AHEAVYBRONC
07-13-2009, 07:50 PM
I'm selling my truck because I don't have the time to finish it. It's a 1988 Ford Bronco.
I currently have the motor and transmission swap finished. it has a 351 Windsor motor. All new front parts on the motor; alternator, fan, belts, hoses, starter, radiator, etc. It also has an Eldelbrock carb and air intake The engine has new pistons, oil pump, and Crane cams camshaft. And all the gaskets are new. The transmission is an automatic C-6 with a New Process 208 transfer case. I have both the front and rear drive shafts for them, but they aren't on because I wanted to put new ujoints in first (which I have). I have the front of the truck completely wired. It turns over fine, the timing needs a little adjusting but won't be a big obstacle for a smart man with a Haynes book (which I also have). For the exhaust I already have Hedmann long tube headers on, but I have the exhaust tubing, cat convertors, and stainless steel magna-flow mufflers waiting to go in. Inside the truck I have all new autometer gauges and a diamond plate gauge bezel. The gauges need wired and plumbed to their specific locations (oil, water, fuel, etc.). The radio, speakers, rear lights, and rear window need wired. I have already replaced the steering wheel and installed a B&M shifter. The transfer case shifter needs a linkage from the shifter to the transfer case. I have two summit racing seats with the brackets and one Simpson 5 point racing harness. I also have a roll cage that needs to go in as well. I have a bone stock Dana 44 straight axle for the front. But My Ford 9 inch rear axle has 4.10 gears and a Detriot True Track limited slip in it. BUT I have 4.88 gears and a Detriot Locker on standby to go in that. The 6 inch lift is made by Super Lift except for the rear leaf springs, which are made by BDS. I have 37 inch Super Swamper Boggers that are brand new. The front bumper is a Warn winch bumper.
If you are interested send me an email. I will only consider reasonable offers. If you would like to trade for an atv or utv, please let me know the make, model, year, condition. You can call me at 330-221-4569
Kelley
I currently have the motor and transmission swap finished. it has a 351 Windsor motor. All new front parts on the motor; alternator, fan, belts, hoses, starter, radiator, etc. It also has an Eldelbrock carb and air intake The engine has new pistons, oil pump, and Crane cams camshaft. And all the gaskets are new. The transmission is an automatic C-6 with a New Process 208 transfer case. I have both the front and rear drive shafts for them, but they aren't on because I wanted to put new ujoints in first (which I have). I have the front of the truck completely wired. It turns over fine, the timing needs a little adjusting but won't be a big obstacle for a smart man with a Haynes book (which I also have). For the exhaust I already have Hedmann long tube headers on, but I have the exhaust tubing, cat convertors, and stainless steel magna-flow mufflers waiting to go in. Inside the truck I have all new autometer gauges and a diamond plate gauge bezel. The gauges need wired and plumbed to their specific locations (oil, water, fuel, etc.). The radio, speakers, rear lights, and rear window need wired. I have already replaced the steering wheel and installed a B&M shifter. The transfer case shifter needs a linkage from the shifter to the transfer case. I have two summit racing seats with the brackets and one Simpson 5 point racing harness. I also have a roll cage that needs to go in as well. I have a bone stock Dana 44 straight axle for the front. But My Ford 9 inch rear axle has 4.10 gears and a Detriot True Track limited slip in it. BUT I have 4.88 gears and a Detriot Locker on standby to go in that. The 6 inch lift is made by Super Lift except for the rear leaf springs, which are made by BDS. I have 37 inch Super Swamper Boggers that are brand new. The front bumper is a Warn winch bumper.
If you are interested send me an email. I will only consider reasonable offers. If you would like to trade for an atv or utv, please let me know the make, model, year, condition. You can call me at 330-221-4569
Kelley