|
jstarnes 09-13-2002, 03:02 PM OK first off I did the search Gimik Do you guys do any think to prep the bear metal on the tube stuff that you build(sanding,sandblasting,etching primer?)OR do you just clean and paint Thanks as always for the info! Jason Weezer 09-13-2002, 04:40 PM I like to use a rustoleum primer coat followed by a coat of rustoleum. :flipoff2: SpaceGhost 09-13-2002, 04:44 PM My stuff is cleaned and roughed up with a green scratch pad or 2, then wiped down with MEK or equivelant, before being primed with an etching primer. The scratch pads take a little while but are worth the effort! toy 4 rox 09-13-2002, 05:36 PM i clean with 409 and rattle can it. Maine Jeepah 09-13-2002, 06:57 PM Originally posted by SpaceGhost My stuff is cleaned and roughed up with a green scratch pad or 2, then wiped down with MEK or equivelant, before being primed with an etching primer. The scratch pads take a little while but are worth the effort! You know MEK is really nasty shit right? The MSDS doesnt do it justice. :rolleyes: http://www.state.nj.us/health/eoh/rtkweb/1258.pdf Just an FYI for all you kids out there...dont get it on each others hootuses or whatever and then lick it off. ;) MJ | |