|
tony cordell 08-25-2009, 12:38 PM Original O rings failing as oil exiting solenoid, I remember in the past reading of a Quad seal or S type seal to replace the O rings. Can someone point me to a supplier as a search has failed to find anything. lutz 08-25-2009, 03:21 PM i would call ARB they have good customer service.I had a rd126 that was having o ring problems they help me out fix the problem and set me 4 sets of o rings for free. FiveO Disco 08-25-2009, 09:58 PM Original O rings failing as oil exiting solenoid, I remember in the past reading of a Quad seal or S type seal to replace the O rings. Can someone point me to a supplier as a search has failed to find anything. Mine has the same problem. Have been told it is a vent problem, so I enlarged the vent system as I was told to do by various vendors/people. Just got back from Moab and some pretty good wheelin and still have the problem. Let me know if the new seal fixes the problem. Cheers Andy muskyman 08-26-2009, 02:26 PM How much did you enlarge the breather? I have not had a issue on my truck or any of the others once I installed a real breather line. I have the RD56's FiveO Disco 08-26-2009, 11:24 PM Musky, I enlarged the line to 3/8s and the modified the banjo considerably. I routed the line and breather into the cab. I have a hard time believing it's not getting enough ventilation now. I guess it could be left over oil in the line but I've cleaned it out several times. Cheers Andy muskyman 08-27-2009, 09:41 AM pitch that fucking bango and the fitting that it connects to!! thats your neck down! tony cordell 08-27-2009, 04:07 PM What did you use for a breather connection please? Did you re drill the axle tube? | |