another piece of the buggy done :confused:

:D

;)

looks awsome ru going to put a body on it

are you going to stand up to ride in this thing??????????:flipoff2:

It's no longer "the row boat"






























It's "the shower" :flipoff2:

Seriously, it looks really funky from those first two particular angles. But I'll reserve judgement until the rest of the tub is filled in. It's not like my judgement means a squat, anyway. Who cares what some guy on the internet 1200 miles away thinks?

Originally posted by TNToy
It's no longer "the row boat"
It's "the shower" :flipoff2:

Seriously, it looks really funky from those first two particular angles. But I'll reserve judgement until the rest of the tub is filled in. It's not like my judgement means a squat, anyway. Who cares what some guy on the internet 1200 miles away thinks?



Naaaa, i think it looks funky too... but with a seat in place approximatly the height you will sit at there's 8 inches above my head.... maybe a bit much? never know i might move the seat up, but i'm not sure i like how it sit's either...

it kinda looks like a golf cart now :flipoff2:

Dear god! Tell Dan to step away from the Bender!:flipoff2:

I did the same thing with my front hoop/windshield. Looks good dude's:flipoff2:

hay it looks bad but it like only 6.2" tall it just looks bad because of the tub. it is going to be taller it wont look so bad after we fill it in



:massey:

ok and by the way im doing all this with a H/F bender :smokin:


:massey:

Bending tube is harder than it looks...:)

it woudl be like the hardest thing i have ever did but it fun



:massey:

I hear that.:)

i could just sit out in the shop and play with that thing :bender: for hours


:massey:

Originally posted by moto261
i could just sit out in the shop and play with that thing :bender: for hours


:massey:

:confused:

To much info man.:flipoff2:

Originally posted by moto261
i could just sit out in the shop and play with that thing :bender: for hours


:massey:

I think that might me part of the problem. If you would quit putting your thingy in the bender it might work a little better. Rember the die is for 1.75 not .0005. :flipoff2:

Originally posted by fatkid


:confused:

To much info man.:flipoff2:


but Phatty... he swear's he learned everything about :bender: love from you :confused:

Hey DSI, I think you may have been looking at the legs on that collapsible chair a little too much - Is this thing gonna fold up into a footlocker to transport it?

Originally posted by RobertCharlesGassert
Hey DSI, I think you may have been looking at the legs on that collapsible chair a little too much - Is this thing gonna fold up into a footlocker to transport it?

:confused: :confused: :confused: :confused: :confused:

Originally posted by RobertCharlesGassert
Hey DSI, I think you may have been looking at the legs on that collapsible chair a little too much - Is this thing gonna fold up into a footlocker to transport it?

No we werent thinking of a footlocker for transport, but if you could swing by and bend over, we will see if it will fit in the area we were thinking.

Originally posted by DSI
:confused: :confused: :confused: :confused: :confused:

OK, look at the chair and the buggy - see the resemblance?

Originally posted by AMJ
No we werent thinking of a footlocker for transport, but if you could swing by and bend over, we will see if it will fit in the area we were thinking.

Yer freaky!

Originally posted by RobertCharlesGassert


Yer freaky!



OH ya baby more than you would ever know. :p

Originally posted by AMJ




OH ya baby more than you would ever know. :p


so that's why you alway's get hotel room's and want to buy me drink's for CalROCS events.... now i se what you are trying to do :flipoff2:

Originally posted by DSI




Naaaa, i think it looks funky too... but with a seat in place approximatly the height you will sit at there's 8 inches above my head.... maybe a bit much? never know i might move the seat up, but i'm not sure i like how it sit's either...

Looks like a stock sammy in the backround, just try to keep close to those dimensions and it should turn out fine. I almost stopped a couple times when doing mine, but my sketches looked good so I kept going. It looks completely different with all your junk bolted on.

Originally posted by Azrckcrawler


Looks like a stock sammy in the backround, just try to keep close to those dimensions and it should turn out fine. I almost stopped a couple times when doing mine, but my sketches looked good so I kept going. It looks completely different with all your junk bolted on.

not really going off of a plan or measurement other than the 48in minimum interior width requirement...

just kind of going by look as it goes togeter

and where am i going to stay :(


:massey:

Originally posted by AMJ
OH ya baby more than you would ever know. :p

Well there ya have it - you're right - I wouldn't WANT to know!

Originally posted by moto261
and where am i going to stay :(


:massey:

I do believe camping is available :flipoff2:

Originally posted by AMJ


I do believe camping is available :flipoff2:


sleep in the front seat of your tow rig bitch... i did it for 7 nights at the hammer's it's not all that bad :flipoff2:

Originally posted by moto261
ok and by the way im doing all this with a H/F bender :smokin:


:massey:


....As in Harbor Freight PIPE BENDER? :confused: :confused: :confused:

Originally posted by Flipper



....As in Harbor Freight PIPE BENDER? :confused: :confused: :confused:



Ya. Why is their a problem bending DOM in a pipe bender :confused:

It's all about the goat luvin...

Come awnn!

Originally posted by AMJ




Ya. Why is their a problem bending DOM in a pipe bender :confused:


Nahh, but there is a problem bending HREW in one........... that is the most shiney DOM I have ever seen:flipoff2: I think you may have been ripped off.

What size tube is that you are you using?

Matt

Originally posted by RockRanger
What size tube is that you are you using?

Matt

i second that

got the power train (79 bronco), gathering goodys now:D

1.75 :flipoff2:


:massey:

Originally posted by Wilson



Nahh, but there is a problem bending HREW in one........... that is the most shiney DOM I have ever seen:flipoff2: I think you may have been ripped off.

Wilson, the tube turns "into" DOM when it gets painted :D

Ahhhhh, ok. I was just checking. I never would have guessed the extra cost was to cover the paint cost of the manufacturer.:confused:

the H/F bender comment was JOKE it is hrew .120 wall (welded seem) dom costs mad $$$$$$$ so there you go




:massey:

I knew your comment was a joke, so I replied with one too, the shiney tube is a dead giveaway to what it is. What does DOM cost up there? We can get it for as little as $2/foot sometimes.

well the 1.75 .120 wall is $1.38 a ft my 1.5 .250 wall DOM for my link bars was a wee bit more ;)

otherwise i've never priced DOM

Originally posted by Wilson
I knew your comment was a joke, so I replied with one too, the shiney tube is a dead giveaway to what it is. What does DOM cost up there? We can get it for as little as $2/foot sometimes.


Damn $2/foot is cheap. I just priced some yesterday at $6.00/foot.

$6/ft is a joke. I suppose it depends on a lot of things like location, but you should be able to get it for at least 1/2 that. Shopping around and dickering pays.

Most internet sales places I have seen have been outrageous BTW.

I pay 2.75-3.00 a foot for 2" .120 wall HREW .. hows that compare to other areas?

Originally posted by DougO
I pay 2.75-3.00 a foot for 2" .120 wall HREW .. hows that compare to other areas?

Never bought 2", but 1.75x.120 HREW is about $1.20/foot from a supplier in town.

Originally posted by Shrock
$6/ft is a joke.

but he didn't tell you what the $6 a ft stuff was did he ;) it was sometihng along the lines of DOM, 250 walled... 4in ;)

I was quoted $14.25 a foot for DOM 2" .120. A friend ordered 1200 ft from out of state and sold the same shiat to me for $3 a foot.

I get my 2"x .120 hrew for 1.68 a foot, not too bad I guess. I asked about DOM and they laughed, said I had to go to spokane (400 miles away) for it:eek: :eek: yeah, right

spokane... HA! ever heard of this little town called centralia? bout 20 min away :D dan found the best local price short of buying a 1/2 truckload (29k)

ya gotta stop by and get some info dude :D

u got any more of them there pictures:p

I know, I just couldn't believe capital industrial couldn't get me any DOM, or at least that's what one of em said. :flipoff2: bastards.



:flipoff2: :D :flipoff2: :D :flipoff2: (Is that right dave):flipoff2:

zig's down town has DOM lots of $$$ though


:massey: