:

http://www.rightcoastcrawler.com/billaVista/Beefy_stuff/pinion2.jpg

hehe...WTF is that gear out of?

Man put it away,,,, that is almost pornographic......

Hey frank that's a 300$ u joint man let alone it would take a fairly large addapter to make it work hehe- that looks like 9c - or 53gwb - its catiplilar stuff- the splines are like 3" major large- no breaky! Jess:D

Frank: yoke lockup on an 1810 is at 7.547" and the lockup on yours is at 8.250"!!!

1350 is at 3.622"

1480 is 4.187"

fawking thing is literally twice as big as a dana 60 front axle u-joint!

The joint is a Precision 793. it was originally used in International Heavy Trucks from the mid 50's to the mid 90's. Nice Find Frank.:eek:

Brook

Edit: Dayum Jess! you knew it was a 9c Mechanics joint off the top of your head! not bad, not bad

LOL Jesse! And it was in the spare parts bend!!!!:eek:

The pinion turns the big fan on top of this 10 ton pig!

http://www.rightcoastcrawler.com/billaVista/Day_Job/Seaking1.jpg

Remember Brook, I gave you the part #. And the name:p Here are a couple more pics I went out a snapped.

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint5.jpg?bcBnRo9AzsiP9xnv
Check out how big the box is for it!


http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint6.jpg?bcBnRo9AoTLl3vtH
Sorry about the low quality of the picture. But, the cap is all most as big as a Dana 60 u-joint!

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint8.jpg?bcBnRo9AkXKB9pvX
That is a Dana 60 cap on top there! And yes it will fit inside the big ones cap with the bearings in it!

http://us.f1.yahoofs.com/users/aa67ba02/bc/My+Photos/newjoint9.jpg?bcBnRo9AnajL_6Oj
There is a pic with the 60 and the other one with the caps off.

No doubt Frank. I would have never been able to tell what that thing was without the part number. :p Jess is the man for knowing that shit off the top of his head. :eek:

Looks like it's for a Dana 600 :flipoff2:

Frank,
You would have to build a bigger Jeep, the last 9c driveline I built took Oddball and I both to move it around.