FreakAccident
09-12-2002, 06:20 PM
I read the posts on how others did it. I found an easy way to get those little basturds in there. This works great and much less vibes! Course golf balls would work with this method too. Just jam em in.
1. Jack one corner up
2. pull valve core and let air out.
3. Use a prybar to bust the bead being careful not to fawk up the bead in the process. Easier than it sounds. Takes two minutes.
4. Jam jack handle or pipe in tire.
5. Pour BBs in through handle/pipe using regular funnel.
6. Yank pipe/handle out.
7. Air the tire up seating bead however you normally do. I useda tow strap and a prybar. Just twisted the strap around the tire. Lack of ratchet strap is why I did this.
I used about 2500 BBs for each tire. I bought two 5000 boxes and measured them out in a measuring cup.
1. Jack one corner up
2. pull valve core and let air out.
3. Use a prybar to bust the bead being careful not to fawk up the bead in the process. Easier than it sounds. Takes two minutes.
4. Jam jack handle or pipe in tire.
5. Pour BBs in through handle/pipe using regular funnel.
6. Yank pipe/handle out.
7. Air the tire up seating bead however you normally do. I useda tow strap and a prybar. Just twisted the strap around the tire. Lack of ratchet strap is why I did this.
I used about 2500 BBs for each tire. I bought two 5000 boxes and measured them out in a measuring cup.