PDA

: Brake MC

vova
09-13-2002, 11:15 PM
Which one goes to the front brakes and which to the rear? Does it matter?
charlo
09-13-2002, 11:48 PM
They both go to the proportioning valve. On mine the front goes to the front brakes an back to the back.
Dan shsss
09-13-2002, 11:51 PM
The small line goes to the front brakes after the proportioning valve and big line to the rear after the p valve
vova
09-13-2002, 11:56 PM
I was only going to run a P-valve on the back brakes. Will this be OK?
Dan shsss
09-14-2002, 12:06 AM
I dont see why not ,Ive heard of people just running the brake lines direct from the mc to the front brakes,,mostly on d60 calipers
vova
09-14-2002, 12:11 AM
Originally posted by slim1217
I dont see why not ,Ive heard of people just running the brake lines direct from the mc to the front brakes,,mostly on d60 calipers

Good. Mine is a D60 / 14-bolt setup :D
mj
09-15-2002, 09:28 AM
with no shuutle valve you will have no brakes if yoou break a line
spoolnaround
09-15-2002, 12:22 PM
whats that MC from?
vova
09-15-2002, 10:02 PM
it's for a 73" 3/4 TON. $19.99
SCOTTS_4X
09-15-2002, 10:11 PM
you are aware that if you lose a line you will have no brakes without a proportioning valve right? just something to think about.......

-Scott
xtrm-s10
09-15-2002, 10:40 PM
I have a P Valve that you can have it is new, it is a wilwood adj.
I live in S.J. on carlton by Union give me a call if you want it 595-8089