Since everything is out of the truck here is what's for sale.

All comparison prices from AC and Calmini

MAKE AN OFFER!
This comes off a 2003 SC Crew cab Frontier. Everything is off the truck and ready to be shipped/picked up.

4x4parts rear lift shackles.
$20
http://i104.photobucket.com/albums/m193/bogof777/off%20road/100_0329.jpg

Two Rancho RS9000 rear shocks (the white ones in this pic)
$50
http://i104.photobucket.com/albums/m193/bogof777/HPIM0763.jpg

http://i104.photobucket.com/albums/m193/bogof777/HPIM0762.jpg

Two Rancho RS9000XL shocks Frontier/Xterra (front) Minor damage to boots from friction with UCA.
$75 (AC $170)
http://i104.photobucket.com/albums/m193/bogof777/My%20truck/S3000005.jpg

http://i104.photobucket.com/albums/m193/bogof777/My%20truck/S3000003.jpg

Calmini UCAs (needs new ball joints)
$150 (Calmini $350)
http://purenissan.com/xterra-control-arms1.jpg

Torsion bars, Anchors, Tie rods, Stock steering(for core), CVs, Idler arm(2), hubs, and anything else make an offer.
And a bunch of other stuff just ask.

The steering was always straight and in good condition.

I am open to offers if the prices aren't right for you.

Everything is in Alamosa CO

Also.

A custom rear bumper with integrated class 3 Reese hitch. Completely bolt on made with combo of DOM and HREW. Will hold the weight of the vehicle on the far outside corner. Has scratches but is in good condition(easy touch up with spray can of bedliner).
$250 (Calmini price for a tube bumper without shipping or hitch $349.95)
http://i104.photobucket.com/albums/m193/bogof777/My%20truck/truck007.jpg

5lb CO2 tank with mount
$75
http://www.tellico4x4.com/product_info.php/products_id/18733

I know its been a while but do you still have that bumper? If so how would you get it to CA? Is $250 Shipped??? On i diferent note i feel like a dumb ass asking you this but my Ranch 9000s are mounted oposite from the way you have yours. Does that matter?

I sold the bumper a while ago.

For the shocks they are supposed to be that way. Do you have the 9000's or the 9000xl's? the XL's have to be mounted that way since they are nitrogen charged. The 9000's could be mounted upside down if you have to.

Hey, I was wondering if you still have the control arms and shocks. And also what torsion bars you have, if they were stock or upgraded ones. Thanks

The only parts I have left are the front shocks.

do you still have the 5# tank? damn i hope so! haha

No I decided to use it with my welding setup. Sorry.

u still have the front shocks? I sent u a pm?