|
Jason M 09-15-2002, 06:44 PM I need a shim to weld to the inner portion of my frame to attach the inside spring hanger to. Picture a shim that is 10"x4" and tapers from 1" to 1/2" Basically this would make my frame become square in the rear where it starts to bow out. Am I making any sense? Easier way to do it? GloNDark 09-15-2002, 06:55 PM My father in law has a shit load of scrap plate laying around. About license plate size and 1 inch thick. Just an idea. :D Jason M 09-15-2002, 06:58 PM :D RHINO 09-15-2002, 07:32 PM how bout a 3" square tube, cut down the middle to give both "shims" then welded to the frame? i can make'em for ya if you dont have the means. Jason M 09-15-2002, 09:41 PM Originally posted by RHINO how bout a 3" square tube, cut down the middle to give both "shims" then welded to the frame? i can make'em for ya if you dont have the means. That is a great idea!!! I have a bunch of 2x4 tubing. RIGHT AWN!! I was not looking forward to trying to weld a 1" plate to my frame.. :D | |