it is that time again cruiser heads for PMC,s swap meet in petaluma it will be held on sat july 11 food will be sold same bbq guy we had last year show and shine tee shirts and lots of outher goodies we will end the day with a raffel any ? post them here or call me any time 707 321 7960 Ron safreno i will be posting more info in a few days

Thanks for the heads up. I was just wondering when that was popping up:smokin:

Dug up some directions for those folks in need...

PMC Swap Meet July 11th, 2009
Holy Ghost Hall, Petaluma


Directions to the Holy Ghost Hall are:
Hwy 101 to the E. Washington off ramp in Petaluma. Head West (Left if going North, Right is going South) out E. Washington for 5 miles. E. Washington will turn into Bodega Ave. The address is 4699 Bodega Ave (on the left side).

I wonder if I should start my list of needs or my list of extra parts first.

PMC, were the heck is it on Vancouver ISLAND???????????:smokin::D

need parts post them here got parts post them here dont have any parts just show up and say hi

we will be giving out goody bags this year if any one wants to put a flyer or any thing at all post here or call me

ron safreno
707 321 7960
you can call any time thanks

who going

I'll be there selling:grinpimp: Hopefully with the 55:shaking:

post up what you need or want this great event only happens once a year

PMC, were the heck is it on Vancouver ISLAND???????????:smokin::D

they have a "link" for you at the airport! :laughing:

i'll be there for sure.


looking for some late model front doors, 75-84 fj40.


bringing a bunch of stuff, post up what you're looking for.

georg

I need one FJ45 rear cab mount clip. Not the latch, just one clip, for latches behind the seats.

I am looking for an absolute pristine, 100% intact heater for same 1966 FJ45. Mine has a leak...

looking for some late model front doors, 75-84 fj40.

More? You building a FJ40 based twenty door limo?:flipoff2:

I would be interested in any link suspension items especially if they were already fitted to a 40. Coilovers, links, ends, crossmembers, frame side mounts, that type of stuff. Also if by chance anyone has a stretched 40 tub ?

i'm gonna miss this again..... BUT i will be wheelin on the con though:flipoff2:
got a buddy comin from idaho .

Looking for some fj60-62 rear lift springs new or used,

I would be interested in any link suspension items especially if they were already fitted to a 40. Coilovers, links, ends, crossmembers, frame side mounts, that type of stuff. Also if by chance anyone has a stretched 40 tub ?

I have some of the ruffstuff "link" stuff. Let me see if I can dig up the part numbers. One was the frame side mounts.

i'm gonna miss this again..... BUT i will be wheelin on the con though:flipoff2:
got a buddy comin from idaho .

Hangin' with Tom too long, John?

Im gonna miss the swap meet as well. Heading to the con.

See you there Glenn. We'll be at the springs with Dirty Dozen crew.

i'm gonna miss this again..... BUT i will be wheelin on the con though:flipoff2:
got a buddy comin from idaho .

i'll be looking for ya mark:smokin:

prob be there, i have the stock running gear out of my '72.

PMC, were the heck is it on Vancouver ISLAND???????????:smokin::D


I will be near campbell River in July. We can have our own little swap. If it can be carried on my back or in a plane, it can make it to you. :D

its getting close got parts ready

prob be there, i have the stock running gear out of my '72.

What are you bringing ???

(and prices please :D )

I'll be there with a trailer full. Shop closed so i have alot of product to get rid of.

I'll be there with a trailer full. Shop closed so i have alot of product to get rid of.

Dibs on any FJ cruiser stuff... Lemme know ;)

I can't make it yet again, but if anyone has a frame/VIN/title for a 75 or earlier pre-smog FJ40, let me know.

Thanks.

I'm finally making the switch to fine spline birfs... anyone still running coarse splines and need spares ??? I accumulated a few spares along the way... some Warn hubs too (2 sets after the swap)

Dibs on any FJ cruiser stuff... Lemme know ;)

I have two lift kits coming prices TBD.

Workn to find a trailer to bring all this.... (it will be me, a 5 year old girl, almost 2 year old girl, neurotic dog, and a porta crib with a trailer :flipoff2: )

Everything is negotiable, more or less cheap and bartering is welcome.

Have PICS for a bunch of it... http://www.kodakgallery.com/ShareLan...localeid=en_US

FJ60/62 ------------------------------------------
FJ62 tool kit – believe its complete and in really good condition
Fj62 Rear and front sway bar- just the bars
‘87 FJ60 AC pump – a tad noisy
‘87 Stock FJ60 springs

FJ55 ’69 or ’70----------------------------
’69 or ’70 bezel w/blinker slots and bezel rings
’69 FJ55 stock rims w/rivets
Washer bottle – not sure if stock, motor works
Washer bottle – not sure if stock, no motor
Misc seat belts – blue and black
’70 Rear window setup with motor, crank, etc… all the trimmings (no glass)
Front and rear doors (fronts have wing)
Teq bottle jack + lug wrench and extension with the hook on the end
Teq bottle jack
Spare tire winch – mounts underneath and works… not rusted
Tranny hump, non-floor shift

Misc ---------------------------------------------
Engine:
- SBC350 used headers – long version
- Eldebrock carb 1609 (I believe) – run ~800 miles, purchased new, runs perfect
- Eldebrock carb – not sure what model, might need rebuild
- Quadrajet - 7042910 QH = 70 (before 1976), 42 = 1972, 9 = ???, 1 = 0, 1 and 2 are Chevy, 0 = Even numbers are automatic trans– most likely needs rebuild
- Holley – running when pulled apart
- QuickAir1 compressor (its not fast J but is quality) – missing one rubber foot
- Warn winch 6k – missing solenoid pack, free spool knob broken, has wire, no hook, with fairleadh
- Tires: 37/12.5/17r BFG A/T – some sidewall surface damage, all have great tread, ~4k miles - $450 (I know... expensive, right? New they are $298-TireRack and $323-AmericasTire = ~1,200 new)
- KC lights x2, old school ones, worked when pulled
- Roof Rack: Full length on a 60 (roughly 5x7), rust but not structural, bolt together, a little tweaked, mounts (x8) included, currently in pieces, partial hardware to put it together, black Rustoleum paint, width can be adjusted for mounting, no floor but has cross-bars

kids are welcome

1) complete pair of fj40 axles from a 1970 drum fr and rr $100
2) sm420 with adapter and 3spd case, bell housing, insp cover,.....
3) t18 with cruiser 3spd adapter, bell housing, flywheel, clutch,...for ford 302
4) a440f with split case combo
5) h55f with split case combo
6) h42 with split case combo
7) good running 75 2f engine complete

the list goes on ........

pm me if you are interested in any of this stuff. i don't want to haul heavy items there unless somebody is interested in them.

georg @ valley hybrids

Is the kick ass junk truck going to be there?

Partially list:
1) Professionally painted aluminum Tundra rims. FIVE. The nice "plain" 6 spoke style. Come with twice used new lug nuts and 4 plain rustoleum painted center caps. $500
2) NP203 to LC 16 spline tcase adapter. Installed but not run. $400
3) Used 16 spline tcase with shifter. Year unknown. $150.
4) Turbo 400 to NP203 adapter, input gear, AND tranny output shaft. $250
5) Bunch of cady 472/500 type parts. Rebuilt heads, crank, headers, etc.
6) FJ60 knuckles, steering arms, and lower trunion caps. $70
7) Longs hub gears. $100 for the pair. These are new unused.
8) New FJ55 three speed ebrake cable
9) two sets FJ40 tail lights with lens
10) FJ55 front stock tow hooks. TWO
11) SOR FJ55 black visor covers

Plus the usual crap that has made the trip 5 or 6 times now:laughing: Just look for the white Tacoma

bring it all i just spent all day stuffing goody bags for all who want them get them while they last 10 $ to 15 $ value so you make money just to show up

1)FJ 40 soft top, Black
2)FJ 60 exaust manifold
3)(maybe) a 74 FJ40 350 Wiring needs to be finished
4)new 74 40 tail lights
5)Tub of assorted parts

Dibs on any FJ cruiser stuff... Lemme know ;)

does that include OEM 17" FJC wheels?

anyone have a set collecting dust ? :D

does that include OEM 17" FJC wheels?

anyone have a set collecting dust ? :D

Not OEM FJC but how about Tundra rims? I got a set of five coming to PMC that come with lug nuts and center caps.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=434218&stc=1&d=1239063775

Forgot... do we know of any businesses that might be coming? Marlin? Ruffstuff? Decker?

Trying to decide how many quarters I need to break out:flipoff2:

Thanks John,
lookin for steelies...should have mentioned that in my initial post :p

Forgot... do we know of any businesses that might be coming? Marlin? Ruffstuff? Decker?

Trying to decide how many quarters I need to break out:flipoff2:

I'm pretty sure Paul Decker will be there. He has a new tankless water heater that kicks ass. We used it at Rubithon this year.

Forgot... do we know of any businesses that might be coming? Marlin? Ruffstuff? Decker?

Dan is in the process of moving his shop to Loomis, so he won't be joining us this Sat. :(

found a set of wheels :D

thanks grizzly :beer:

Wanted:
1) rear shackles, about 4 3/4" (?) center to center IIRC. Currently running rigid Confer style with 5/8" geaseable pins. Need 1-2 shackles and 2 or more pins, plus 5/8" bushings. Or maybe a good time to change to something else better?
2) 1 ton steering arms, TREs, etc for fj60 knuckles to sag PS. still have some research to figure out what's needed.
3) parking brake cable for 77 vintage pull to 4 speed case. all or part - have a project in mind and only need the front half of it - attachment to pull handle plus a few feet.
will post other junk when I think of it in case anyone cares... :)

Traveling to/from San Jose area. Have limited space, but if anyone needs something hauled let me know. (route through SF via 280/101).

Marlin and Chris are heading up Friday afternoon. We're packing up the boxes of goodies tomorrow.

Does anyone have a bikini top rail or windshield glass for a '78 JF40?

X2 on the late fj40 windshield glass...

happy friday :)

Wanted:
1) rear shackles, about 4 3/4" (?) center to center IIRC. Currently running rigid Confer style with 5/8" geaseable pins. Need 1-2 shackles and 2 or more pins, plus 5/8" bushings. Or maybe a good time to change to something else better?
2) 1 ton steering arms, TREs, etc for fj60 knuckles to sag PS. still have some research to figure out what's needed.
3) parking brake cable for 77 vintage pull to 4 speed case. all or part - have a project in mind and only need the front half of it - attachment to pull handle plus a few feet.
will post other junk when I think of it in case anyone cares... :)

Traveling to/from San Jose area. Have limited space, but if anyone needs something hauled let me know. (route through SF via 280/101).

I will be bringing 1 ton arms.

Thanks to everyone who came out and attended the swap meet! Thanks for your participation and support!!

Good times my friend, good times.

Thank you PMC for another good swap meet.

I liked the new raffle format. Made it very smooth. And damn that salmon was good:smokin:

I also found it ironic that the one seller of 55 parts was next to the guy looking for 55 parts:homer: Got a couple little parts and didn't have to get out of the chair:laughing:

My computer crashed yesterday and I lost all my pics I took at the swap meet. There was a guy with a white fj40 with a sweat install of a Vortec. Anyone know his name and phone#? I want to steal some of his ideas when I do my Vortec swap.

BTW another great time. 12 in row, amazing...............:eek::eek: Thanks PMC!!

My computer crashed yesterday and I lost all my pics I took at the swap meet. There was a guy with a white fj40 with a sweat install of a Vortec. Anyone know his name and phone#? I want to steal some of his ideas when I do my Vortec swap.

BTW another great time. 12 in row, amazing...............:eek::eek: Thanks PMC!!

I don't recall who the guy was but I talked with him a bit this swap meet and have a couple engine bay pictures from last swap meet(3 or 4).

The air cleaner was a "hacked" up K&N filter charger for an Avalanche.

Would you email me the pics you have?:D

He had the AC working and he hooked up the cruise control. I thought that was cool:p I was surpised that he still had the old LC master brake setup. A lot of alternatives available to change out the master. Overall, I thought he did a really good job installing that Vortec.

Some work I did for my Vortec today.
Ordered a fuel pump today from Autozone "E8248", with a PF4777 filter. $150 for both.
The Vortec's have a fuel regulator built in, from what I learned. No need for the Corvette filter with built in regulator.
Also, got a new thermostate. Stock is 197*. Interesting, the thermostate comes with its own housing as a single unit.

I ordered chrome plated headers from AA, $235. Back ordered a month. A little bling for the engine.

Researched an aluminum radiator from the links previously posted. Griffin 1-28202-x, 24x19x2". Has inlet and outlet on the passenger side. Works better in that setup than the stock cruiser radiator. No hoses to lay across the engine. ~$300.

Bill, I posted the pictures into your post.

The "older" Vortecs had an internal fuel regulator. The newer(2003??) had only a single line going to it and needed the "corvette" fuel filter/regulator setup.

Cruise control with drive by wire is very easy but yours isn't the DBW:laughing:

The radiator can be found in 2.5" and 3" widths too.

i would like to thank all who showed up to the swapmeet hope you had a good time if you have any ideas to make it better next year let me know thanks once again

ron safreno
pmc swapmeet chairman

456693

456694