PDA

: Shorty TBI headers

JeffHPK5
08-04-2009, 05:57 PM
Have a new set of stainless shorty headers for SBC ... with O2 bung. Have 3/8" flange and bolts.

$130 in the lower 48
flexNtwist
08-04-2009, 07:12 PM
Those will fit a 5.7L LT1 correct pics to jphines_27@yahoo.com very interested.
JeffHPK5
08-05-2009, 04:33 PM
I bought them for a 88 K30.. don't know why it wouldn't fit a LT1 ... only problem would be if you needed O2 bungs in both headers.

Pics soon.
flexNtwist
08-06-2009, 08:52 PM
I do need o2 sensors in both sides. sorry
JeffHPK5
11-09-2009, 04:21 PM
BTT.... If it helps to sell these I will have a bung welded in the pass-side header for a second o2.

This will be tig'd in by a professional.

Jeff
moonshadowmetals
11-09-2009, 06:54 PM
If your LT-1 has D port heads (the aluminum heads that came on LT-1s from 93 through 97). The exhaust is not centered on the port, it is high. Regular SB headers will not fit properly.
Greenjeepin
11-10-2009, 07:55 AM
do these fit a 95 tbi 350 motor from a suburban?
JeffHPK5
11-10-2009, 03:14 PM
They where advertised as fitting 88-95 5.0 and 5.7 SBC.

As posted above they don't fit the LT-1 Alum. heads.

I'll post pics tonight.

Jeff
Odin K30
11-10-2009, 03:55 PM
What brand are they?
JeffHPK5
11-10-2009, 04:31 PM
I can't remember which brand they are.. I found the year and model sticker in the hardware bag but no manufacturer. I'm thinking maybe DynoMax or Hedman...

Here's some pics
flexNtwist
11-10-2009, 09:33 PM
My Lt1 is out of a caprice w/ cast iron heads, the bung wont be a problem I can weld one in. I thought they were D- Port, I thought all Lt1's were but I was wrong.
jeepinwilson
11-11-2009, 04:45 AM
If your LT-1 has D port heads (the aluminum heads that came on LT-1s from 93 through 97). The exhaust is not centered on the port, it is high. Regular SB headers will not fit properly.

Wrong...
Those headers will fit on an LT1 just fine, even though the port does not match exactly, using the gasket that matches the header port will seal it just fine. I have been running that same header type for 10 years on my LT1 and has never leaked and they bolted right up.
JeffHPK5
11-12-2009, 02:43 PM
SOLD SOLD SOLD

Thanks, Jeff