GenRight Off Road
06-16-2009, 12:28 PM
SWB1003
This is the GenRight "hollow" rear sway bar kit to fit a Jeep TJ, LJ or YJ. These are great to add stability to your lifted or long travel vehicle. Our sway bar is about 30% stiffer than other brand Anit-Rock type sway bars and the ends are reinforced for durability off-road.
http://www.genright.com/images/products/SWB1003a_MULTI_md.jpg
In fact, this sway bar is so good a front sway bar is not necessary. These sway bars are custom made to fit the width of a Jeep frame and survive up to 16" travel shocks (when properly mounted).
This is the type sway bar that you leave connected all the time, on-road AND off-road.
Our kit includes:
* 18" long Solid Steel arms
* 1-1/4" diameter splined bar
* CNC machined bushings
* Adjustable heims at both ends of the links
* Tabs to weld to the frame
* Tabs to weld on the axle
* All the proper mounting hardware
Unlike other brands, we provide you with all the mounting tabs and brackets, including a 48" long tube to house the main sway bar in for mounting. Then you cut the link tubes to the proper length (to match your lift) and weld in the threaded inserts.
Works great with stock coil springs, lifted suspensions or our Coilover shock conversions kits. It can be mounted forward of the axle as pictured or behind the axle over the rear of the gas tank.
Front sway bars are available too!
http://www.genright.com/ProductInfo.aspx?productid=SWB1003
This is the GenRight "hollow" rear sway bar kit to fit a Jeep TJ, LJ or YJ. These are great to add stability to your lifted or long travel vehicle. Our sway bar is about 30% stiffer than other brand Anit-Rock type sway bars and the ends are reinforced for durability off-road.
http://www.genright.com/images/products/SWB1003a_MULTI_md.jpg
In fact, this sway bar is so good a front sway bar is not necessary. These sway bars are custom made to fit the width of a Jeep frame and survive up to 16" travel shocks (when properly mounted).
This is the type sway bar that you leave connected all the time, on-road AND off-road.
Our kit includes:
* 18" long Solid Steel arms
* 1-1/4" diameter splined bar
* CNC machined bushings
* Adjustable heims at both ends of the links
* Tabs to weld to the frame
* Tabs to weld on the axle
* All the proper mounting hardware
Unlike other brands, we provide you with all the mounting tabs and brackets, including a 48" long tube to house the main sway bar in for mounting. Then you cut the link tubes to the proper length (to match your lift) and weld in the threaded inserts.
Works great with stock coil springs, lifted suspensions or our Coilover shock conversions kits. It can be mounted forward of the axle as pictured or behind the axle over the rear of the gas tank.
Front sway bars are available too!
http://www.genright.com/ProductInfo.aspx?productid=SWB1003