http://www.tak-cs.com/cl/header2_sm.jpg

We are offering a complete front and rear R&P set plus master install kits for either the Rubicon or Non-Rubicon JK (D30 or D44 front). These gears are Sierra Gear and are 8620 heat treated alloy with a 2yr manufacture warranty and the master install kits have Timken bearings. These gear sets are not made in China, like some of the lesser expensive sets out there are.

Your choice of 4.88~5.38 gears shipped in the lower 48 US via UPS ground for $575.00. We have lockers as well, if you want to upgrade at the same time. Don't pay more for a name. I would put these gears up against any std currently marketed (not specialty kryo'd) gear sets.

Let's throw out a set (4.88~5.13: up to 4.88 for D30F) for the CJ, YJ, TJ, LJ, XJ crowd as well for $530.00. Same deal shipped less taxes, if applicable. For the TJ/LJ Rubicon models add $59.00.


Thank you very much! I am grateful for your business.

Allen

Edit for new pricing. Get 'em while they last. Oh yeah! Don't forget applicable taxes where required.

Good Morning!

10.5 14 bolt 5.38 gears for 4.10 carrier with full install to 32603 please

could i please have a price on gears for a jeep TJ rubicon (dana 44) front and rear 4.88s shipped to 33323

could i please have a price on gears for a jeep TJ rubicon (dana 44) front and rear 4.88s shipped to 33323

PM Sent!

how about a set of 5.13 or 5.38 for a hp dana 60 and 14 bolt with master install kits shipped to 95747

how about a set of 5.13 or 5.38 for a hp dana 60 and 14 bolt with master install kits shipped to 95747

PM Sent! Thanks

Top!

How much for a chromoly GM/Wagoneer Stub shaft 19 spline 9.92in shipped to 95993.

How much for a chromoly GM/Wagoneer Stub shaft 19 spline 9.92in shipped to 95993.

PM Sent!

Going up!

Time to gear up!

What gears do you need?

4:56 gears for a dana 30 hp with install kit, 4:56 gears for 8.8 with install kit shipped to 06776

Jeep Thick cut or rubicon rear Dana 44 4.88s with install kit and 4.88 gears for a HP30 with install kits to 23453

I need Dana 60, 4.88s.


For Standard 4.56 carrier Dana 60.

Shipped to 94521

I need Dana 60, 4.88s.


For Standard 4.56 carrier Dana 60.

Shipped to 94521

Want an install kit with that?

Allen

No, just the gears.

All PM's Sent Thank You!

Time to re-gear and get back that performance on and off-road. Axle shafts, lockers, and more.

I am very grateful for your business.

Allen

10.25 5.13's and master install kit shipped to 29803 please?

Alan, got a couple projects I need some pricing for:

1) 4.27/ 4.30 R&P w/ install kits for Ford Dana-44 front/ small bearing 9" rear. Chomo axles and good U-joints for Early Bronco Dana-44 (stock EB width). Also could use an open carrier for 4.10 & up gears for the D-44 to use w/ an Aussie Locker, used would be fine. (Built '69 Bronco looking to re-gear)

2) 5.13 R&P for full width HP D-44 w/ install kit & RCV axle set for same front end (also a set of Warn 30 spline hubs for the RCVs). 5.13 R&P for full width BB 9" w/ install kit. 35 spline spool for '77 F-150 9" (if you can get it). ('68 Bronco crawler project)

Shipping is to 96744 Oahu, HI!... Ouch...

Thanks,
Fungus

P.S. Lookin' to support my Norcal business folks as I'm a Chico native and will be back in a few years...

Need 4.56 R&P and install kit for front Chevy Dana 60 with 4.10 carrier. 75028

Thanks,

Alan, got a couple projects I need some pricing for:

1) 4.27/ 4.30 R&P w/ install kits for Ford Dana-44 front/ small bearing 9" rear. Chomo axles and good U-joints for Early Bronco Dana-44 (stock EB width). Also could use an open carrier for 4.10 & up gears for the D-44 to use w/ an Aussie Locker, used would be fine. (Built '69 Bronco looking to re-gear)

2) 5.13 R&P for full width HP D-44 w/ install kit & RCV axle set for same front end (also a set of Warn 30 spline hubs for the RCVs). 5.13 R&P for full width BB 9" w/ install kit. 35 spline spool for '77 F-150 9" (if you can get it). ('68 Bronco crawler project)

Shipping is to 96744 Oahu, HI!... Ouch...

Thanks,
Fungus

P.S. Lookin' to support my Norcal business folks as I'm a Chico native and will be back in a few years...

Need 4.56 R&P and install kit for front Chevy Dana 60 with 4.10 carrier. 75028

Thanks,



PMs sent to you guys! Thank you! I am very grateful for your business.

Allen

Price for 4.56 ring & pinon w/installation kit
jeep tj dana30 front & dana44 rear
to 96932

Bump for the tax day deal.

Allen

http://www.tak-cs.com/cl/header2_sm.jpg

We are offering a complete front and rear R&P set plus master install kits for either the Rubicon or Non-Rubicon JK (D30 or D44 front). These gears are Sierra Gear and are 8620 heat treated alloy with a 2yr manufacture warranty and the master install kits have Timken bearings.

Your choice of 4.88~5.38 gears shipped (excluding applicable taxes) in the lower 48 US via UPS ground for $625.00. We have lockers as well, if you want to upgrade at the same time. Don't pay more for a name. I would put these gears up against any std currently marketed (not specialty kryo'd) gear sets.

Let's throw out a set (4.88~5.13: up to 4.88 for D30F) for the CJ, YJ, TJ, LJ, XJ crowd as well for $539. Same deal shipped less taxes, if applicable. For the TJ/LJ Rubicon models add $62.00.

Click here (http://www.tak-cs.com/cl/ARB Sale Pricing.pdf) for the "ARB Pricing PDF." This PDF contains both Jeep and other models.

Thank you very much! I am grateful for your business.

Allen


Bump for new terms on sale.

:beer:

Allen

bump for new pricing!

Thank you!

Allen

Planning on bigger tires for this holiday season? Then you need to re-gear to get back the power and crawl ratio. Don't be left behind on the way to the trail or when getting into traffic. Re-gearing is the most economical way to get back that power.

PM for your re-gear set today!

Thank you very much! I am grateful for all the orders.

Allen

Time to re-gear after the new tires for Christmas. Be ready for when the trails open, if not for snow wheeling.

thank you for your business and have a blessed and prosperous day!

Namaste,

Allen

Great deal on these gears. Don't be shy. Order up!

Namaste,

Allen