|
rubicon42 06-25-2009, 07:34 PM I am having a hard time finding wheels for my jeep. I'm looking for at least 5" backspacing but I need at least at 10" rim for the tires I want. The bolt pattern is 170mm from a 05' ford 1 ton. I have a set of tires and wheels that I plan on using for the trail, but I'm wanting to draw the wheels in a bit for on-road use. Any Ideas 18x10 to fit 15.50/42/18 flatlander757 06-25-2009, 07:36 PM Come back on Tuesday... until then get to know my friend Google:) Or better yet buy a red star and use the Pirate search button. dcswindler4 06-25-2009, 08:34 PM 18x10 W/5"BS http://www.summitracing.com/search/Department/Wheels-Tires/Section/Wheels/Part-Type/Wheels/Rim-Diameter-in/18-in/Rim-Width-in/10-00-in/Wheel-Bolt-Pattern/8-x-170mm/Backspacing-in/5-000-in/?Ns=Rank|Asc 18x10 W/5.5"BS http://www.summitracing.com/search/Department/Wheels-Tires/Section/Wheels/Part-Type/Wheels/Rim-Diameter-in/18-in/Rim-Width-in/10-00-in/Wheel-Bolt-Pattern/8-x-170mm/Backspacing-in/5-500-in/?Ns=Rank|Asc barillms 06-26-2009, 12:30 AM Hummer beadlocks dude, best bet. $38 each for a double beadlock wheel. Don't let them fool ya... you can put a wide tire on a narrow wheel. E_Markward 06-26-2009, 05:35 AM Hummer beadlocks dude, best bet. $38 each for a double beadlock wheel. Don't let them fool ya... you can put a wide tire on a narrow wheel. Where Can you get H1's for $38 cj8scrambld 06-26-2009, 05:42 AM Hummer wheel also don't have a 170mm pattern....unless the center is replaced....plus he already has the tires for an 18" rim. I say sell the tires, pickup H1's, and recenter. LYRCH 06-26-2009, 07:54 AM Great idea just started assembling my centers from madmac there comin out sweet Dook 06-26-2009, 08:00 AM 16.5 inch wheel won't go over the superduty braking components I don't think cj8scrambld 06-26-2009, 08:32 AM ^^^ yeah, I was just thinking that. That and the relative limited availability of 16.5" tires I have H1's and have been happy with SuperSwampers....at least they've been 16.5' friendly. There are other options such as Stazworks, Walker Evans, Hutchinsons (OEM of H1's), and etc. Austin4x4 06-26-2009, 03:49 PM 16.5 inch wheel won't go over the superduty braking components I don't think they will. but might have to be recenterd. and why is this in the hardecore jeep section and not in general4x4, or even ford? barillms 06-26-2009, 08:41 PM Berg General Supply in North Carolina. Stock Hummer wheels are $150 for FOUR. 406 YJ 06-26-2009, 08:43 PM I'll recenter you up a set:D And I have 95% 37's for 75 ea that would be a great fit for your road tires. They are goodyear radials LYRCH 06-27-2009, 07:46 AM I have an 01'ford dana 60 and with 3in of negative offset it clears with 3/4 of an in clearence FROM THE BRAKE CALIPER with an h1 16.5 barillms 06-27-2009, 03:33 PM The H1 rubbing occurs on the Twin Piston Caliper ON THE BLEEDER. The wheel hits the bleeder. LYRCH 06-28-2009, 02:36 PM Mine does'nt even come close to the bleeder screw it's on the inside of the caliper | |