anybody got a writeup, or some ideas for mounting and fabbing the linkage and shifters for a twin stick 205 in my truck...its a married t-case...

i have seen the articles in the 4x4 mags, but they left out some details

thanks guys

I'm not sure if your shifter works like mine, but mine is just a big bolt that goes into the t-case adapter and the shifter spins on it. what I did was weld a nut onto the head of that bolt and use another bolt for the second shifter. as for the shifter itself, all I did was use a stock shifter fot the outside one and then for the inside one I cut off the offset eye and cut out the middle offset part and welded the eye back onto the shifter.....then I just used a few little 5/16 teflon lined hiems and some althread (cut off bolts actually) for the linkage to the case.

-Scott