BigMike
08-06-2009, 08:19 AM
Marlin Crawler now carries these Heavy Duty Long Spline Drivelines to suit your single, dual, and triple case needs (Toyota drivetrains).
Our USA-made Heavy Duty Long Spline Drivelines feature a 10-spline 1-5/8" slip and is built with 0.156-inch thick USA steel tube! http://board.marlincrawler.com/Smileys/marlin/usa.gif
http://marlincrawler.com/sites/all/marlin/files/driveline_hd640.jpg
Spline Diameter:
Marlin Crawler Heavy Duty: 1.625"
Stock Toyota: 1.300"
Percent Difference: 25% larger!
Wall Thickness:
Marlin Crawler Heavy Duty: 0.156"
Stock Toyota: 0.060"
Percent Difference: 160% thicker!
Available with or without a CV Joint, they feature full length splines for maximum extension and versatility to fit your custom high strength driveline needs. The longer the driveline, the longer the splines.
If ordered with a CV Joint, we have performed custom grinding modifications to provide the maximum working angle possible.
These drivelines are built to order, and will get your project finished and get you out on the trails where you belong!
Applications include:
Axle End:
FJ40 1963-8/69 (64mm x 56mm x 8mm)
FJ40 8/1969-1/74 (64mm x 56mm x 10mm)
FJ60/62 Late (66mm x 66mm x 11mm)
Hilux 1979-83 (64mm x 56mm x 8mm)
Hilux 1984+ "non-CV" (60mm x 60mm x 10mm)
Hilux 1986-87 Turbo 4cyl (66mm x 66mm x 11mm)
Hilux 1988+ V6 (66mm x 66mm x 11mm)
Transfer case End:
CV: 1979-83 4cyl (60mm x 68.3mm x 8mm)
CV: 1984-95 4cyl (60mm x 68.5mm x 10mm)
CV: 1988-95 V6 (61.5mm x 70mm x 10mm)
non-CV: 1984+ (60mm x 60mm x 10mm)
For more information, please click-through to our Catalog listing for this item:
http://www.marlincrawler.com/axle/drive-shafts/heavy-duty-long-spline-driveline
Our USA-made Heavy Duty Long Spline Drivelines feature a 10-spline 1-5/8" slip and is built with 0.156-inch thick USA steel tube! http://board.marlincrawler.com/Smileys/marlin/usa.gif
http://marlincrawler.com/sites/all/marlin/files/driveline_hd640.jpg
Spline Diameter:
Marlin Crawler Heavy Duty: 1.625"
Stock Toyota: 1.300"
Percent Difference: 25% larger!
Wall Thickness:
Marlin Crawler Heavy Duty: 0.156"
Stock Toyota: 0.060"
Percent Difference: 160% thicker!
Available with or without a CV Joint, they feature full length splines for maximum extension and versatility to fit your custom high strength driveline needs. The longer the driveline, the longer the splines.
If ordered with a CV Joint, we have performed custom grinding modifications to provide the maximum working angle possible.
These drivelines are built to order, and will get your project finished and get you out on the trails where you belong!
Applications include:
Axle End:
FJ40 1963-8/69 (64mm x 56mm x 8mm)
FJ40 8/1969-1/74 (64mm x 56mm x 10mm)
FJ60/62 Late (66mm x 66mm x 11mm)
Hilux 1979-83 (64mm x 56mm x 8mm)
Hilux 1984+ "non-CV" (60mm x 60mm x 10mm)
Hilux 1986-87 Turbo 4cyl (66mm x 66mm x 11mm)
Hilux 1988+ V6 (66mm x 66mm x 11mm)
Transfer case End:
CV: 1979-83 4cyl (60mm x 68.3mm x 8mm)
CV: 1984-95 4cyl (60mm x 68.5mm x 10mm)
CV: 1988-95 V6 (61.5mm x 70mm x 10mm)
non-CV: 1984+ (60mm x 60mm x 10mm)
For more information, please click-through to our Catalog listing for this item:
http://www.marlincrawler.com/axle/drive-shafts/heavy-duty-long-spline-driveline