2003_ram
07-30-2009, 02:29 PM
YES I searched. I found some good info, but nothing pertaining to this kit : http://www.4wheelparts.com/Drivetrain-Differential/Front-Hub-Conversion.aspx?t_c=12&t_s=237&t_pt=5313&t_pl=4535&t_pn=WAR60165
I want to know, if I buy that kit, will it take my little 27 spline outers and make it to 30 spline? It looks like it includes the hubs, rings, bearings and what not. Only thing I have to order is the 30 spline chromo shaft from Warn itself.
Am I seeing this right? As in its all bolt and press, nothing had to be milled/drilled?
Solid Axle
07-30-2009, 02:53 PM
Measure the ID of your spindle. You may have to lightly bore your spindle. You'll be after a 1.320 spindle bore.
Matt
2003_ram
07-31-2009, 10:33 AM
Measure the ID of your spindle. You may have to lightly bore your spindle. You'll be after a 1.320 spindle bore.
Matt
Okay thats not much of an issue. I don't have the axle apart right now, and don't have the time to do it. So I'll safely assume thats what I am going to have to do. But other than the spindle, its all bolt together?
RustoleumWhite
07-31-2009, 12:38 PM
Is that just for the locking hubs or the whole kit (hubs and all).
If it comes with all listed to me thats a smoking deal, since just external locking hubs will cost you $150.
The description is kind of vague, implies that it is, but like I said, for getting a new set of wheel hubs at the same time it seems like a pretty cheap/good deal.
It was either Urban Wheeler or BLK Scout 800 that did a 30-spline conversion and post up about it here. At Least I'm pretty sure it was one of them.
never mind, I made it easy. Found it in the FAQ :D
http://www.pirate4x4.com/forum/showthread.php?t=588687
Urban Wheeler
07-31-2009, 12:47 PM
Is that just for the locking hubs or the whole kit (hubs and all).
If it comes with all listed to me thats a smoking deal, since just external locking hubs will cost you $150.
The description is kind of vague, implies that it is, but like I said, for getting a new set of wheel hubs at the same time it seems like a pretty cheap/good deal.
It was either Urban Wheeler or BLK Scout 800 that did a 30-spline conversion and post up about it here. At Least I'm pretty sure it was one of them.
never mind, I made it easy. Found it in the FAQ :D
http://www.pirate4x4.com/forum/showthread.php?t=588687
BlkScout, and IIRC he used Toy parts.